• Journal of agriculture & life science
• /
• v.51 no.1
• /
• pp.187-192
• /
• 2017

In various crops, seedlings are preferred to seeds for faster and more effective growth, so transplanters are used for them. This 2-row transplanter was developed to promote the mechanization of vegetable transplanting work which depends on human power. and it can automatically supply seedling tray and transport picked up seedling to the planting hopper. Also, we judged performance of transplanter with comparing seedling missing plant ration according to two types of pick-up method. Result of experiment, in finger-type picking up of 265 seedlings, missing plant ratio was 13.7% with 17 failures of pick-up and 15 collapse of bed soil. and In fork-type picking up of 200 seedlings, failure of pick-up was not appeared and missing plant ratio was low as 4% with 6 dropped during transfer. Therefore for 2-row automatic transplanter, fork-type pick-up device was found to be compatible.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.4
• /
• pp.529-537
• /
• 2021

Membrane-type hull and cargo holds have been designed and built for large ship. However, there is a growing interest in applying the same technology to small and medium-sized Liquefied natural gas(LNG) carriers to meet the recent increase in demand for LNG as an ecofriendly fuel and for expanding LNG bunkering infrastructure. The purpose of this study is to apply the IMO Type-B tank to small and medium-sized LNG carriers and verify the safety and suitability of the design. Fatigue crack propagation analysis was performed to install a partial second drip tray installed at the lower part of the LNG cargo tank by calculating the amount of leaked gas in the support structure supporting the cargo tank. First, a program for fatigue crack propagation analysis was developed, in which Paris' law and British Standard 7910 (BS 79110) were applied based on the International Code for the Construction of Equipment and Ships Carrying Liquefied Gases in Bulk, an international standard for LNG carriers. In addition, a surface crack propagation analysis was performed. Next, a methodology for assuming the initial through-crack size was developed to determine the size of the partial second barrier. The analysis was performed for 15 days, which is a possible return time after cracks are detected. Finally, the safety and suitability of the IMO Type-B for LNG cargo tanks required by international regulations were verified. For the accurate analysis of fatigue crack propagation, it is necessary to develop and verify the analysis procedure based on direct analysis and international regulations.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.2
• /
• pp.202-210
• /
• 2022

Recently with the advance in digital dentistry, the fabrication of dentures using computer-aided design and computer-aided manufacturing (CAD-CAM) is on the rise. The denture designed through a CAD software can be produced in a 3-dimensional manufacturing process. This process includes a subtractive processing method such as milling and an additive processing method such as 3D printing and in which it can be applied efficiently in more complex structures. In this case, complete dentures were fabricated using Stereolithography (SLA)-based 3D printing to shorten the production time and interval of visits in patient with physical disabilities due to cerebral infarction. For definitive impression, the existing interim denture was digitally replicated and used as an individual tray. The definitive impression obtained with polyvinyl siloxane impression material was including information about the inclination and length of the maxillary anterior teeth, vertical dimension, and centric relation. In addition, facial scan data with interim denture was obtained so that it can be used as a reference in determination of the occlusal plane and in arrangement of artificial teeth during laboratory work. Artificial teeth were arranged through a CAD program, and a gingival festooning was performed. The definitive dentures were printed by SLA-based 3D printer using a FDA-approved liquid photocurable resin. The denture showed adequate retention, support, and stability, and results were satisfied functionally and aesthetically.

• The Journal of Advanced Prosthodontics
• /
• v.13 no.6
• /
• pp.361-372
• /
• 2021

