• 한국전산유체공학회지
• /
• 제19권3호
• /
• pp.8-13
• /
• 2014

In this study, wave characteristics coming with oblique incident angle to permeable trapezoidal submerged breakwater on the porous seabed are calculated by using boundary element method. This numerical analysis, based on the wave pressure function, is analyzing the continuity in the analytical region including fluid and structure. From the comparison of the reflection coefficients and damping coefficient, the results of this study are in good agreement with the existing results. The peak values of reflection coefficient obtained by permeable trapezoidal submerged breakwater on the porous seabed are smaller than those of permeable trapezoidal submerged breakwater on the non-porous seabed. The velocity vector in front of permeable trapezoidal submerged breakwater on the porous seabed is smaller than that in front of permeable trapezoidal submerged breakwater on the non-porous seabed with out the energy loss.

• 한국해양환경ㆍ에너지학회지
• /
• 제6권4호
• /
• pp.45-51
• /
• 2003

본 연구에서는 경계요소법을 이용하여 불투과성 사다리꼴형상 잠제에 의한 파랑의 반사율과 투과율을 이론적으로 수치해석 하였다. 해석기법으로는 유체와 투과성 영역을 동시에 해석할 수 있는 파압함수를 사용하였으며, 이론적으로 간단히 하기 위해, 투과성 영역내의 파랑의 운동은 선형소산계수와 부가질량계수를 도입하여 정식화하였다. 사다리꼴형상 잠제의 소파특성은 잠제의 법면경사의 변화에 대한 의존도가 높은 것을 알 수 있었다.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.225-228
• /
• 2008

There are many studies about submerged structures or porous wave absorbers to decrease damage of coast and structures. Submerged structures and porous wave absorber are decreasing energy of incoming wave by reflecting or dissipation with changing depth or with porous rubble mound. This study addresses the reflection and transmission of long wave from a trapezoidal breakwater and a vertical porous wave absorber at the same time. A systematic shape transfer is derived to determine wave reflection and transmission. And periodic solutions are matched at the slope and the front face of the absorber by assuming continuity of pressure and mass. The transmission coefficient is determined as a function of parameters describing the incoming waves, transmitting waves through the trapezoidal breakwater and the absorber characteristics.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 춘계학술대회 논문집
• /
• pp.133-138
• /
• 2000

In this paper some shapes of the FBW cross sections were examined to improve the performance of FBW for the long wave. Trapezoidal section and prominence section were examined. Linear potential theory is used and the boundary element method is use for numerical computation. Proper choice of the pontoon geometry may improve the transmission coefficient in the long wave range for a given wave period.

• 한국항만학회지
• /
• 제8권2호
• /
• pp.57-65
• /
• 1994

A theoretical formulation is performed to investigate the wave reflection and transmission ratios by a submerged multi-layered rubble-mound breakwater. This theory, which is based on the linear boundary integral method, can be extended to the multi-layered breakwater with arbitrary cross section. In the theoretical analysis evanescent mode wave is not considered, since fictitious open boundaries are put on the places far from the structure. Therefore the mathematical presentation may be simpler, and computational time shorter. The validity of obtained numerical results is demonstrated by comparing with ones of impermeable and permeable breakwaters. Comparison shows resonable agreement. On the basis of these verifications this theory is applied to the one and two-layered submerged rubble-mound breakwater with trapezoidal type.

• 한국항해항만학회지
• /
• 제37권3호
• /
• pp.283-289
• /
• 2013

Wave profiles coming with oblique angle to trapezoidal submerged breakwater on the porous seabed are computed numerically by using a boundary element method. The analysis method is based on the wave pressure function with the continuity in the analytical region including fluid and structure. When compared with the existing results on the oblique incident wave, the results of this study show good agreement. The fluctuation of wave profiles is increased in the rear of the submerged breakwater due to the increase of the transmission coefficient, as the incident angle increases. In addition, in the case of the wave profiles passing over the submerged breakwater on porous seabed, it is able to verify that the attenuation of wave height occurs more significantly due to the wave energy dissipation than that of passing over the submerged breakwater on the impermeable seabed. The results indicate that wave profile own high dependability regarding the change of oblique incident waves and porous seabed. Therefore, the results of this study are estimated to be applied as an accurate numerical analysis referring to oblique incident waves and porous seabed in real sea environment.

