• Advances in environmental research
• /
• v.5 no.3
• /
• pp.169-178
• /
• 2016

This study aimed at determining the treatability of high-strength wastewater (chemical oxygen demand, COD>4000 mg/L) using combined anaerobic-aerobic granular sludge in lagoon systems. The lagoon systems were simulated in laboratory-scale aerated and non-aerated batch processes inoculated with dried granular microorganisms at a dose of 0.4 g/L. In the anaerobic batch, a removal efficiency of 25% was not attained until the 12th day. It took 14 days of aerobic operation to achieve sCOD removal efficiency of 94% at COD:N:P of 100:4:1. The best removal efficiency of sCOD (96%) was achieved in the sequential anaerobic-aerobic batch of 12 days and 2 days, respectively at COD:N:P ratio of 200:4:1. Sequential anaerobic-aerobic treatment can achieve efficient and cost effective treatment for high-strength wastewater in lagoon systems.

• Journal of Korean Foot and Ankle Society
• /
• v.23 no.1
• /
• pp.6-11
• /
• 2019

As a result of the increased participation in recreational and competitive sports activity, the incidence of chronic lateral instability has risen. Because chronic ankle instability can cause significant comorbidity and increase the social cost, the interest in this issue is growing. Although there are well-documented and effective surgical treatments for managing this condition, conservative treatments are a viable first option in selected patients. Through conservative treatment, surgical treatments can be reduced or delayed without necessarily affecting the overall outcome, but the failure of conservative treatment results in the need for surgical treatment to reduce the long term complications. Appropriate postoperative rehabilitation is essential for adequate functional recovery, even when surgical treatment is required.

• Membrane and Water Treatment
• /
• v.13 no.6
• /
• pp.259-290
• /
• 2022

Carbon nanotubes (CNTs), due to their excellent physical, chemical and mechanical properties and their ability to prepare new membranes with attractive properties, have found applications in water and wastewater technology. CNT functionalization, which involves the introduction of different types of functional groups into pure CNTs, improves the capabilities of CNT membranes for water and wastewater treatment. It turns out that CNT-based membranes have many advantages, including enhanced water permeability, high selectivity and anti-fouling properties. However, their full-scale application is still limited by their high cost. With their tremendous separation efficiency, low biofouling potential and ultra-high water flux, CNT membranes have the potential to be a leading technology in water treatment in the future, especially in desalination.

• Journal of Preventive Medicine and Public Health
• /
• v.14 no.1
• /
• pp.3-12
• /
• 1981

To identify the changes in professional care patterns after the introduction of medical insurance in Korea, professional care in hospitals and clinics of two succeeding years were compared. The hospitals and clinics selected for this study were those which located in Seoul city. Hospitals were classified into 3 categories: university hospital, general hospital and hospital. The diseases selected for this study were acute appendicitis and normal delivery. They were selected because their disease courses are considered to be fairly stable. The variables used for this study were length of stay, total hospital costs, costs of each components of cares. The information used for this study was obtained from the official forms requested by the medical facilities to the Korea Medical Insurance Corporation. The two periods studied were 3 months of each year from March 1st to May 31st in 1979 and 1980, The total number of normal delivery studied was 289 in 1979, 301 in 1980 respectively and the acute appendicitis was 92 and 111 respectively. In order to compare the quantity of medical care between 2 study periods the insurance price scores of 1979 were converted to prices of 1980. For statistical test of difference between 2 periods T-test and Welch's test were used. The result of the study were briefly summarized in below. 1. No significant difference was observed in the average length of stay of both disease between two study periods in all types of hospitals. 2. No significant difference was observed in the average total hospital costs of both diseases in all types of hospital, but in the private clinic the average clinic costs was rather decreased significantly in 1980. 3. More cost decrease were seen than cost increase in 1980 in all types of facilities, More cost changes by items were seen in acute appendicitis than in normal delivery between two study periods. The total hospital costs can be devided into 2 portions: charges for drug and material and for physician. In normal delivery, costs for physician's charges was significantly decreased in almost all the hospitals and costs for drug and material were not changed significantly in all the hospitals in 1980. In the university hospitals, however, the costs for drug and material were increased significantly in 1980. The cost decrease for physician's charge were mainly due to the decrease in the costs of laboratory test, treatment and physical therapy. The increase in the costs for the drug and material in the university hospitals was mainly due to the increase in the cost for drugs for oral administration and injection. 4. The proportion of components of medical care in the hospital has not been changed significantly, however, the cost for injection in normal delivery was characteristically increased in 1980 in all hospitals studied. In general the proportion of the costs for drug and material was tended to increase and the costs for physician was tended to decrease in 1980. The increase in the costs for drug and material were considered to be due to increase in the cost for drugs for oral administration and injection. The decrease in the costs for physician were due to decrease in the costs of laboratory test, treatment and physical therapy. Above mentioned changes in hospital and clinic care patterns are considered to be mostly influenced by the review criteria set by the K.I.C. for the assessment of the fee request made by clinics and hospitals.

