• 한국수산과학회지
• /
• 제30권5호
• /
• pp.691-699
• /
• 1997

본 연구에서는 트롤그물의 유수저항 특성 및 그 저항을 그물의 구조, 규격 등으로 정도 높게 표현해내는 방법을 얻어내는 것을 목약으로 하여, 벽 면적이 $S(m^2)$되는 트롤그물이 유속 $\nu\;(m/sec)$에서 받는 유수저항 R(kg)을 $R=kSv^2$으로 표시하고, 지금까지 행해진 저항실험 결과들을 수집하여 윗 식의 형태로 정리하였으며, 저항계수 $k(kg{\cdot}sec^2/m^4)$를 전보 에서 구한 저항식에 의해 해석하였다. 그 결과, k는 그물 입구의 단면 을 $S_m\;(m^2)$, 흐름에 수직인 평면에 대한 그물의 총 투영면적을 $S_n\;(m^2)$, 그물감의 대표치수를 $\lambda$($={\pi}d^2/2lsin2\varphi;\;d$ : 그물실의 지름, 2l : 그물코의 크기, $2\varphi$ 그물코의 전개각)라 할때, 저층 트롤과 중층 트롤에서 각각 $$k=4.5(\frac{S_n}{S_m})^{1.2}v^{-0.2}$$ in case of bottom trawl nets and as $$k=5.1\lambda^{-0.1}(\frac{S_n}{S_m})^{1.2}v^{-0.2}$$ 및 $$k=5.1\lambda^{-0.1}(\frac{S_n}{S_m})^{1.2}v^{-0.2}$$ 으로 표시할 수 있었고, 이들에서 $S_n/S_m$의 값은 각각의 그물과 벽 면적이 같은 원추형 자루그물로부터 구해도 된다는 것을 알 수 있었으며, 설계 방식이 일반화 되어 있는 그물들의 경우는 유수저항 R(kg)을 저층 트롤과 중층 트롤에서 각각 $$R=1.5\;S\;v^{1.8}$$ 및 $$R=0.7\;S\;v^{1.8}$$으로 표시해도 좋다는 것을 알 수 있었다.

• Fisheries and Aquatic Sciences
• /
• 제16권2호
• /
• pp.101-108
• /
• 2013

An active stimulating device (ASD) consisting of a net panel or ropes fluttering in the turbulence inside the cod end was effective in driving fish near the cod end to reduce juvenile by-catch. The fluttering characteristics of the rope and net panel were examined by video observations and analyzed for fluttering amplitude and period in a water channel and in field experiments with a bottom trawl. The amplitude ratio of the fluttering ropes or nets in the tank test increased with the fluttering index as the diameter of the twine, mesh size, flexibility, and flow velocity changed, whereas the period decreased with the above factors. In bottom trawl experiments, the range of mean depth difference in the fluttering net panel was 12-17% of the length of the fluttering net, and the period of depth difference or three-dimensional (3D) tilt was revealed, with shorter ones ranging from 2 to 6 s. The amplitude as depth difference and period from field measurements were similar to those of nets in tank experiments and also to the period of 3D flow velocity inside the cod end. These results could be used to design an ASD that could be used for to the cod end of actual towed fishing gear to reduce juvenile by-catch.

• 수산해양기술연구
• /
• 제35권3호
• /
• pp.250-265
• /
• 1999

Quality and distribution of the TEA(Total Enclosed Area), TSA(Twine Surface Area), solidity ratio and resistance according to the partial nets of the midwater trawl net were examined through experiment at the sea to standardize a design of the midwater trawl net.The results can be summarized as follows;1. The TEA, TSA and resistance of the trawl net were increased definitely according to increasing the scale of the trawl net, and this is the most important factor to design the trawl net.2. As the result of analysis of the distributions of the bag net was smaller than the others. Because TEA for rear end of the wing net is decreased suddenly, we can judge that the trawl net was towed irregularly. 3. The resistance distribution of the partial net was increased suddenly from central part of the bag net and was showed large value in the codend.4. The resistance of the net from the position one of three to gab net and codened charged 75% at all resistance of net.

