• 한국컴퓨터정보학회논문지
• /
• 제26권12호
• /
• pp.133-142
• /
• 2021

이동 패턴 인식은 사용자 궤적 질의, 사용자 행동 예측, 사용자 위치에 기초한 흥미요소 추천, 사용자 개인 정보 보호 및 지자체 교통 계획과 같은 여러 측면에서 널리 사용된다. 현재 인식 정확도는 응용 요건을 충족할 수 없기 때문에 이동 패턴 인식 연구는 궤적 데이터 연구의 초점이라 할 수 있다. GPS 내비게이션 기술과 지능형 모바일 기기의 대중화로 많은 사용자 모바일 데이터 정보를 얻을 수 있고, 이를 바탕으로 많은 의미 있는 연구가 이루어질 수 있다. 현재의 이동 패턴 연구 방법에서 궤적의 특징 추출은 궤도의 기본 속성(속도, 각도, 가속도 등)으로 제한된다. 본 논문에서 순열 엔트로피는 궤적 분류 연구에 참여하기 위한 궤적의 고유값으로 사용되었으며 시계열의 복잡성을 측정하기 위한 속성으로도 사용되었다. 속도 순열 엔트로피와 각도 순열 엔트로피가 이동 패턴 분류에 참여하기 위한 궤적의 특성으로 사용되었으며, 본 논문에서 사용된 순열 엔트로피를 기반으로 한 속성 분류의 정확도는 81.47%에 달했다.

• 한국도로학회논문집
• /
• 제15권1호
• /
• pp.111-119
• /
• 2013

PURPOSES: Though the situation that the roundabouts are actively constructed, researches on the effect of the roundabouts focus mainly on the analysis of the expected effects of using only traffic simulation on the operation. Considering such problems, this study is conducted to analyze the effects of the various aspects based on field observation studies. METHODS: This study evaluated and analyzed the effects from the aspects of traffic operation, traffic safety, and traffic behavior by performing field observation studies with six roundabouts with/without signal controls on the pilot project areas for the roundabouts installed in 2010. RESULTS: Through the study results, it was found that the average travel time decreases by 14.7% and 2.4% on the signalized intersections and unsignalized intersections, respectively. The average travel speed increases by 9.7 and 5.8km/h on the roundabouts with/without signal lights. Regarding traffic safety, the speed deviation among individual vehicles decreases by approximately 18.4 to 32.7km/h, thus confirming the safety effects. As the decrease of the number of conflicts, it might be explained that car crashes and collision with pedestrians decreased by 62.2% and 66.7%. Also the result shows that the lowest point of speed in roundabouts appears near the yield line on the entry area on the roundabouts. When passing through the roundabouts, vehicles enter at a speed of 20-30km/h, which is the design speed of the circulatory lane and drive out the roundabout with a higher speed than the entry speed. CONCLUSIONS: When a roundabout is introduced at the intersections below certain traffic volume there are effects of traffic operation, traffic safety, and traffic behavior.

• 한국심리학회지 : 문화 및 사회문제
• /
• 제12권1호
• /
• pp.35-54
• /
• 2006

본 연구는 교통사고다발집단인 청소년 운전자들의 운전속도에 음악의 빠르기가 어떤 영향을 미치는지 알아보기 위한 목적으로 실시하였다. 만 26세 이하의 운전면허를 소지한 남자 대학생 운전자 23명을 각기 다른 음악 조건에 무선 할당한 후, 시뮬레이터를 운전하도록 하였다. 실험조건은 음악 없는 조건, 느린 음악 조건 그리고 빠른 음악 조건으로 나누어서 피험자들의 주행속도를 비교분석하였다. 주요 결과를 요약하면 음악 빠르기 조건에 따라 전체 주행 소요시간은 집단간 유의한 차이를 보였다. 그리고 고속구간에서도 음악 빠르기 조건별 평균속도에서 유의한 집단간 차이가 확인되었다. 청소년 운전자들의 운전속도가 음악의 빠르기와 관련되어 있다는 것은 음악 빠르기가 운전자의 생리적인 측면에 관여하는 것으로 생각한다. 빠른 음악을 들으면 심박수가 증가하고, 신체운동 강도가 높아지는 것과 마찬가지로, 운전상황에서 빠른 음악이 운전자의 신체운동 대신 운전행동에 영향을 미쳐 과속행동을 유발하는 것으로 해석된다.

• 대한교통학회지
• /
• 제8권1호
• /
• pp.55-71
• /
• 1990

The behavioral mechanism underlying the traffic assignment model is a choice, or decision-making process of traveling paths between origins and destinations. The deterministic approach to traffic assignment assumes that travelers choose shortest path from their origin-destination pair. Although this assumption seems reasonable, it presumes that all travelers have perfect information regarding travel time, that they make consistently correct decision, and that they all behave in identical fashion. Stochastic user equilibrium assignment relaxes these presumptions by including a random component in traveler's perception of travel time. The objective of this study is to compare "A Model of Deterministic User Equilibrium Assignment" with "Models of Stochastic User Equilibrium Assignment" in the theoretical and practical aspects. Specifically, SUE models are developed to logit and probit based models according to discrete choice functions. The models were applied to sioux Falls net ork consisting of 24 zones, 24 nodes and 76 links. The distribution of perceived travel time was obtained by using the relationship between speed and traffic flow.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 추계학술대회
• /
• pp.214-215
• /
• 2013

교통망의 서비스 수준을 객관적으로 측정하는 주요한 기준은 통행시간과 지체시간이다. 본 논문에서는 주행차량 조사법을 이용하여 서비스 수준을 측정하도록 한다. 이를 통하여 시간당 교통량, 평균 통행 시간, 공간 평균 속도를 구할 수 있다. 또한 교통량의 밀도도 얻을 수 있다.

