• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.4
• /
• pp.247-254
• /
• 2004

The mesh selectivity of the drum net fish trap for elkhorn sculpin(Alcichthys alcicornis) in the estern sea of Korea was described. The selection curve for the elkhorn sculpin caught from the experiments between June 2003 and December 2003 was by SELECT(Share Each Length Class's Catch Total)model and by Kitahaa's method to a polynomial equation and two parameter logistic selection curve. The selection curve by SELECT model showed to be equal probability of entrance of the elkhorn sculpin in the large(55mm) and small(20mm) mesh traps by minimum AIC (Akaike Information Criteria). The equation of selectivity curve obtained by Kitahara's method using a logistic function with least square method was $s(R)\;=\;\frac{1}{1+exp(-0.3545R+2.141)$, where R=1/m, and/and m are total length and mesh size, respectively. The mesh selectivity curve showed that the current regulated mesh size(35mm) for the trap was corresponded to 21.4cm in the $L_{50}$of the selection curve for the elkhorn sculpin.

• Ocean and Polar Research
• /
• v.24 no.2
• /
• pp.123-134
• /
• 2002

Seasonal variations of settling particles and metal fluxes were monitored at a nearshore site of Marian Cove, King Geroge Island, Antarctica from 28th February 1998 to 22nd January 2000. Near-bottom sediment traps were deployed at 30m water depth of the cove, and sampling bottles were recovered every month by SCUBA divers. Total particulate flux and metal concentrations were determined from the samples. Total particulate flux showed a distinct seasonality, high in austral summer and low in austral winter: the highest flux $(21.97g\;m^{-2}d^{-1})$ was found in February of 1999, and the lowest $(2.47g\;m^{-2}d^{-1})$ in September of 1998, when sea surface was frozen completely. Lithogenic particle flux accounted for 90% of the total flux, and showed a significantly negative correlation with the thickness of snow accumulation around the study site. It was suggested that the most of the lithogenic particles trapped in the bottles was transported by melt water stream from the surrounding land. Fluxes of Al, Fe, Ti, Mn, Zn, Cii, Co, Ni, Cr, Cd, and Pb showed similar seasonal variations with the total flux, and their averaged fluxes were 34000, 9000,960, 180, 13.8, 17.6, 3.0,2.1, 5.4, 0.02, and $1.5nmol\;m^{-2}d^{-1}$ respectively. Among the metals, Cu and Cd showed the most noticeable seasonal patterns. The Cd flux correlated positively with the fluxes of biogenic components while the Cu flux correlated with both the lithogenic and biogenic particle fluxes. The Cu flux peak in the late summer is likely related to a substantial amount of inflow of ice melt water laden with Cu-enriched lithogenic particles. On the other hands, the Cd flux peak in the early spring may be associated with the unusually early occurred phytoplankton bloom.

• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.5
• /
• pp.547-556
• /
• 2007

The release, sampling and analytical methods have been developed and tested for perfluorocarbons (PFCs) atmospheric tracers in order to gain insight into the atmospheric transport and dispersion over the urban conditions of Seoul, Korea. Although PFCs tracer experiments provide unique opportunities to test local and urban scale of transport and dispersion, no previous experiment with PFCs has been conducted in Korea. PMCH and PDCH were chosen as targeted tracers in our study due to their extreme low ambient concentrations and great sensitivities among various PFCs. For PFCs release system, a set of micro-metering pump, electronic balance, vaporizing furnace and high speed blower was constructed for precise and accurate release of tracers. The precision of released rate by this system was estimated to be 1%. Samplings of PFCs were carried out by fabricated portable air samplers with micro pumps and rotameters into glass tubes packed with 150 mg of Carboxen-569. The uncertainty of these sampling system was maintained below 14%. PMCH and PDCH were quantified in GC/ECD with preconditioned injection system to eliminate the interference compounds using traps and subsequent catalytic conversion system prior to column separation. Three intensive field test were undertaken during the springtime of 2002 to 2004 in eastern part of Seoul. Daily background samples were collected to characterize the background levels of PMCH and PDCH prior to their release. The observed background concentrations of PMCH ranged from 3.5 to 10.1 fL/L and varied randomly in location and time in this study. Its mean and standard variation of background concentration ($6.8{\pm}1.9\;fL/L$) are higher than those ($3.2{\sim}5.8\;fL/L$) of other historic tracer studies. Identified uncertainty for background PMCH was $1.7{\sim}2.0\;fL/L$ using this analytical system. Combined relative uncertainty in determining the tracer's concentrations was estimated as 17%. However, its background concentrations and uncertainty in concentration determination were found to be low and stable enough for tracer study.

