• Journal of agricultural medicine and community health
• /
• v.44 no.1
• /
• pp.39-42
• /
• 2019

Zoonoses are the diseases that are transmitted to human being from vertebrate animals either from livestock animals or from wildlife. Recently, zoonoses are increasingly common as a result of incremental human-animal contact. Propagative infections in wild animals and livestock are transmitted to human beings who are encountered with them. In general, wild animals can transmit infectious agents to livestock, and then livestock further transmit them to human being is a simple model of on how zoonotic diseases get transmitted to human being. This model emphasizes the importance of early detection of zoonoses by surveillance at its incipient stage. Cooperation between the respective ministries plays an important role in the identification of zoonoses and planning for the formulation of better preventive and control policy and strategy. We will be able to predict the occurrence of zoonotic diseases in human on the basis of disease trends in wildlife and livestock once when we obtain the surveillance data and data generated by respective ministries through sound cooperation and collaboration.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.5 no.1
• /
• pp.39-50
• /
• 2002

Hepatitis B viral infection which affect about 10% of Korean population manifests asymptomatic carrier, chronic hepatitis and liver cirrhosis and even associates with hepatocellular carcinoma. Clinical manifestations induced by hepatitis B virus vary depending on the degree of immune response by cytotoxic T cells against viral epitope-presenting liver cells. Since hepatitis B virus presents high rate of mutaton that might change the presented epitope and eventually alter immune response, viral mutations, especially in promoters and enhancers, have an important implication in hepatic inflammation and viral replication. To identify mutations related to the hepatic inflammation, we investigated sequence variations of hepatitis B viral promotor regions in the presence or absence of symptoms in hepatitis B carriers. For this, sera from persistently hepatitis B virus-infected mother-child pairs were collected. After PCR amplifiation of all hepatitis B viral promoters (C promoter, S1 promoter, S2/S promoter, X promoter) using serum DNA from each pair, viral promotors were sequenced by automatic sequencer and then sequence data were analyzed by ClustalW. In most cases, the dominant type of maternal virus was transmitted to the child. However, in some children, some new host specific viral variants could be observed in Cp, S1p and S2/Sp. The mutations in C promoter did not seem to be vertically transmitted but arose in new host independently after the wild type had been transmitted. Enhancer I containing X promoter revealed high host specific variations as has been reported before. Two S promoters, S1p and S2/Sp, have shown some point mutations in children, but no deletion mutations were detected as in chronic hepatitis patients in whom deletion mutations are frequently found. In conclusion, the children with the vertically transmitted hepatitis B virus mostly retain the dominant type virus that had been transmitted. However, host specific variants tended to accumulate over time, possibly as clinical symptoms develop.

• Restorative Dentistry and Endodontics
• /
• v.23 no.1
• /
• pp.366-378
• /
• 1998

Thermocondensation root canal filling technique have been used to fill accessary canals or to obtain homogeneous root caral fillings. But these thermocondensation technique inevitably produce heat in the canal which can be transmitted through the dentin and cementum and consequently damage periodontal ligamental cells and osteoblasts. In this study, System $B^{TM}$(Analytic technology, WA.D.S.A.) was used to evaluate the reaction of periodontal ligament tissue to "Continous Wave condensation technique" introduced by Buchanan, and the transmitted root surface temperature was measured according to measured root thicknesses. 12 Mandibular incisors of two adult dogs were used for the experiment. 6 controls were filled by lateral condensation technique with sealer.3 specimens were apically filled by Continuous Wave technique at $200^{\circ}C$ for 5 seconds and remaining 3 specimens were additionally backfilled using System $B^{TM}$(Analytic technology, WA.D.S.A.) was used to evaluate the reaction of periodontal ligament tissue to "Continous Wave condensation technique" introduced by Buchanan, and the transmitted root surface temperature was measured according to measured root thicknesses. 12 Mandibular incisors of two adult dogs were used for the experiment. 6 controls were filled by lateral condensation technique with sealer.3 specimens were apically filled by Continuous Wave technique at $200^{\circ}C$ for 5 seconds and remaining 3 specimens were additionally backfilled using System $B^{TM}$ at $100^{\circ}C$ for 20 seconds. Six weeks later, the dogs were sacrificed and the teeth stained with Hematoxylin and Eosin for histologic examination. 6 extracted human teeth were used to measure the transmitted temperature. After cutting off the crown, the canals were prepared and divided into 3 groups with root thickness of 1.5mm, 1.0mm, 0.5mm, 2 teeth in each group. Inside each root canal, System $B^{TM}$ was heated as with the temperature for the apically condensed and the back filled group, and the transmitted heat was measured on the external surface of the root. The temperature of System $B^{TM}$ heat spreader at $200^{\circ}C$ and $100^{\circ}C$ was also measured at root temperature. It can be concluded as follows: 1. In the thin area (200-$250{\mu}m$) of the root, root resorption could be seen even with heating at $200^{\circ}C$ for 5 seconds. 2. When the spreader was heated at $200^{\circ}C$ for 5 seconds and additionally at $100^{\circ}C$ for 20 seconds for backfill, all teeth showed root resorption regardless of their root thickness. 3. The transmitted external root surface temperature was higher as the root thickness decreased and as the heating time increased. In the thermocompaction technique using System $B^{TM}$, the spreader should be heated for the minimal time and used only in the apical area. The heated spreader shouldn't inserted to the binding point of the canal and backfilling should be done with other means of minimally heated gutta percha technique.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1655-1658
• /
• 2004