• 수산해양기술연구
• /
• 제51권2호
• /
• pp.203-211
• /
• 2015

The purpose of this study is to identify the flow resistance of the bottom pair trawl nets. The bottom pair trawl nets being used in fishing vessel (100G/T, 550ps) was selected as a full-scale net, and 1/10, 1/25 and 1/50 of the model nets were made. Converted into the full-scale net by Tauti's modeling rule and Kim's modeling rule, when resistance coefficient k of each net was calculated by substituting into above equation for flow resistance R and wall area of nets S values of each net ${\upsilon}$. Because resistant coefficient k decreases exponentially according as flow velocity ${\upsilon}$ increases to make $k=c{\upsilon}^{-m}$, c and m values of each net were compared. As a result, as the model was smaller, c and m values was smaller in the two rule into standard of 1/10 model value, decrease degree of 1/25 model was almost same in the two rule, decrease degree of 1/50 model was very big in Tauti's modeling rule. Therefore, in the result of experiment, because average of c and m values for similarly 1/10 and 1/25 model were given $c=4.9(kgf{\cdot}s^2/m^4)$ and m=0.45, R (kgf) of bottom pair trawl net could show $R=4.9S{\upsilon}^{1.55}$ using these values. As in the order of cod-end, wing and bag part for 1/25 and 1/50 model net were removed in turn, measured flow resistance of each, converted into the full-scale, total resistance of the net and the resistance of each part net were calculated. The resistance ratio of each part for total net was not same in 1/25 and 1/50 model each other, but average of two nets was perfectly same area ratio of each part as the wing, bag and cod-end part was 43%, 45% and 12%. However, the resistance of each part divided area of the part, calculated the resistance of per unit area, wing and bag part were not big difference each other, while the resistance of cod-end part was very large.

• 한국수산과학회지
• /
• 제30권5호
• /
• pp.700-707
• /
• 1997

본 연구에서는 유수저항과 해저 마찰력을 동시에 받는 저층 트롤그물의 예망저항을 정도 높게 표현해낼 목적으로, 전보에서 구한 유수저항만을 받을 때의 저항식에 해저 마찰력의 영향을 추가하고, 지금까지 행해진 실험 결과들을 수집하여 분석하였다. 그 결과, 벽 면적이 $S(m^2)$ 되는 저층 트롤그물이 예망속도 $\nu(m/sec)$에서 받는 예망저항 R(kg)은 그물 입구의 단면적을 $S_m\;(m^2)$, 흐름에 수직인 평면에 대한 그물의 총 투영면적을 $S_n\;(m^2)$, 자루그물 앞끝의 완성 둘레를 B(m)라 할 때 $$R=4.5(\frac{S_n}{S_m})^{1.2}S\;v^{-1.8}+20(Bv)^{1.1}$$으로 주어졌다. 그러나, 실용적으로는 윗 식보다 $R=kS\nu^2$의 형태로 표시하는 것이 더욱 편리하다고 볼 수 있기 때문에, 실험 결과들을 이 식에 적용하여 저항계수 $k(kg{\cdot}sec^2/m^4)$를 여러 가지 측면에서 검토해 본 결과, k는 근사적으로딜만의 함수로 표시할 수 있다는 것을 알 수 있었으며, 그물의 완성 전장을 L (m)이라 할 때 $S{\propto}BL$이어서 $S/BL=\alpha$라 둘 수 있기 때문에 R(kg)은 근사적으로 $$R=18{\alpha}B^{0.5}L\;v^{1.5}$$으로 표시해도 좋다는 것을 알 수 있었다. 또한, $\alpha$의 값은 그물마다 달라 $0.40\~0.55$의 범위이긴 하나 전체 평균치 0.48에서 크게 벗어나지 않았기 때문에, 저층 트롤그물들을 총괄해서 표시할 때는 $\alpha=0.48$을 적용함으로써 R (kg)을 $$R=9\;B^{0.5}\;L\;v^{1.5}$$ 으로 대신해도 좋다는 것을 알 수 있었다.

• 수산해양교육연구
• /
• 제6권1호
• /
• pp.11-19
• /
• 1994

The North Pacific midwater trawling which is one of the important fishing methods for Korean fishing industry is working in the Bering Sea and the sea near Kamchaka Peninsula. The catch by Korean midwater trawlers had been recorded about 300 thousands $^{M/_T}$ a year. Six types of midwater trawl net-ordinary midwater trawl net, super-V trawl net, super mesh trawl net, rope trawl net, super plus trawl net and kite trawl net-have been widely used by large trawlers above 1,500gt in size since 1982. Regarding the fishing efficiency, the super plus trawl net and kite trawl net were acknowledged as higher than other nets. Maximum mesh size of super-plus trawl net and kite trawl net ranges about 20m, whereas the length of net about 150m, and high-tech polyethylene is used as the material of rope part. The problems involved in the North Pacific midwater trawl net may be summarized as follows ; (1) The dimension of fishing gear is too big compared with the towing power of trawler. (2) The mesh size of the rope part is too big compared with that of the common netting part. (3) The net is often torn out in the connecting position of the rope part and the netting part. (4) The net is not matched with the trawler and the otter board in many trawlers, so the shape of the trawl gear in the water is instable. (5) The fish school located near head rope, ground rope and side rope in the net recorder is not caught in practice because of the net instability.

