• 대한환경공학회지
• /
• 제36권8호
• /
• pp.579-587
• /
• 2014

수계에서 검출되는 미량유해물질의 빈도와 종류가 다양해지고 있다. 따라서 정수처리시스템에서 고려되어야 할 부분으로 거론되고 있으며 제거공정과 처리효율에 대한 연구가 활발하게 진행되고 있다. 본 연구에서는 고도처리공정과 나노여과공정을 이용한 제거효율을 평가하였다. 나노여과공정의 경우 물질의 물리화학적 특성에 따라 제거율이 상이하게 나타났다. 물질의 분획분자량이 제거율이 가장 큰 영향을 미치는 것으로 확인되었다. 또한, 원수의 pH보다 높은 pKa 값을 갖거나 Log Kow 값이 2 이하인 물질의 제거효율이 감소되었다. 고도처리공정 중 산화공정에서는 대상물질의 분자량이 클수록 그리고 소수성을 띌수록 산화반응에 의한 제거효율이 감소되었다. 흡착공정에서는 산화되지 않은 대부분의 물질이 제거되었으며 $H_2O_2$에 의하여 산화가 더 잘 진행될수록 흡착반응이 향상되었다.

• 한국산학기술학회논문지
• /
• 제7권3호
• /
• pp.440-447
• /
• 2006

본 연구의 목적은 미나리와 끈상 미생물접촉재를 이용하여 생활하수의 하수처리장 방류수의 수질 개선을 위함이다. 최종 방류수의 수질을 개선하기 위한 침전조 모형 플랜트를 2개 제작하여 실험하였는데, 하나(Tank 1)는 기존 하수처리장 침전조와 같게 제작 하였으며, 다른 하나의 침전조(Tank 2)는 침전조의 수초섬 상부에는 미나리를 식재하고 하부에는 끈상 미생물 접촉재를 배치하였다. 유기 오염물질인 BOD, 부유고형물질인 SS, 질소 그리고 인에 대한 고도처리 효율을 검증하였다. 실험 결과 Tank 2에서 유출되는 배출수가 Tank 1에서 배출되는 유출수보다 처리 효율이 향상되었다. 처리 효율을 살펴보면, Tank 1보다 Tank 2 유출수의 BOD는 $7.9%{\sim}38.8%$가 향상되었으며, 부유고형 물질인 SS는 $14.3%{\sim}60.0%$ 향상되었다. 부영양화 물질인 T-N은 $9.6%{\sim}31.5%$ 향상되었으며, T-P는 $33.0%{\sim}80.0%$까지 향상되었다. 처리 효율로 판단하면 T-P와 SS 제거효율이 BOD와 T-N보다 높았다.

• 한국환경기술학회지
• /
• 제19권6호
• /
• pp.543-549
• /
• 2018

본 연구는 정수처리장의 유기막의 처리수와 원수의 블렌딩된 혼합시료를 이용하여 무기막 처리 시 flux의 량에 따른 처리 효율을 실험실 수준에서 규명하였다. 각각의 설정된 블렌딩과 flux의 값에 따라 어떠한 성능을 내는지 고찰하고, 이를 바탕으로 각 측정항목에 따른 최고의 효율을 도출하였다. 처리원수의 수질과 처리량에 따라 서로 다른 처리효율을 보였으며, 특히 탁도제거에 큰 효율을 보였다. 또한 $UV_{254}$의 경우 처리 원수와 flux에 따른 제거 효율이 최대 69 %에서 최소 48 %로 원수의 농도에 따라 다른 제거율을 보였으며, TOC와 DOC의 경우 원수의 값이 낮아 처리 효율이 최대 22 %와 28 %의 값을 나타내었다. 이상의 결과는 무기막 공정에서 오염물질이 효과적으로 제거되는 최적의 공정이 존재함을 시사하며, 대상 원수와 운전조건에 따른 최적화가 필요함을 보인다.

• 한국환경과학회지
• /
• 제14권7호
• /
• pp.683-689
• /
• 2005

The consecutive combination process of a biological process as the pre-treatment and a chemical process as the post-treatment is applied for the dyeing wastewater. The poor efficiency of biological treatment using pure oxygen makes the chemical treatment cost high. It is necessary to improve the efficiency of biological treatment in order to reduce the cost of chemical treatment. The purpose of this paper is to find the minimum dose of chemical reagent to fit the Discharged Water Quality Standards for the different biological treatment effluents. Results revealed that the minimum dosage of Fenton's reagent lead to save the cost of chemical treatment based on the guideline dose in the treatment plant. The possible maximum saving reagents was up to $70\%$ for the effluent of the pilot plant packed with the carrier imbedded microorganisms which were selected from the present treatment plant.

• 생명과학회지
• /
• 제11권4호
• /
• pp.316-320
• /
• 2001

Sonication tremendously improves the efficiency of Agrobacterium infection by introducing small and uniform fissures and channels throughout the targeted tissue. Using shoot tips of cotton as explants, the effect of sonication treatment and virulence genes in Agrobacterium tumefaciens on transformation efficiency was investigated. The pat gene which encodes resistance to the herbicide, glufosinate, was used as a selectable marker. Transformation efficiency was evaluated on th basis of survival rates of cocultivated shoot tips on selection medium containing 2.5 mg/l gulfosinate-ammonium(ppt) adn 25. mg/l Clavamax. Sonication from 5 to 15 second has a positive effect on shoop tip survival. However, whil virE as well as virG or vir GN54D showed an enhancement in transformation efficiency, virE,. virG resulted in the most significant enhancement. Overall, the combination of additional virG/virE gene and sonication treatment resulted in the most significant increase in transformation efficiency.

