• Korean Journal of Environment and Ecology
• /
• v.15 no.4
• /
• pp.369-378
• /
• 2002

To investigate the forest structure and to suggest the basic data of forest in the Baekcheon Valley, fifty plots were set up and surveyed According to the analysis of classification by TWINSPAN. the community was divided by five groups of Quercus mongolica-Pinus densiflora(I), P. densiflora-Q. mongolica(II), Acer pseudosieboldianum-Q. mongolica(III). Betula schmidtii-A. pseudosieboldianum(IV), and Cornus controversa community(V). The structure of communities was investigated using importance value by layers The survey results were summarized as follows: 1) the results of annual ring analysis revealed that the age of Pinus densiflora forest was about 50~75 years old and Q. mongolica forest was about 40 years. 2) number of the average species was 11 1$\pm$2.2 and number of average individual was 74.6$\pm$28 1 per a plot(100$m^2$). From the above results including DBH distribution analysis it was anticipated that the deciduous broad leaf tree like C. controversa and B. schmidtii will be climax species instead of Q. mongolica. and P. densiflora.

• Journal of the Korean Wood Science and Technology
• /
• v.21 no.2
• /
• pp.73-80
• /
• 1993

Pinus koraiensis is one of the most important reforestation species which had widely been planted around the country. Therefore, there are great research needs on the fundamental properties of wood to extend the frequency of uses and adequate availabilities. Research results on the characteristics of anatomical wood properties and changes are summarized as follows: 1. At a horizontal direction of tree trunk, the tracheid length at outer wood gradually becomes shorter as it reaches to pith. The tracheid length having between 32 and 42 annual rings showed over 2.5 times longer than that of pith, and also its length increases from the bottom to the top of the stem. 2. The tracheid diameters in latewood showed a little fluctuations, and the shortest near to the pith in earlywood. The tracheid diameters in earlywood are more than 2 times those of latewood, and the differences between the mature and juvenile wood in earlywood are less than 10${\mu}m$. 3. The tracheid wall thickness in early wood showed a little fluctuations. On the contrary, tracheid wall thickness in latewood rapidly increases from the pith to the bark. The tracheid wall of mature wood showed 10 to 20% thicker than that of juvenile wood. 4. The fibril angle at the secondary walls of tracheid within an annual ring showed higher degree in earlywood than that of latewood. The highest tracheid fibril angle was observed at around the pith of both earlywood and latewood. Then, fibril angle slowly decreased toward outer wood, and was stabilized after 15 years. 5. Structural boundaries between mature and juvenile wood from Pinus koraiensis are divided by 13 to 19 annual ring and distance of 5 to 8cm from the pith.

• Journal of Forest and Environmental Science
• /
• v.25 no.1
• /
• pp.1-24
• /
• 2009

Teak (Tectona grandis) is one of the most valuable timber yielding species in the world, with predominant distribution in tropical or sub-tropical countries. However, natural teak available only in few countries like India, Myanmar, Laos People's Democratic Republic and Thailand. Teak grows well in deep, well-drained alluvial soils, fairly moist, warm, tropical climate with pH ranges from 6.5-7.5. Teak is cultivated in many Asian, African and South American countries for timber production. The global teak plantations are estimated to be three million hectare with major share in India (44%) followed by Indonesia (33%). India is considered as richest genetic resources of teak with large areas of natural teak bearing forests (8.9 million ha), plantations (1.5 million ha), clonal seed orchards (1000 ha) and seed production areas (5000 ha). The studies on diversity of teak populations showed that teak is an out crossing species with major portion of diversity present within the populations. The productivity and quality of teak timber varies depending upon the site and environmental conditions. Teak wood is moderately heavy, strong and tough,straight grained, coarse textured and ring porous with specific gravity varies from 0.55 to 0.70. The sapwood is white to pale yellow in colour and clearly demarcated while heartwood is dark brown or dark golden yellow in colour. Teak is one of the most durable timbers in the world, practically, impervious to fungus and white ant attack and resistant to decay. Teak wood is used in ship and boat constructions, furnitures and aesthetic needs. Genetic improvement programmes have been undertaken in countries like Thailand, India, Malaysia and Indonesia. The programme includes provenance identification and testing, plus tree selection and clonal multiplication, establishment of seed orchards and controlled hybridization. Several aspects like phenology, reproductive biology, fruit characteristics, silvicultural practices for cultivation, pest and diseases problems, production of improved planting stock, harvesting and marketing, wood properties and future tree improvement strategy to enhance productivity have been discussed in this paper.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.6
• /
• pp.659-665
• /
• 2014

Wood properties are affected by environmental factors such as soil and climate change. There were close relationships between mechanical properties and stand characteristics for Quercus serrata stands in Gyeongsangnam-do Province, Jeollanam-do Province and Je-ju island. Both compression and shear strengths of woods showed a negative correlation with diameter at breast height (DBH) and the number of tree per hector, while they are positively related with with tree age, altitude, and drainage. The annual ring width was also negatively correlated with tree age, altitude, drainage, DBH, and tree height. However, anatomical characteristics of wood did not show much variation depending on the provincial regions. These results brought a conclusion that Quercus serrata in southern region could be useful forest resources for the utilization of wood.