PURPOSE. To improve the clinical effects of complete denture use and simplify its clinical application, a digital complete denture restoration workflow (Functional Suitable Digital Complete Denture System, FSD) was proposed and preliminary clinical evaluation was done. MATERIALS AND METHODS. Forty edentulous patients were enrolled, of which half were treated by a prosthodontic chief physician, and the others were treated by a postgraduate student. Based on the primary impression and jaw relation obtained at the first visit, diagnostic denture was designed and printed to create a definitive impression, jaw relation, and esthetic confirmation at the second visit. A redesigned complete denture was printed as a mold to fabricate final denture that was delivered at the third visit. To evaluate accuracy of impression made by diagnostic denture, the final denture was used as a tray to make impression, and 3D comparison was used to analyze their difference. To evaluate the clinical effect of FSD, visual analogue scores (VAS) were determined by both dentists and patients. RESULTS. Two visits were reduced before denture delivery. The RMS values of 3D comparison between the impression made via diagnostic dentures and the final dentures were 0.165 ± 0.033 mm in the upper jaw and 0.139 ± 0.031 mm in the lower jaw. VAS ratings were between 8.5 and 9.6 in the chief physician group, while 7.7 and 9.5 in the student group; there was no statistical difference between the two groups. CONCLUSION. FSD can simplify the complete denture restoration process and reduce the number of visits. The accuracy of impressions made by diagnostic dentures was acceptable in clinic. The VASs of both dentists and patients were satisfied.

• Korean Journal of Plant Resources
• /
• v.35 no.5
• /
• pp.667-674
• /
• 2022

This study was conducted to determine the three main factors [rooting time, plant growth regulators (PGRs), rooting medium] of cuttage for mass production of Sageretia thea. The experiment was observed on cuttage tray after 120 days and classified by rooting times, plant growth regulators, rooting medium. Materials were collected from natural habitats of S. thea from the Korean peninsula at March, July and September during 2019. As a result of the experiment, rooting times were showed statistically significant differences. March group's rooting rate and root length were 15 and 200% better than others. In PGRs experiment by concentration, There was no significant correlation between the control and experiment in terms of rooting rate. However, In the case of root length, IBA 500 mg/L, IBA 250 mg/L and IAA 1,000 mg/L groups were lengthened up to 170% compared to the control group, confirming statistically significant differences. As a result, we recommend treating cuttings with IBA 500 mg/L in March with Hardwood cutting.

• Journal of Food Hygiene and Safety
• /
• v.37 no.1
• /
• pp.9-14
• /
• 2022

The purpose of this study was to analyze the hazard of fungi in Garaetteok (Korean rice cake) by isolating and identifying of fungi contaminated with Garaetteok and investigating the possibility of mycotoxin production. Garaetteok used in this study were the ones that were returned back to the manufacturers in Jeollanam-do due to the presence of foreign matters presumed to be fungi. The fungi foreign matter was collected and inoculated on Potato dextrose agar, Malt extract agar, and Czapek yeast extract agar, and then cultured at 25℃ for 7 days. The micro-structure was observed under an optical microscope for the colonies in which pure isolation was confirmed. The gene sequencing of the product of amplified PCR was analyzed using the ITS primer. Colony-1 and 2 maintained the same properties in each tray, confirming that they were purely isolated. Budding cells were observed from the Colony-1, thus, it was determined to be yeast. Colony-2 was determined to be a fungus that belongs to Fusarium spp. as fusiform conidia were observed. As a result of gene sequencing, a total of 76 cases of fungi of Fusarium spp. were found, among which Fusarium solani was the most observed cases (53 cases). From the morphological and genetic identification, Colony-2 was identified as Fusarium spp., specifically, Fusarium solani. The fungi found in Fusarium spp. produce mycotoxins such as nivalenol, zearalenone, and fumonisin, which may cause vomiting, diarrhea, and cancer. Conclusively, the results confirm the possibility of mycotoxin production by Fusarium spp. isolated from Garaetteok. Consequently, when an unknown fungus was found, it is necessary to isolate and identify the fungus, determine whether it is a mycotoxin producing species, and strengthen relative administrative measures, accordingly.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.4
• /
• pp.287-293
• /
• 1991

