• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.3
• /
• pp.77-84
• /
• 2012

It is known that some components of wood obstruct the hydration of cement when wood is mixed with cement. In order to examine the effect of pretreatment of wood chips in hot water, this study conducted the experiments for the setting and compressive strength of mortar by sieving pine wood chips with a 2.4mm sieve, dipping them in waters of different temperatures, and then using them as a part of the fine aggregate. For the experiments, water-cement ratio of the mortar was 0.50 and the amount of the fine aggregate substituted by wood chips was set at 0%, 2%, 4%, 6%, 8%, and 10% of the mass of the fine aggregate. As a result of the test, it was found out that when wood chips were used to substitute fine aggregate for the production of mortar, more usage of wood chips postponed setting more, and the treatment of wood chips with water improved the problem of the delay in setting time. Especially, the final setting time of the mortar which used 2~6% of wood chips treated in $100^{\circ}C$ water for 30 minutes was almost the same as the final setting time of the mortar which used no wood chips. Also, the compressive strength of the mortar which used the wood chips treated with water was compared to that of the mortar which used the wood chips not treated with water. The result showed that the strength improved for age of 7 days and 28 days, while there was little change in strength for age of 3 days.

• Journal of Photoscience
• /
• v.9 no.2
• /
• pp.527-529
• /
• 2002

Photodynamic therapy (PDT) is a medical treatment using laser and photosensitizing drug taken up to destroy cancer cells. Singlet oxygen ($^1$0$_2$) generation is strongly related to this treatment. We have built a direct detection system monitoring feeble luminescence, in the near IR region, from $^1$0$_2$, We have comparatively studied the photophysical and photochemical properties in solution of a newly developed drug ATX-S10 and Photofrin already investigated clinically. We demonstrdted that ATX-S10 was capable of efficiently yielding $^1$0$_2$, which may lead to highly efficient PDT treatment. Successive laser excitation photobleached ATX -S10 readily in a dose-dependent manner. This result shows that ATX -S10 is useful in setting up suitable medical treatment conditions to minimize side effects.

• Journal of Trauma and Injury
• /
• v.33 no.2
• /
• pp.124-127
• /
• 2020

Major bleeding caused by vascular injuries of the abdominal aorta or its branches after blunt trauma often leads to mortality or major morbidity. We report a case that lumbar artery injury following blunt trauma was spontaneously resolved without any surgical or interventional treatment. Lumbar artery injury after blunt trauma could be treated conservatively without surgical or interventional treatment in a selected case. When an aortic or its branch injury was suspicious, diagnostic angiograms in the setting of interventional treatment may be helpful to decide an appropriate treatment modality.

• Sleep Medicine and Psychophysiology
• /
• v.10 no.1
• /
• pp.26-31
• /
• 2003

Restless leg syndrome (RLS) and periodic limb movement of sleep (PLMS), often concurrent, come under diagnosed disorders of sleep and treatable condition. RLS symptoms are evoked in the limbs at rest and increase in the evening and during the night. PLMS is characterized by periodic episodes of repetitive limb movements caused by muscle contractions during sleep. RLS is often associated with a sleep complaint and PLMS. Both RLS and PLMS represent one of the most commonly encountered sleep disorders in a primary care setting. The circadian rhythm and the presence of PLMS cause sleep disturbances in RLS. The emphasis on pathophysiology includes consideration of central nervous system localization, neurotransmitter, and the role of iron metabolism. Dopaminergic agents are considered the treatment of choice for RLS and PLMS. With proper diagnosis and effective treatment patients' ability to fall asleep and maintain sleep improves, and their sense of well being increases.

• The Journal of Korean Academy of Sensory Integration
• /
• v.10 no.1
• /
• pp.33-44
• /
• 2012

Objective : The aim of the study was to investigate the job satisfaction of occupational therapists(OTs) who work in sensory integration treatment setting, and to analysis for factors influencing the satisfaction. Methods : Data were obtained from 62 OTs who had registered Korean Academy of sensory integration through a survey. Results 1 : Job satisfaction according to general characters: OTs who were above 35 years old and take the treatment course for sensory integration felt the highest total job satisfaction. OTs who are above 35 years old and have clinical experience under 12 month felt the highest salary satisfaction. OTs who are under 25 years old felt the highest promotion satisfaction. Female OTs felt higher colleagues relationship satisfaction than male OTs. 2. Job satisfaction according to work environment: OTs who work with 5 to 10 colleagues and work at private clinic felt the highest total job satisfaction. OTs who spend time treating patients more than 45 hours per week and work at private clinic. OTs who work with 5 to 10 colleagues felt the highest promotion and institute satisfaction. OTs who work at the disabled children care center considered change their job more than others. Conclusions : To improve job satisfaction of OTs, we need to consider size of organization, type of institutes. And we have to define role and specialty of OTs who work in various sensory integration treatment setting.