In this paper, we design and implement remote servo motor control system with real-time micro embedded operating system. The system, where controller and camera image grabber are mounted, handles control commands transmitted from a remote PC web browser. A hard real-time servo motor driver running on the real-time micro embedded OS and then a digital control application which confirms precise sampling time intervals is constructed. Frame grabber images transmitted from camera are saved in a image data format to view on remote PC web browser.

• Proceedings of the IEEK Conference
• /
• 2000.06b
• /
• pp.242-245
• /
• 2000

In this paper we present new idea to highly compress the images. The previous image is transformed with wavelet and the transformed data are transmitted. The previous image is subtracted from the next image. Then difference values per pixel are scanned to search motion areas and boundaries. In the motion boundaries, motion vectors and error values are transformed with wavelet and transmitted. We also include camera motion estimation and compensation. In this method this system has advantages of more compressive data, better quality of picture and shorter processing time compared to MPEG2, MPEG4.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1251-1253
• /
• 2004

Light diffraction on optically anisotropic substrates with the surface microrelief has been calculated by using the OAGSM method. Varying of the microrelief depth and material birefringence allows to realize different polarization state of the light beam transmitted or reflected by the substrate. The approach can be used to optimize the LCD backlight.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.12
• /
• pp.97-103
• /
• 1996

This paper presents a new security verification technique based on an image encryption by a white noise image that serves as an encryption key. In the proposed method that resembles holographic process, the encryption process is executed digitally using FFT routine which gives chances for separating corruptive noise from reconstructed primary image The encoded image thus obtained is regarded as an nterference pattern caused by two lightwaves transmitted through the primary image and the white noise image. The decoding process is executed optically and in real-tiem fashion where lightwave transmitted through the white noise image illuminates the encrypted card.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.1
• /
• pp.145-151
• /
• 1998

This paper addresses the results of an experimental and analytical research of cylindrical coil spring subjected to dynamic behavior. Transfer functions are presented for both deflection and transmitted force as the output with force as the input. Steady state sinusoidal magnitude ratio and transmittance are plotted along with experimental data. It is shown that dynamic characteristic of cylindrical coil spring must be used to enhance the reability of vibration system dynamic behavior analysis in actuating over some frequency.

• Proceedings of the KSR Conference
• /
• 1998.05a
• /
• pp.419-426
• /
• 1998

The information for operating the train should be transmitted to train, with extreme security. In our system, The information, such that the allowable velocity of the train, train existence in current area, and other data necessary for operating train, is transmitted in the form of FM signal. Received by the receiver located on train, the signal is filtered, demodulated, and analyzed for extracting the original information. The analysis of the demodulated signal is done through FFT algorithm using sliding slot. The simulation results shows the validity of the algorithm.

• ETRI Journal
• /
• v.6 no.4
• /
• pp.3-8
• /
• 1984

Frequency division multiplexed 3ch. Color TV signals have been transmitted via optical fiber by employing $1. 3\mum$ InGaAsP DH-laser diode, graded index optical fiber and Ge-APD as optical components. Overall system margin of 20 dB was realized at weighted SNR of more than 49 dB. With this system margin, measured DG and DP were less than 10% and $5^{\circ}$respectively. Throughout this experiment, it was confirmed that multichannel TV signals could be economically transmitted over optical fiber in short haul networks. This paper describes system outlines and hardware implementation results.