• Korean Chemical Engineering Research
• /
• v.49 no.1
• /
• pp.47-55
• /
• 2011

The optimum mold design and the optimum process condition were constructed upon executing process simulation of rubber injection molding with the commercial CAE program of MOLDFLOW (Ver. 5.2) in order to solve the process-problems of K company relating to cracks, which occurs at the inner cavity wall of C. V. joint boots. As a result it was confirmed that the real cracks occurs at the exactly same position of the cavity as exhibits the defects of weld and meld line and unsatisfactory curing according to the result of simulation. In order to prevent the occurrence of weld and meld line at the defect-position, the location of gate was altered to the optimum position of the cavity. Consequently the filling pattern was established to minimize the degree of the melt-fronts confronting or the melt-flows melding to prevent the occurrence of weld and meld line at the defect-position. It was observed that both gate-positions to maximize the degree of the formation of weld and meld line and air traps are located, respectively, in opposite direction each other with reference to the optimum gate position. In addition, the temperature of mold was raised by $10^{\circ}C$ and maintained at $170^{\circ}C$ for satisfactory curing.

• Journal of Environmental Impact Assessment
• /
• v.29 no.3
• /
• pp.182-197
• /
• 2020

This study investigated the home range and characteristics of activities to contribute to the improvement of management techniques and the successful promotion of management policies of invasive nutria, which is a representative invasive species of South Korea. Six individuals were captivated for the study. Remote radio tracking on three of them was carried out followed by the analysis of the results. The average home range of the follow-up individuals were confirmed to be 0.043 ㎢ at MCP 95%, 0.085 ㎢ at K 95%. It was 0.018 ㎢ at K 50%, which is the core space. In 95% MCP, males exhibited the home range with 0.058 ㎢, showed wider home range 0.046 ㎢ than females who showed 0.012 ㎢, and showed a wider home range 0.015 ㎢ more at night than during the day. As a result of comparing the results of this study with the case studies of overseas studies, it is determined that the magnitude of the derived home range is the result of a stable habitat in which the procurement of food resources is smooth and human interference is limited. The daily moved distance of males was larger than that of females, with a maximum moved distance of 1,278 m per day. Activity at the study site is high from around sunset to around 6 A.M., 10 P.M., 7 P.M., 1 A.M., and 5 A.M., and high around sunrise and low during the daytime such as 2 P.M., which reflected the propensity of nocturnal animals to act. The results of this study on the home range and activity in nutria can be used as useful data forimproving the management of invasive alien species for the installation and operation of traps, the spatial setting of controlled areas, and the calculation of the amount ofresources together with a basic understanding of nutria's behaviors in South Korea.

• Korean Journal of Veterinary Service
• /
• v.26 no.3
• /
• pp.203-214
• /
• 2003

Scrub typhus and murine typhus are common endemic febrile illness in the fall in Korea. Scrub typhus is caused by Orientia tsutsugomushi, murine typhus is caused by Rickettsia typhi. Trombiculid mites are known as both the vector and the reservoir host of O tsutsugamushi, the mites which transmit O tsutsugomushi have been reported to be Leptotrombidium pallidum and L scutellare. The author carried out an epidemiological study of scrub typhus and murine typhus in Kyodong-Myeon, Kanghwa-Gun, Incheon in relation to the residents and the host rodents, such as their distribution, seroepidemiology, and population density of chigger mites. 1. Out of 900 residents, 33(3.7%) showed positive reaction to O tsutsugamushi, 24(2.7%) to R typhi. 2. In the seropositives to O tsutsugamushi or R typhi, between the sixties and the seventies of the age were dominant. 3. In the seropositives to O tsutsugamushi serotypically Gilliam was dominant. 4. Among the total 42 field rodents trapped by the sherman traps, 18 rodents were Apodemus agrarius(42.9%), 13 rodents were Crocidura lasiura(31.0%), 5 rodents were Musmusculus(11.9%), 2 rodents(4.8%) were Crocidura suaveolens, Rattus norvegicus, Tscherskia triton, respectively. 5. Out of 42 field rodents, 25 were parasitized by 4,419 chigger mites, showing 59.5% of the infestation rate and 98.8 of the chigger index. L pallidum parasitized in A agrarius, C lasiura, M musculus, R norvegicus and T triton, and L scutellare parasitized only C lasiura. 6. Antibodies in the sera of field rodents against O tsutsugamushi and R typhi were investigated by indirect immunofluorescent antibody technique. Positive rate of antibody against O tsutsugamushi were 11.9(5 of 42) and all of the positive is A agrarius. Antibody against R typhi was not detected. These results might provide the basic information for the management of scrub typhus and murine typhus in Kyodong-myeon, where the epidemiological studies on scrub typhus and murine typhus was not carried out enough.