• Journal of Ecology and Environment
• /
• v.43 no.3
• /
• pp.320-331
• /
• 2019

Background: Dioecious plant species having both male and female plants have been investigated regarding sex-related characteristics such as sex ratio, sex-differential resource requirements, and spatial segregation of the sexes. Habitat loss and fragmentation are major threats to the survival of plant populations, but dioecious species are particularly more prone to such habitat degradation than non-dioecious species because of their dimorphic sexual system. We examined the sex-related demographics of two Ilex cornuta populations being different regarding land use history. Methods: During 2016-2017, we examined I. cornuta trees with a basal diameter ${\geq}1.5cm$ in the Yongsu-ri population (YS population) and the Gotjawal Provincial Park population (GP population). Plant sex (male, female, or unsexed) was identified. The tree size (basal diameter and height of the main stem), clonal production (the ramet numbers per genet), and vitality for each clone were measured. The associations between population, sex, tree size, clonal production, and vitality were examined using ANOVAs and contingency table analyses. Finally, point pattern analyses using O-ring statistics were conducted to assess spatial patterns. Results: Upon excluding unsexed trees, the YS population with 74 trees was significantly male-biased (0.66), while the GP population with only 26 trees had a 1:1 sex ratio. In both populations, males and females did not differ in tree size. Although the mean number of ramets differed significantly between populations, females tended to produce more ramets than males. The proportion of weak trees was significantly higher in the YS than in the GP population. Neither population showed evidence of spatial segregation of the sexes. Conclusions: The two populations of dioecious I. cornuta are characterized by the small number of trees and relatively high frequencies of non-reproductive trees. Both indicate that these populations are quite susceptible to environmental and genetic stochasticity. On the other hand, the differences between populations in sex ratio, clonal production, and vitality suggest that conservation efforts for I. cornuta need to be population-specific. In order to help recover and enable this vulnerable species to persist, it is necessary to find ways to enhance their sexual reproduction and simultaneously reduce habitat disturbances due to anthropogenic activities.

• The Korean Journal of Ecology
• /
• v.26 no.1
• /
• pp.34-38
• /
• 2003

An analysis of tree ring series of a lace-bark pine (Pinus bungeana Zuccarini) was carried out to find out the exact age of the tree, to describe life history of the tree affected by the change of past environmental factors, and to explain the relationships between the growth fluctuation of the tree and the change of environmental factors of the past. This study explicitly showed that the tree was about 300 years old in 1992 and that the previous estimate of the age to be about 630 years old has no ground to be justified. This was also ascertained by the close correspondence of the tree growth fluctuation to the fluctuation of soil moisture related environmental factors for the last 80 years in Seoul. Although it is clear that the tree suffered from slow growth for about 30 years initiating from the 1910s, it is not sure whether the soil moisture deficits or droughts during the years of 1910-1913 played a major role in causing the decline of the trees afterwards. Discussion was further extended for defining active roles for the Cultural Properties Administration of Korea in management and research to effectively protect the Old and Big Trees under the category of Natural Monument of Korea.

• Korean Journal of Environment and Ecology
• /
• v.16 no.2
• /
• pp.149-159
• /
• 2002

Dwarf bamboo(Sasa borealis) is a dominant understory species in the various forest types in Korea. The objective of this study was to investigate vegetation structure of Sasa borealis and effects of Sasa on the growth of overstory tree species along the forest development after clearcutting. Three representative stand types with and without S. borealis in Baekwoonsan, Chonnam province were selected in 1998 for this study: uncutting stands(natural deciduous forests with overstory vegetation), 1987-cutting stands (11 years after clearcutting), and 1993-cutting stands(5 years after clearcuting). Vegetation type was largely classified into Sasa borealis dominant type and Sasa borealis recessive or absent type. The former composed of four associations including Quercus serrata-Carpinus laxiflora / Sasa borealis community, Cornus controversa-Morus bombysis / Sasa borealis community, Styrax japonica-Styrax obassia / Sasa borealis association, Zelkova serrata / Sasa borealis community. The latter divided into six associations including Quercus serrata / Lindera erythrocarpa community, Cornus controversa / Lindera erythrocarpa community, Quercus serrata / Acer pseudosieboldianum / Deutzia glabrata community, Fraxinus rhynchophylla-Quercus serrata / Lindera erythrocarpa / Euonymus alataus community, Rubus crataegifolius-Hydrangea macrophylla community, Rubus crataegifolius-Lespedeza bicolor community. Distribution of Sasa, borealis by developmental stages of forests showed that in natural stands was dominant understory, but was various pattern in two cutting stands. Mean annual ring growth of Quercus serrata and Carpinus laxiflora during the last 35 years had not been affected by presence of Sasa, based on comparisons in annual ring growth between Sasa-present and Sasa-absent stands. In conclusion, dense crown of Sasa borealis suppressed the invasion of other shrubs or annuals and facilitated later stages of plant succession by promoting growth of shade-tolerant tree species after clear cutting.

