• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.9
• /
• pp.1273-1281
• /
• 2003

The present study is mainly motivated to investigate the vaporization, auto-ignition, and combustion of liquid fuel spray injected into high pressure environment. The unsteady, multi-dimensional models were used for realistic simulation of spray as well as prediction of accurate ignition delay time. The Separated Flow (SF) model which considers the finite rate of transport between liquid and gas phases was employed to represent the interactions between spray and gas field. Among the SF models, the Discrete Droplet Model (DDM) which simulates the spray using finite number of representative samples of discrete droplets was adopted. The Eulerian-Lagrangian formulation was used to analyze the two-phase interactions. In order to predict an evaporation rate of droplet in high pressure environment, the high pressure vaporization model was applied using thermodynamic equilibrium and phase equilibrium at droplet surface. The high pressure effect as well as high temperature effect was considered in the calculation of liquid and gas properties. In case of vaporization, an interaction between droplets was studied through the simulation of spray. The interaction is shown up differently whether the ambient gas field is at normal pressure or high pressure. Also, the characteristics of spray behavior in high pressure environment were investigated through the comparison with normal ambient pressure case. In both cases, the spray behaviors are simulated through the distributions of temperature and reaction rate in gas field.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.8
• /
• pp.145-155
• /
• 1998

An $H{\infty}$ controller with a roll eccentricity filter is proposed to alleviate the effect of entry thickness variation and roll eccentricity occured in rolling stands themselves of tandem cold mills. A robust controller to the disturbances is designed by H$_{\infty}$ control techniques, which can reflect the input direction of disturbances and the knowledge of disturbance spectrum in the frequency domain. First, fundamental problems in tandem cold mills such as process transport delay inherent in the exit thickness measurement and the feedforward loading of roll eccentricity signals on the exit thickness be overcome by the roll eccentricity filtering and the compensation for the error of gaugemeter thickness estimator. And non-satndard $H{\infty}$ control problem caused by the selection of weighting function having poles on the $J{\omega}$-axis is discussed. The resultant controller composed by an $H{\infty}$ controller and an estimator for the roll eccentricity is evaluated through computer simulations. The effectiveness of the proposed control method is compared to that of the conventional LQ controller method and a feedforward controller for the roll eccentricity, which has been already studied.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.4
• /
• pp.401-409
• /
• 2004

A monitoring system for container using CPS is the system for positioning and managing containers in real time. CPS is capable of positioning the container, promptly with a reasonable amount of accuracy. Facility managers of ports or airports should have loading, unloading, and keeping freight effectively. Transport companies or freight owners should allocate moving container properly and be able to prevent the loss or delay of freight. In this study, the position and pathways of container are monitored by real-time tracking method. The absolute and relative locations of container are monitored digitally and visually from TC_loading to TC_unloading yard. It has been tested the movement of the containers equiped with GPS, and its accuracy and efficiency were analyzed.

• Journal of the Korean Institute of Navigation
• /
• v.21 no.1
• /
• pp.13-31
• /
• 1997

Being situated at the key point of northeast asia, the port of Inchon as an entrance to the captial city, Seoul is expected to play in marine transportation in Korean Pennisular on the verge of its reunification. In this thesis, inner-lock physical disstribution system of the port was analyzed, which treats more than 82% of total incoming and outgoing cargoes. The overall findings are as follows; 1. In thet viewpoint of physical distribution system of the port, it takes disadvantages of accessing to inner lock berth due to such natural restrictions as tides, passing the lock and so on. And insufficient port facilities as a whole, causes delay in quay-handling, transfer and storage, also facing with serious congestion in inland transport on the road. 2. It was revealed that the port facilities are insufficient yet in spite of its improved productivity by means of raising the effectiveness of port operation and of installing advanced cargo handling facilities. 3. In order to enhance the effectiveness of inner port physical distribution system , the improvement of lock facilities, expansionof port facilities and more effective terminal operating system are crucial. 4. To ensure the measures to solve the above problem, existent outer-lock ports such as Inchon Sourthern-port and Northern-port are necessary to be redeveloped more positively , otherwise a new port at outskirt of the city should be developed to ensure free connection to inland transportation.