• Journal of Life Science
• /
• v.25 no.12
• /
• pp.1445-1449
• /
• 2015

The pinewood nematode Bursaphelenchus xylophilus (Nematoda: Parasitaphelenchidae) poses a serious threat to pine forests in Europe and East Asia, leading to a debilitating pine wilt disease. Infected pine trees in Korea are generally fumigated or crushed to small wood chips after felling. Although pine wilt disease often recurs in pest management sites, there are no adequate means to monitor the effectiveness of pest control measures in those sites. Recently, a male-produced aggregation pheromone, 2-(undecyloxy)ethanol, was shown to be useful for attracting several Monochamus species, which are vectors for the pinewood nematodes. In this study, we investigated the abilities of 2-(undecyloxy)ethanol at three different doses (175, 350, and 700 mg), as well as host plant volatiles (α-pinene and ethanol), to attract M. alternatus (Coleoptera: Cerambycidae) at a pine forest in Pohang, Korea where infected pine trees had been cut down and fumigated. Twenty-seven M. alternatus were captured in cross-vane panel traps made of polyethylene terephthalate bottles and acrylic sheets. The results indicate that a high dose of 2-(undecyloxy)ethanol (700 mg per trap) is the most effective for attracting M. alternatus. The aggregation pheromone could be used to monitor the effectiveness of pest control measures as well as M. alternatus populations.

• Korean Journal of Ecology and Environment
• /
• v.33 no.3 s.91
• /
• pp.267-273
• /
• 2000

Temperature-associated emergence patterns for a hydropsychid caddisfly, Hydropsyche kozhantschikovi, were studied from the Wangsuk creek in Kyonggi-do from April to June in 1999. Emerging adults were quantitatively collected by pyramidshaped emergence traps. Water temperature was hourly monitored in 1999. The emergence began at April 15 when the daily mean water temperature rose to ca. $10^{\circ}C$: it rapidly increased and peaked in ca. 10 days, and continued to May 25, lasting 40 days since the starting date. The average number of emerged adults was $35.8\;inds./m^2$ and their sex ratio was male (M) : female (F) = 1 : 2.04. The emergence of males was ca. 2 days earlier than that of females. Daily, the emergence was a bigeminans pattern representing the major peak (66.7%) just after dark ($19:00{\sim}21:00$) and theminor peak (11.1%) just before dawn ($05:00{\sim}07:00$). According to our degree dayaccumulation (DD) model, it respectively required 453.89DD (M: 440.48DD and F: 473.97 DD), 615.71DD (M: 610.18DD and F: 622.09DD), and 820.24DD (M: 828.25DD and F: 804.71DD) to begin, to reach the peak, and to finish the emergence.

• Parasites, Hosts and Diseases
• /
• v.35 no.3
• /
• pp.165-170
• /
• 1997

The present study was performed to analyze the infection status of trematode metacercariae in fishes caught from Chunamchosuchi (pond) located in Uichang-gun. Kyongsangnam-do. A total of 130 freshwater fish of 5 species was collected by a fish net and fish traps from November, 1995 to May, 1996. They were examined under a stereomicroscope after artificial digestion with pepsin-HCI solution. A total of 8 species or metacercaria, i. e. Clonorchis sinensis, Echinochnsnw japonicas, Cvathocotwle orientalis, Diplostomun sp.. Metorchis orientalis. Holostephcnw nipponicw, Exorchis oviformis and unidentified echinostome, was detected from them. The metacercariae of C. sinenesis were found in 8/20 (40.0%) Accnthorhodeus Qsmwsi, 20/20 (100%) Cutter breuiccudc, 31/45 (68.9) Cultriculus eigenmanni and 21/25 (84.0%) Pseunorasborc pronga, and the average number of metacercariae detected in each fish species were 1.9, 31.7. I5.3, and 73.0. From the above results, it was confirmed that fresh-water fishes from Chunamchosuchi (pond) were highly infected with metacercariae of avian trematode, i.e. C. orientolis, H. nipponicus. M. oui,entnlis, E. jcponicw and Diplostonum sp., and 4 species of fish. P. parvc, C. breuiccudn, C. eigenmnnni and A. asmussi, were infected with metacaecariae of C. sinensis.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.120-120
• /
• 2011

Graphene is a carbon based material and it has great potential of being utilized in various fields such as electronics, optics, and mechanics. In order to develop graphene-based logic systems, graphene field-effect transistor (GFET) has been extensively explored. GFET requires supporting devices, such as volatile memory, to function in an embedded logic system. As far as we understand, graphene has not been studied for volatile memory application, although several graphene non-volatile memories (GNVMs) have been reported. However, we think that these GNVM are unable to serve the logic system properly due to the very slow program/read speed. In this study, a GVM based on the GFET structure and using an engineered graphene channel is proposed. By manipulating the deposition condition, charge traps are introduced to graphene channel, which store charges temporarily, so as to enable volatile data storage for GFET. The proposed GVM shows satisfying performance in fast program/erase (P/E) and read speed. Moreover, this GVM has good compatibility with GFET in device fabrication process. This GVM can be designed to be dynamic random access memory (DRAM) in serving the logic systems application. We demonstrated GVM with the structure of FET. By manipulating the graphene synthesis process, we could engineer the charge trap density of graphene layer. In the range that our measurement system can support, we achieved a high performance of GVM in refresh (>10 ${\mu}s$) and retention time (~100 s). Because of high speed, when compared with other graphene based memory devices, GVM proposed in this study can be a strong contender for future electrical system applications.