The root-mat formation of infant rice seedlings (8- to 10-day-old) is sometime not enough for machine transplanting because of the too-short nursery period. This experiment was conducted to elucidate the effect of metalaxyl seed-soaking treatment in the mixed solution of metalaxyl, seed disinfectant and insectcides on the root-mat formation of infant rice seedling in machine transplanting. The rice seeds of Odaebyeo were soaked in the mixed solution of metalaxyl, prochloraz and insectcides. with the recommended concentrations for 24 hours at room temperature. Seeding rate was 220g per seed tray (30 x 60 x 3cm). Metalaxyl (25% wettable powder), a fungicide. was used in 1. 000 times dilution as a promoting substance on the root-mat formation. Generally, the metalaxyl-treated seeds markedly increased the root number and length, and rooting activity of infant rice seedlings as compared with the control, thus the root-mat formation was excellent. When the rice seeds were sterilized by the mixed solution of prochloraz and insectcides, metalaxyl could be used together for increasing root-mat rormation of infant rice seedlIngs due to no interaction among agro-chemicals used. Seedling damping-off and physiological seedling rot were also controled in the seedlings of metalaxy-treated seeds. The root-mat of metalxyl-treated seeds had higher hardness and tension than control in terms of physical properties.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.1
• /
• pp.57-64
• /
• 1991

This experiment was conducted to elucidate the effect of plant growth regulators (PGR) on the root -mat formation of infant seedling (8- to 10-day-old seedling) of rice in machine transplanting. The rice seeds of Odaebyeo were socked in water with different concentrations of PGRs for 48 hours at room temperature. Seeding rate was 220 g per seed tray (30x60x3cm). Metalaxyl (25% wettable powder) was used for a fungicide. Generally, the metalaxyl-treated seeds markedly promoted the root growth of the rice seedling, while tetracy-cle, pachlobutrazol and NTN -821 reduced the seedling height and root length, and thickened the shoot diameter at higher concentation levels. Tetracycle decreased root length of the rice seedlings but increased root number per seedling, and root-mat formation was poor. Whereas, metalaxyl concentrations of 200 and 1,000 ppm markedly increased root length and number of root hairs without decreasing root number, thus root-mat formation was excellent. The optimum concentration of metalaxyl seed treatment to increase the root-mat formation of infant seedling of rice was about 200 ppm. Metalaxyl seed treatment could be advanced one to two days of the duration of root-mat formation compared with control.

• Korean Journal of Poultry Science
• /
• v.50 no.1
• /
• pp.23-30
• /
• 2023

This study was conducted to analyze the correlation between egg breakage rate and cumulative external forces on eggs during the egg transfer system in 12 commercial layers farms. The commercially available electronic egg device was used to detect the external forces on eggs during egg collection systems. In addition, egg breakage rate per farm was collected. It was found that the external force on eggs were greater in the order of washer and dryer connection part, conveyor connection part, transfer, sorter, collecting elevator, packer, egg transfer connection part, and egg tray. A positive relationship between the external forces on eggs during egg transit system and the incidence of cracked eggs per farm was noted. The external forces on eggs varied from 5G to 38G depending on the location and the egg breakage rate ranged from 3.2 to 14.5% per farm. Although efforts to produce eggs with high eggshell quality are considered important, extra care should be made to lower the external forces on eggs during the egg transfer system from laying house to egg packing center.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.6
• /
• pp.545-553
• /
• 1993

The metalaxyl seed-soaking treatment markedly increased the root-mat formation of the young rice seedling(8- to l0-day-old) for machine transplanting. This experiment was conducted to find out a possible rooting mechanism of the young rice seedling in relation to the exogenous metalaxyl seed-soaking treatment. The rice seeds of Hwaseongbyeo variety were soaked in the solution of metalaxyl for 24 hours at room temperature. Metalaxyl(25% wettable powder), a fungicide, was used at the concentration of 200ppm as a promoting substance on the root-mat formation of the young rice seedling. Seeding rate of the young rice seedling was 220g per seed tray(30${\times}$60${\times}$depth 3cm). Metalaxyl seed treatment was highly effective in root initiation and elongation of the young rice seedling in terms of root activity, the number and length of root, and amino acid content of roots. The exogenous metalaxyl application would also increase the chlorophyll content and photosynthetic rate in the young rice seedling. Those factors resulted in vigorous root-mat formation of the young rice seedling. In particular, alanine is a lead compound of metalaxyl which biochemically plays an important role in energy intermediate of the rice plant. Alanine conjugation with a glucose (N-${\beta}$-glucoside) is probably the mechanism in enhancement of initiation and elongation of rice roots of young rice seedling.