• Nuclear Engineering and Technology
• /
• v.32 no.1
• /
• pp.57-66
• /
• 2000

The RELAP5 code has been developed for best-estimate simulation of transients and accidents for pressurized water reactors and their associated systems, but it has not been fully assessed for those of CANDU reactors. However, a previous study suggested that the RELAP5 code could be applicable to simulate the transients and accidents for CANDU reactors. Nevertheless, it is indicated that there are some works to be resolved, such as modeling of headers and multi-channel simulation for the reactor core, etc. Therefore, this study has been initiated with an aim to identify the code applicability for all the postulated transients and accidents in CANDU reactors. In the present study, the small inlet header break experiment (B8604) in the RD-14 test facility was simulated with RELAP5/MOD3.2 code. The RELAP5 results were also compared with both experimental data and those of CATHENA analyses performed by AECL and the analyses demonstrated the code's capability to predict major . phenomena occurring in the transient with sufficient accuracy for both Qualitative and quantitative viewpoint However, some discrepancies in the depressurization of the primary heat transport system after the break and the consequent time delay of the major phenomena were also observed.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.2075-2078
• /
• 2002

Internet became the most popular network in spite of its weakness in realtime multimedia service. Many experts believe that the Internet has the potential to become the main multimedia distribution network of the near future. Currently, it does not provide any (BoS guarantees and, even when it does, guaranteed quality delivery of video may turn out to be too expensive. Unavoidable packet losses and delay jitter caused by congestion in a best effort delivery environment require use of intelligent transport techniques for effective video delivery. According to market needs of better quality of service (QoS) fur realtime multimedia services over Internet, they have been standardizing RSVP, IntServ, and DiffServ This paper combines the benefits of QoS mechanisms such as RSVP/IntServ with scalable video encoding. We propose that more important bit stream is given more priority such that limited network resources are guaranteed far the stream. Various prioritizing approaches are proposed and compared to normal approach by using Network Simulator. The calculated QoS parameters such as packet loss rate are used to calculate degree of degradation in video quality. In this Paper, proposed methods can be implemented adaptively to Von protocol, such as H.323, SIP.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.321-327
• /
• 2010

A simplified analytical modeling for micro-sized single metal particle combustion in air was conducted in the present study. The metal particle combustion consists of two distinct reaction regimes, ignition and quasi-steady burning, and the thermo-fluidic phenomena in each stage are formulated by virtue of the conservation and transport equations. Reliability of the model is shown by rigorous validation of the method with emphasis laid on the characterizing the commanding parameters. Effects of Initial particle size, initial oxide film thickness, convection, ambient pressure and temperature are examined and addressed with validation.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.11
• /
• pp.173-178
• /
• 2011

In this paper, we propose an efficient seamless handover protocol in NEMO environment. Yokoda et al 4. proposed fast handover method with collaboration of access routers in local network and Teraoka et al. 1 showed fast handover method with collaboration of layers in mobile network. These methods can delay the time of overall binding update and increase packets loss when link of router is unstable because they transport packets through only one path or link of router. And they don't also mention redirection method of packets in their protocol in case of unstable link state of routers. The proposed protocol can execute fast binding update and reduce packets loss with collaboration of routers in mobile network.

• The KIPS Transactions:PartC
• /
• v.16C no.3
• /
• pp.383-392
• /
• 2009

Next generation network (NGN) is a packet-based converged network to support session and non-session services in QoS-enabled broadband transport network. QoS based resource control must be defined to support differentiated services for various network users in NGN. This paper defined parallel control schemes for NGN resource control interfaces to minimize session and resource control delays. We simulated the existing and proposed NGN control schemes to measure and analyze control delays and completion ratios. By arrival rate of 120 in two-phase resource control, we checked out that completion ratios of sequential and parallel schemes achieved 100%, and the control delay of parallel scheme was improved by about 21.5% compared to that of sequential scheme.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.8
• /
• pp.1391-1400
• /
• 2008

In recent yeats, SCTP is known as the next transport layer protocol for connection-oriented and reliable data transfer after TCP/UDP. The SCTP was developed on the basis of the existing TCP and was designed to eliminate defects of TCP. SCTP has the different characteristic of multi-streaming and multi-homing from TCP. In this paper, we studied the defects of the performance of communication using the traits of multi-homing. And we evaluated the efficiency for each application services on the basis of SCTP of IPv6. Also, we analysed the delay time of a packet using SCTP and TCP. We noticed that the efficiency of SCTP is better than that of TCP.