• Korean Journal of Biological Psychiatry
• /
• v.8 no.1
• /
• pp.47-52
• /
• 2001

It is known that the personality is the crucial factor in the treatment outcome of depression. The authors tried to identify the results of such studies and various components which determine the treatment outcome of depression. Nearly 60 papers published between the year 1990 and 2000 about the treatment of depression and personality were reviewed. Among them about 30 papers were selected to compare the research methods, results and discussions. The arguments and critics of the papers were discussed. In the many debates, the authors admitted the fact that premorbid personality trait influences the treatment outcome of depression negatively regardless of treatment method. Subtyping of depression is feasible along the presence of good or bad predictors of treatment outcome for depression. Differentiation of depression and personality seems to have no problem, however test of personality state before the development of psychiatric disorder such as depression is not amenable. For example, cluster A personality trait is often misunderstood as depression in clinical setting. In some cases cognitive behavioral therapy is effective in the treatment of depression accompanying personality disorder. The authors insist that the analysis of personality in the dimensional aspect rather than in the categorical aspect gives more information in the research of personality influencing the treatment outcome of depression. In addition, the reason why we understand the relationship between depression and personality were discussed.

• Journal of Korean Clinical Health Science
• /
• v.9 no.2
• /
• pp.1486-1492
• /
• 2021

Purpose: By investigating oral health knowledge and oral health behavior of orthodontic patients, we intend to identify factors that affect their satisfaction with orthodontic treatment and use them as fundamental data for improving the satisfaction of orthodontic patients. Methods: Busan from February 1st to March 31st, 2021. Dental disease in Gyeongsangnam-do. A self-contained survey was conducted on patients undergoing orthodontic treatment in the clinic. A total of 185 copies were analyzed. Using the lBM SPSS Statistics 21 program, multiple regression analysis was conducted by setting oral health knowledge and oral health behavior as independent variables to determine factors affecting remedial treatment satisfaction. Results: The satisfaction level of orthodontic treatment was 1.53 points higher than 'understanding the cost of orthodontic treatment' and 'smooth relationship with related staff while receiving orthodontic treatment' was low at 1.23. The average calibration satisfaction was 1.34. Factors affecting remedial treatment satisfaction were shown in the order of oral health behavior (p<0.000), educational experience (p<0.010), gender (p<0.015) and oral health knowledge (p<0.020). Conclusions: Through the above results, it is necessary to develop programs to improve oral health knowledge through customized individual oral health education by enhancing individual oral health behaviors of individuals.

• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.2
• /
• pp.233-238
• /
• 2014

Purpose : The Varian's Eclipse radiation treatment planning system is able to correct radiation treatment thought leaf gap which is limitation MLC movement for collision with both MLC. In this study, I'm try to analyze dosimetric effect about the leaf gap in treatment planning system. And then apply to clinical implement. Materials and Methods : The Elclipse version is 10.0. In general, the leaf gap set to 0.05~0.3 mm and must measurement each leaf gap. The leaf gap measured by each LINACs and photons. We applied to measured each leaf gap in IMRT and VMAT. Changing the leaf gap, we evaluated treatment plans by Dmax, CI, etc. Results : When the same plan was evaluated with changing the leaf gap, an increase of 2-5% over the value Dmax, CI increases mm to 0.0~0.50 mm leaf gap. Volumetric modulated and intensity modulated radiation therapy plans all showed the same trend was not found significant between each radiation treatment planning. Conclusion : Generally, the leaf gap setting has a unique measure of the Multileaf collimator. However, the aging of the Multileaf collimator, calibration, and can be changed, after inspection and repair of the lip gap should eventually because these values affect the treatment plan must be applied to the treatment after confirmation. In some cases, may be to maintain the initial setting value of the lip gap, which is undesirable because it can override the influence on the treatment plan.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1475-1480
• /
• 2007

In the last few years, lasers have found new applications in production engineering as tools for surface treatment, cutting, welding, drilling and marking. So far, the laser has mainly been used in special laser processing machines ('laser-only') directly integrated into a production line or serving as stand-alone stations in the workshop. By combining conventional metal cutting technologies with laser processes in one machine, complete processing of a workpiece with different technologies in one setting can be realized. The main advantages are a reduction of the material flow between the production machines, which leads to a reduction in processing time and logistics, and an enhancement of manufacturing quality due to the processing in one setting. In addition to this approach new processing technologies such as laser-assisted machining are possible.

• Korean Journal of Child Studies
• /
• v.24 no.2
• /
• pp.63-78
• /
• 2003

Participants in this study of variables that contribute to child abuse were parents of 1,094 families with children under the age of 18. The instrument, Straus's Parent-Child Conflict Tactics Scales(1998), consists of 3 subscales : physical abuse, emotional abuse, and neglect. The degree of child abuse varied by age of child and parents, parents' marital satisfaction, the stress of bringing up children, social support, and family setting. There was a higher tendency to child abuse among alcoholic parents, dissatisfaction with marriage, parental child rearing stress, and isolation from social support. Educational and social welfare suggestions were made for the prevention and treatment of child abuse.