• 수산해양기술연구
• /
• 제47권4호
• /
• pp.281-289
• /
• 2011

The purpose of this study is to identify the flow resistance of the bottom trawl net. The bottom trawl net being used in the training ship of Chonnam National University was selected as a full-scale net, and model nets such as 1/10, 1/25 and 1/50 of the actual net were made. Total resistance of the net part, the height of the net mouth and the flow resistance of components of the net such as wing, bag and cod-end part was measured, converted into full-scale and compared. Additionally, the model rule of Tauti (1934), which has been most frequently used in fishing net modeling experiments, was applied to interpret flow resistance and scale effect of model experiment was investigated. Presumed that the flow resistance R is $R=kS{\upsilon}^2$ against the flow velocity of each net ${\upsilon}$, resistance coefficient k was calculated by substituting R, ${\upsilon}$ and S of the net. From the result, it was found that k decreases exponentially when u increases which makes $k=c{\upsilon}^{-m}$. Whereas m of each net is ranged between 0.13-0.16 and there was not significant difference between nets. c does not show big difference in 1/10 and 1/25 model and the value itself was relatively bigger than in 1/50 model. The height of the net mouth of 1/25 and 1/50 model net h decreases exponentially according as ${\upsilon}$ increases to make $h=d{\upsilon}^{-n}$. Whereas d and n values were almost same in two nets. Additionally, when resistance of cod-end, wing and bag part in 1/25 and 1/50 model nets, both nets showed big resistance in bag part when flow is 1m/s as more than 60%. Wing and cod-end part showed almost same value or wing part had little bit larger value. On the other hand, when reviewing the reasons why both models showed difference in 1/50 model while c value against the resistance coefficient k did not show big difference in 1/10 and 1/25 model, it is inferred that the difference occurred not from material difference but from the difference in net size according to scale. It was judged that they are the scale effects concomitant to the model experiments.

• 수산해양기술연구
• /
• 제50권3호
• /
• pp.351-360
• /
• 2014

The experiments were carried out to decide the selective fishing gear of the shrimp beam trawl fishery. The model nets were made of General type, Double-level type and Grid type. The model experiments were carried out to test opening efficiency and towing tension. The experimental tanks were the flume tank [$8.0L{\times}2.8W{\times}1.4H(m)$] and the towing tank [$85L{\times}10W{\times}3.5H(m)$] in National Fisheries Research and Development Institute. The full scale experiments were carried out to compare the selectivity of General type net, Double-level type net and Grid type net in the southern sea of korea. The vertical opening (net height) of the model nets can be expressed as a function of the towing velocity as the straight line. The towing tension of the model nets can be expressed as a function of the towing velocity as the parabola. The shrimp catching rates of upper cod end in Boryeong and tongyeong were 78%, 9% respectively, but the rates of lower cod end were 23%, 91% respectively. The number bycatch rates of General type and Grid type were 23%, 11% respectively, and the weight bycatch rates were 34%, 31% respectively. A selective shrimp beam trawl net is Grid type in korea coastal sea.

• Fisheries and Aquatic Sciences
• /
• 제17권1호
• /
• pp.145-153
• /
• 2014

The motion of the otter board on a trawl can affect the motion of trawl nets, and the motion of the codend can affect fish selectivity. Preliminary measurements of the tilt of bottom trawl gear were carried out to compare the tilts of the otter board and codend. The tilt of the otter board was measured by Vector and tilt at 1.5 m anterior to the end of the codend, and the middle upper panel was measured with a micro-DST-tilt logger. Tilt data such as yaw, pitch, and roll were analyzed by the fast Fourier transformation method and global wavelet and event analyses for the period or amplitude. The mean period ${\pm}$ standard deviation of the tilt in the otter board, $(5-6){\pm}2s$, was similar to the period of the codend, $(4-6){\pm}(2-3)s$, whereas the amplitude of the codend was greater than that of the otter board. The yaw and pitch periods were not significantly different between the otter board and codend, but roll was different. Furthermore, the tilt period frequencies of the otter board and codend were not significantly different. Accordingly, the tilt motion of the codend was mostly related to the tilt of the otter board.

• 수산해양기술연구
• /
• 제46권4호
• /
• pp.302-312
• /
• 2010

In order to describe the performance of a wedge type jellyfish excluder device, a series of fishing experiments was carried out in the coastal areas of Yokji Island, southern Korea in 2009, using a trawl net with a cover net. The body size and weight of each individual (fish or jellyfish) caught in the experimental fishing were measured. In the case of giant jellyfish the bell diameter and weight were measured. The catch species was composed of giant jellyfish (Nemopilema nomurai), silver croaker (Pennahia argentata), yellow croaker (Larimichthys polyactics), finespotted flounder (Pleuronichthys cornutus), largehead hairtail (Trichiuruslepturus), melon seed (Psenopsisanomala) and so on. The weight ratio and individual ratio of total fish escaped through the outlet of the excluder device were 0.322 and 0.320, respectively. The weight ratios of giant jellyfish excluded from the trawl net ranged from 0.740 to 0.921 (average 0.852/haul). It means that the wedge type jellyfish excluder device performed well and allowed the most of the giant jellyfish to exclude through the trawl net. The approximately 70% of fish entered in trawl net was caught. The wedge type excluder device needs some improvements to minimize the fish escape from the trawl nets in the future.