• Journal of Forest and Environmental Science
• /
• v.14 no.1
• /
• pp.1-13
• /
• 1998

In this paper, it has been discussed on the relation between the anatomical features of woods and the penetration of methyl methacrylate monomer system into major Korean tree species, especially the Pinus koraiensis, Larix leptolepis, Quercus mongolica and Tilia amurensis. 1. There was some differences in penetration of polymers among different tree species, but generally the penetration of ring porous woods seems to be larger than that of diffuse porous woods and it was very difficult to penetrate to Larix leptolepis, especially to the that of heart wood. 2. The penetration on transeverse surface was relatively easy but radial and tangential impregnation were somewhat hard and differences between them were negligible. 3. The penetration of sapwood was larger than that of heartwood and its differences varied according to the existence of tyloses or contents in vessel. 4. Generally the polymer penetration of earlywood was larger than that of latewood in ring porous woods, but on the contrary, penetration of earlywood was small than that of latewood on diffuse porous woods. 5. Vessel diameter of wood had nearly no relation to polymers penetration. This seems to come from the reason that effective vessel diameter varies with the existence of tyloses or contents in vessel. 6. The penetration of ray tracheids was larger than that of ray parenchyma cells in softwoods, but penetration of hardwood rays seems to be small in comparison with softwood ray parenchyma cells. 7. Specific gravity and annual ring width had no relation to the penetration of polymer.

• Korean Journal of Environment and Ecology
• /
• v.33 no.5
• /
• pp.565-577
• /
• 2019

The purpose of this study was to understand the factors influencing the decline and the patterns of changes in Abies nephrolepis populations on Mt. Seorak. We installed permanent quadrats in the areas of the Gwittagicheongbong (peak), Gwanmoneungseon (ridge), and the Seorak Falls and have monitored the community structure, population dynamics, radial growth, and vitality in the quadrats since 2009. Excluding the Seorak Falls, the three research sites showed a three-layer structure in which the low-tree layer forms the canopy. Major tree species were Khingan fir, Korean arborvitae, Mongolian oak, Erman's birch, and Korean maple. The significance of Khingan fir in Seorak Falls decreased from 45.3% in 2009 to 36.8% in 2018. The number of shoots ($DBH{\geq}5cm$) was highest at 1,800 individuals/ha and 1,700 individuals/ha at the Gwittagicheongbong 2 and the Gwanmoneungseon, respectively. The mortality rates over the past 10 years were very high, at 38.3% and 35.3%, respectively, in the Gwittagicheongbong 1 and Seorak Falls. The most stable inverse J-shaped distribution in the Gwittagicheongbong 1 area was shown in the size-frequency distribution of the Khingan fir populations. The average annual ring growth of the Khingan fir was 0.96 ~ 1.73 mm/year, and the ring growth tended to decrease in the areas of Gwittagicheongbong 1, Gwanmoneungseon, and Seorak Falls, where the vitality was low. If the monitoring process continues, it will be possible to obtain basic data for the conservation and management of subalpine vegetation.

• International Journal of Aeronautical and Space Sciences
• /
• v.17 no.4
• /
• pp.565-578
• /
• 2016

A probabilistic based systems approach is addressed in this study for the reliability prediction of solid rocket motors (SRM). To achieve this goal, quantitative Failure Modes, Effects and Criticality Analysis (FMECA) approach is employed to determine the reliability of components, which are integrated into the Fault Tree Analysis (FTA) to obtain the system reliability. The quantitative FMECA is implemented by burden and capability approach when they are available. Otherwise, the semi-quantitative FMECA is taken using the failure rate handbook. Among the many failure modes in the SRM, four most important problems are chosen to illustrate the burden and capability approach, which are the rupture, fracture of the case, and leak due to the jointed bolt and O-ring seal failure. Four algorithms are employed to determine the failure probability of these problems, and compared with those by the Monte Carlo Simulation as well as the commercial code NESSUS for verification. Overall, the study offers a comprehensive treatment of the reliability practice for the SRM development, and may be useful across the wide range of propulsion systems in the aerospace community.