• 한국해양환경ㆍ에너지학회지
• /
• 제8권2호
• /
• pp.67-73
• /
• 2005

부방파제의 특성을 간단히 검토하고 수치해법을 이용하여 소파성능을 분석하였다. 비점성 포텐셜 유동의 일반적인 해법인 경계면적분법을 사용하였고, 다양한 형상의 부방파제 2차원 단면특성을 투과율을 중심으로 살펴보았다. 계류계의 강도와 질량관성반경 및 흘수의 영향을 기본적인 폰툰 형태에 대하여 고찰하였고, 사다리꼴, 중절모형상, 탁자 형상 등의 단면에 대하여 형상에 변화를 주며 소파특성을 조사하였다. 각 단면마다 효과적인 소파가 기대되는 입사파의 파장이 달라지지만 입사파의 파장과 부체의 길이비가 10 이상이 되는 경우까지 만족스런 소파가 이루어지는 경우도 있다.

• 한국수자원학회논문집
• /
• 제36권5호
• /
• pp.741-749
• /
• 2003

본 연구에서는 사다리꼴형상 투과성 수중방파제에 의한 정현파의 Bragg반사에 대해 수리모형실험과 수치모형실험을 수행하였으며, 두 실험결과를 비교하였다. 수치해석에 적용된 모형에서는 공간 평균된 Wavier-Stokes 방정식을 투과체 내에서의 지배방정식으로 사용하였고, 자유수면변위를 추적하기 위해 VOF기법을 적용하였다. 수리실험결과와 수치해석결과는 비교적 잘 일치하였으며, 투과성 수중방파제에 의한 반사계수는 불투과성에 비해 낮게 나타나고, 방파제의 배열이 증가함에 따라 반사계수는 증가함을 보였다.

• 한국해안해양공학회지
• /
• 제15권3호
• /
• pp.167-175
• /
• 2003

본 연구에서는 규칙파를 적용한 수중방파제의 반사특성을 수리모형실험으로 조사하였다. 다양한 형상의 수중방파제에 의한 반사특성을 수리실험 및 수치적으로 검토하였으며, 실험에 사용된 수중방파제의 형상은 사각형, 삼각형, 사다리꼴 및 반원형이다. 수리모형실험 결과는 고유함수전개법을 이용하여 해석한 결과와 비교하였으며, 수리실험에 의한 반사계수가 해석에 의한 결과보다 약간 작게 나타났지만, 두 결과는 비교적 잘 일치하였다. 본 연구결과는 실제설계에 있어 수중방파제의 형상을 결정하는데 있어 유용한 자료가 될 수 있을 것이다.

• 한국해양공학회지
• /
• 제33권1호
• /
• pp.68-75
• /
• 2019

A low-crested structure (LCS) is an excellent feature not only because it provides shore protection but also because it is fully submerged. However, in order to properly control waves, it is necessary to maintain a certain range of crest height and width in consideration of the wave dimensions at the installation area. According to previous studies, an LCS has some wave breaking effect when the crest width is more than a fourth of the incident wavelength and the crest depth is less than a third of the incident wave height. In other words, if the crest width of the LCS is small or the crest depth is large, it cannot control the wave. Therefore, when an LCS is installed in a large sea area with a great tidal range in consideration of the landscape, waves cannot be blocked at high tide. In this study, the hydraulic performances of a typical trapezoidal LCS with a constant crest height and a low-crested structure with an adjustable crest height, which was called a tide-adapting low-crested structure (TA-LCS) in this study, were compared and evaluated under various wave conditions through hydraulic experiments. It was found that the wave transmission coefficients of the TA-LCS at high tide were lower than the values for the typical LCS based on empirical formulas. In addition, the hydraulic performances of the TA-LCS for wave reflection control were 12.9?30.4% lower than that of the typical LCS. Therefore, the TA-LCS is expected to be highly effective in controlling the energy of incoming waves during high tide even in a macro-tidal area.