• Journal of Korean Society of Health-System Pharmacists
• /
• v.35 no.4
• /
• pp.409-417
• /
• 2018

Background : Febrile neutropenia (FN) is one of the side effects in the patients treated with chemotherapy, and the patients who have FN generally need immediate treatment with extended-spectrum antibiotics and hospitalization. Pegfilgrastim and pegteograstim, which are used for the prevention of FN as a granulocyte-colony stimulating factor (G-CSF), have been granted insurance coverage in the Republic of Korea for certain breast cancer patients using doxorubicin and cyclophosphamide (AC) from September 2016. Methods : The data of the patients with breast cancer using AC regimen and G-CSF were collected retrospectively. This study involves cost-utility analysis of pegfilgrastim and pegteograstim. In this study, we constructed a simple decision tree model for short-term observation and calculated quality-adjusted life year (QALY) and the direct medical costs from the medical provider's perspective. Results : From September 2016 to May 2017, 15 patients were treated with pegfilgrastim and 15 patients were treated with pegteograstim. As a result of dividing the average cost by QALY for each treatment group, it was observed that pegfilgrastim and pegteograstim were consumed 24,923,384 won and 22,808,336 won per 1QALY, respectively. Consequently, incremental cost effectiveness ratio (ICER) showed 2,115,048 won more per pegfilgrastim than pegteograstim per 1QALY, and the cost per 1QALY of both the drugs was lower than 30,500,000 won; the Koreans were willing to pay this amount. Conclusions : This study suggests that pegfilgrastim and pegteograstim can be used to improve the quality of life of breast cancer patients undergoing AC therapy. Among the two drugs, pegteograstim seems to be more cost-effective. However, since this study was conducted as a retrospective observation method on a small scale, it is associated with many limitations. Therefore, a long-term prospective cohort study is needed to supplement the present findings.

• International Journal of Advanced Culture Technology
• /
• v.3 no.2
• /
• pp.132-137
• /
• 2015

The purpose of this paper was to investigate the effects of solution treatment time and Sr-modification on the microstructure and property of the Al-Si piston alloy. It was found that as-cast microstructures of unmodified and Sr-modified Al-Si alloys consisted of a coarse acicular plate of eutectic Si, $Cu_3NiAl_6$ and $Mg_2Si$ phases in the ${\alpha}$-Al matrix but different in size and morphology. Both size and inter-particle spacing of Si particles were significantly changed by increasing of the solution treatment time. After a short solution treatment, the coarse acicular plate of the eutectic Si appears to be fragmented. Fully modified microstructure of Sr-modified alloy can reduce the solution treatment time to shorter compared to unmodified alloy. The maximum of a peak hardness value is found in the very short solution treatment of both Al-Si piston alloys. Compared to 10 h solution treatment, the solution treatment of 2-4 h is sufficient to achieve appropriate microstructures and hardness. The short solution treatment is very useful to increase the productivity and to reduce the manufacturing cost of the Al-Si piston alloys.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7227-7236
• /
• 2015