• 대한산업공학회지
• /
• 제22권3호
• /
• pp.517-532
• /
• 1996

The area and time-dependent vehicle scheduling problem(ATVSP) is a generalization of the vehicle scheduling problem in which the travel speed between two locations depends on the passing areas and time of day. We propose a simple model for estimating area and time-dependent travel speeds in the ATVSP that relieves much burden for the data collection and storage problems. A mixed integer nonlinear programming formulation of the ATVSP is presented. We also propose three heuristics for the ATVSP, developed by extending and modifying existing heuristics for conventional vehicle scheduling problems. The results of computational experiments demonstrate that the proposed estimation model performs well and the saving method is the best among the three heuristics.

• 산업공학
• /
• 제22권4호
• /
• pp.359-367
• /
• 2009

The vehicle travel time between the demand points in downtown area is greatly influenced by complex road condition and traffic situation that change real time to various external environments. Most of research in the vehicle routing problems compose vehicle routes only considering travel distance and average vehicle speed between the demand points, however did not consider dynamic external environments such as traffic situation by service time zones. A realistic vehicle routing problem which considers traffic situation of smooth, delaying, and stagnating by three service time zones such as going to work, afternoon, and going home was suggested in this study. A mathematical programming model was suggested and it gives an optimal solution when using ILOG CPLEX. A hybrid genetic algorithm was also suggested to chooses a vehicle route considering traffic situation to minimize the total travel time. By comparing the result considering the traffic situation, the suggested algorithm gives better solution than existing algorithms.

• 한국산업융합학회 논문집
• /
• 제5권2호
• /
• pp.111-118
• /
• 2002

In GMAW(Gas Metal Arc Welding) processes, bead geometry (penetration, bead width and height) is a criterion to estimate welding quality, Bead geometry is affected by welding current, arc voltage and travel speed, shielding gas, CTWD (contact-tip to workpiece distance) and so on. In this paper, welding process variables were selected as welding current, arc voltage and travel speed. And bead geometry was reasoned from the chosen welding process variables using neuro-fuzzy algorithm. Neural networks was applied to design FLC(fuzzy logic control), The parameters of input membership functions and those of consequence functions in FLC were tuned through the method of learning by backpropagation algorithm, Bead geometry could he reasoned from welding current, arc voltage, travel speed on FLC using the results learned by neural networks. On the developed inference system of bead geometry using neuo-fuzzy algorithm, the inference error percent of bead width was within ${\pm}4%$, that of bead height was within ${\pm}3%$, and that of penetration was within ${\pm}8%$, Neural networks came into effect to find the parameters of input membership functions and those of consequence in FLC. Therefore the inference system of welding quality expects to be developed through proposed algorithm.

• 한국경제지리학회지
• /
• 제21권2호
• /
• pp.107-118
• /
• 2018

급속한 경제발전에 따라 중국 베이징에서 교통혼잡이 심각한 문제로 대두되고 있다. 혼잡통행료는 도로의 정체를 해결해주는 매우 효율적인 방법인데, 이의 시행에 있어 가장 중요한 과제는 혼잡통행료의 산출모형을 개발하는 것이다. 기존연구와 달리 본 논문은 이론적 논의에 그치지 않고 세 가지의 현실적 문제, 즉, 통행속도와 밀도의 관계, 통행의 시간비용, 최적통행량 산정방법의 도출에 집중하였다. 먼저 회귀분석을 통하여 통행속도와 밀도의 관계를 파악하고, 이어 설문조사 결과를 이용하여 통행의 시간비용을 추정하였다. 또한 수요곡선에 대한 정확한 정보가 없더라도 시행착오를 거쳐서 최적통행량을 산정할 수 있음을 보였다. 마지막으로 베이징 제2순환도로의 혼잡통행료 책정시스템을 설계하고 요금의 적절한 징수방안을 제안하였다.

• 농업과학연구
• /
• 제44권1호
• /
• pp.114-122
• /
• 2017

An experimental pick-up type pulse crop harvester was built and its harvesting performance for green kernel black bean was evaluated. Field bean loss and harvested bean quality of the harvester were analyzed according to engine speeds of 2,000; 2,400; 2,800; 3,000; and 3,200 rpm, and travel speeds of 0.6; 1.0; and 1.4 m/s. Operating conditions and field capacity of the harvester for proper harvesting were estimated. The harvester had an optimum performance at a grain moisture content of 13.4%, an engine speed of 3,000 rpm, and a travel speed of 1.2 - 1.3 m/s. Subsequently, the picking-up, discharging, and total bean loss ratios were found to be 1.6, 1.3, and 2.9%, respectively. The whole bean, damaged bean, unthreshed bean, and foreign material ratios were determined to be 96.2, 1.0, 0.1, and 0.3%, respectively. Results showed that the harvester had lower bean loss and higher harvested bean quality than those of imported bean combines. The harvester could harvest 2 rows with a crop spacing of an approximately 1.4 m. Its optimum travel speed was estimated to be approximately 1.2 m/s when harvesting performance was taken into account using such variables as field bean loss and harvested bean quality for green kernel black bean. Effective field capacity of the harvester was estimated at approximately 40 a/h.