• Membrane and Water Treatment
• /
• 제10권5호
• /
• pp.387-394
• /
• 2019

Membrane distillation (MD) is one of the water treatment processes which involves the momentum, heat and mass transfer through channels and membrane. In this study, CFD modeling has been used to simulate the heat and mass transfer in the direct contact membrane distillation (DCMD). Also, the effect of operating parameters on the water flux is investigated. The result shows a good agreement with the experimental result. Results indicated that, while feed temperature is increasing in the feed side, water flux improves in the permeate side. Since higher velocity leads to the higher mixing and turbulence in the feed channel, water flux rises due to this increase in the feed velocity. Moreover, results revealed that temperature polarization coefficient is rising as flow rate (velocity) increases and it is decreasing while the feed temperature increases. Lastly, the thermal efficiency of direct contact membrane distillation is defined, and results confirm that thermal efficiency improves while feed temperature increases. Also, flow rate increment results in enhancement of thermal efficiency.

• Journal of Forest and Environmental Science
• /
• 제29권2호
• /
• pp.109-115
• /
• 2013

Fast-grown wood generally contains a high proportion of juvenile wood that results in inferior dimensional stability and durability against biological deteriorations. In the present research, the Acacia mangium wood from plantation forests in Vietnam was treated with high temperature in air. The effects of heat treatment on physical properties of Acacia mangium wood, including mass loss (ML), water absorption (WA), water-repellent effectiveness (WRE) and anti-swelling efficiency (ASE) were examined. The results showed that the dimensional stability and the water-repellent effectiveness are increased by about 15-46% and 8-18%, respectively. However, the mass and dimension of wood are decreased. The results also indicated that both treatment temperature and treatment duration significantly affect the wood properties of Acacia mangium. It is thus concluded that heat treatment demonstrates an interesting potential to improve the wood quality of Acacia mangium for solid timber products. This technology provides an environmentally safe method of protecting sustainable common woods to give a new generation of value-added biomaterials with increased stability without the use of toxic chemicals.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.559-562
• /
• 2006

A low-temperature solar thermal system assisting a biological nitrogen treatment reservoir was designed and field-tested. A large tank whose temperature was maintained at about $25{\sim}30^{\circ}C$ to enhance the performance of a biological nitrogen treatment process was heated by an array of flat plate solar collectors. Test results revealed that the overall collector efficiency was above 50% for the most cases tested. This high efficiency was possible owing to the relatively low collector temperature that can be traced back to the reservoir temperature. A substantial enhancement in nitrogen treatment was observed as a result of maintaining the reservoir temperature higher.

• 드라이브 ㆍ 컨트롤
• /
• 제19권1호
• /
• pp.8-15
• /
• 2022

The demand for the re-painting of steel bridges is increasing, but surface treatment is still centered on human resources for on-site re-painting processes. Worker safety accidents continue to occur because the work is performed in a narrow space. Recently, PS balls with excellent surface treatment have been used for blasting, but the working environment is poor due to the large amount of dust generated. In this study, an effective surface treatment method using impeller blasting equipment was developed. The correlation between steel ball size, impeller rotation speed, and exposure time was studied to optimize the efficiency of the surface treatment.

• 상하수도학회지
• /
• 제20권4호
• /
• pp.519-526
• /
• 2006

In this study, the major operating factors in SND(simultaneous nitrification and denitrification) using bioreactor packed with submerged cilia media and granular sulfur such as variation of nitrification rate, organic matter removal efficiency and denitrification efficiency in different DO concentration were mainly evaluated. Synthetic wastewater and actual sewage were used as influent wastewater. Experiment with synthetic wastewater as influent wastewater was divided into three phases with the adjustment of DO concentration. As the results, nitrification efficiency and T-N removal efficiency in the Phase 3(DO 1.0~2.0 mg/L) were 99% and 52.3%, which is significantly greater than those in other two phases. Also, loading rate and denitrification efficiency of SCPGS(Submerged Cilia media Packed with Granular Sulfur) were calculated as $0.44kg\;NO_3^--N/m^3-day$ and 50%, respectively. On the other hand, nitrification rate was decreased from 99% to 64% according to the DO concentration with the variation from 3.0~3.5 mg/L(phase1) to 0.4~0.6mg/L(phase2). Although the nitrification rate was decreased in 64% according to the variation of the DO concentration, T-N removal rate was rapidly increased to 49% by increasing of the denitrification efficiency. Experiment with actual sewage as influent wastewater was carried out to evaluate efficiency of SCPGS in real operation condition of full-scale sewage water treatment plant. At the time, T-N removal rate in this experiment and full-scale wastewater treatment plants were given by 43% and 20%, respectively. The above results indicate that SCPGS can be used as an advanced treatment process for economical efficiency considered.