The survey revealed that, due to the discharge characteristics of seafood wastewater, irregular inflow loads were caused, making it difficult to treat the wastewater safely. It is crucial for the operation of pressure and floating tanks for the treatment of high-concentration organic wastewater such as seafood wastewater. The survey of operation factors for the pressure and floating tanks revealed this: A/S ratio 0.05 (design criteria 0.01), the pressurized air pressure 8bar(design criteria 6bar), the pressure tank pressure 6bar (design criteria 4.5bar), and HRT 60sec(design criteria: 10sec). Also, the recirculation rate was changed to over 40%(design criteria: 30%), and the surface load rate was changed to under $13.7m^3/m^2{\cdot}hr$(design criteria: under $17.7m^3/m^2{\cdot}hr$); thus, compared to the initial design criteria, the operation factors were changed according to inflow characteristics, thus enhancing the pressure and floating tank performance. The survey of inflow load revealed BOD 140.7%, $COD_{Mn}$ 120.32%, and SS 106.3%, compared to the inflow design criteria, as well as T-N 135.5% and T-P173.3%, higher than the design criteria. The survey of the treatment facility annual operation cost revealed high portions in sludge treatment cost(27.7%) and chemicals costs(26.0%), and the sludge treatment cost will likely further increase due to the ban on ocean dumping. The unit cost for the treatment of seafood wastewater was found to be KRW 3,858 per ton, more than 27 times higher than the sewage treatment cost(KRW 142.6/ton), presumably because the seafood wastewater contains high-concentration organic substances and nutritive salts.

• Journal of Powder Materials
• /
• v.5 no.4
• /
• pp.293-298
• /
• 1998

In all larger hardmetal workshops furnaces for dewaxing, vacuum sintering or vacuum and overpressure sintering are today's standard. The furnace technology is well established. Equipment specifications such as operating overpressure, determine sintering cost, product quality, safety and reliability of the furnace and ultimately influence the competitiveness of the hard metal procucer in the global market. Essential furnace requirements are an efficient utilization of the furnace, an environmental friendly dewaxing system, high temperature uniformity, metallurgical treatment with process gases, as well as reduced cooling time by means of rapid cooling. Examples of reduced sintering costs are described achieved using a new design of vacuum sintering furnace with an improved rapid cooling device, cooling times are reduced by up to 45%. Additionally, a cost comparison of two different designs of vacuum overpressure sintering furnaces are included.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.17 no.29
• /
• pp.47-61
• /
• 1994

Today, we can see the more serious industrial accidents than in the past according to the high growth rate of industrial society. Therefore, from the corporate as well as the human viewpoint it pays to have workers adequately trained and safety - oriented. The cost of accidents is high in terms of medical insurance costs lost time on the job, legal fees for court cases, workers' compensation, disability insurance, and unemployment compensation. The cost of preventing occupational accidents or illnesses is much less then the cost of treatment or workers' compensation. In this study, we investigate the situations of industrial accidents and safety control of 277 coporates in Busan, analyze the causes of accidents and propose the countermeasures to each of causes.

• Journal of Korean Society of Water and Wastewater
• /
• v.14 no.1
• /
• pp.76-83
• /
• 2000

This research is about wastewater containing non-biodegradable TDI(Toluene Diisocyanate) that is treated by the activated carbon adsorption method. In the case of the Fenton oxidation process being applied to the existing process, optimal pH, reaction time, chemical dosing amount, removal rate, and cost were investigated. A pilot plant test was applied after finding optimal conditions with lab experiments. The optimal conditions were pH 3~5(COD removal rate 84~88%) and reaction time 30min~1hr. In higher $H_2O_2$ dosing amount, COD removal rate was a little higher. But there was little difference in the removal rate according to $FeSO_4{\cdot}7H_2O$ dosing amount. Treatment cost was economical in the case of the Fenton oxidation process being operated earlier than activated carbon adsorption system. But chemical dosing point, chemical mixing effect, chemical dosing amount, removal rate, and the cost of facility and others must be considered in practical process.