• Journal of Korean Vacuum Science & Technology
• /
• 제6권3호
• /
• pp.120-125
• /
• 2002

The aim of the present work is to optimized the annealing parameter in both front and back screen printed contacts realization on p-type multicrystalline silicon and with phosphorus diffused. The RTA treatments were carried out at various temperatures from 600 to 850$\^{C}$ and annealing time ranging from 3 min to 5 min in air, O$_2$and N$_2$ ambiance. The contacts parameters are obtained according to Transmission Line Model measurements. A good RTA cycle is obtained with a temperature plateau of 700$\^{C}$-750$\^{C}$ and annealing ambiance of air. Several processing parameters required for good cell efficiency are discussed with an emphasis placed on the critical role of the glass frit in the aluminum paste. A anamolus behaviour of Aluminum n-doping on p-type Si wafer, contact at high temperature have also been studied.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2000년도 유체기계 연구개발 발표회 논문집
• /
• pp.45-49
• /
• 2000

Vibration and noise problem in a hydraulic system became one of very important factors in evaluating the performance of a hydraulic system. It is known that vibration and noise in a hydraulic system is directly related to flow pulsation in the hydraulic pump in the system. This study investigated a modeling and simulation technique for pulsating flow in a swash plate type axial piston pump. The key design factors of the pump related to flow pulsation phenomenon of the pump are the physical parameters for notches on the valve plate of the pump. By the numerical analysis, effects of the physical parameters of the notch on the flow pulsation was elucidated.

• 상하수도학회지
• /
• 제27권1호
• /
• pp.129-138
• /
• 2013

Water interruption is often caused by a rupture in the branch-like singular pipeline. This will cause critical complaints from household and may decrease public service quality. As an alternative of singular pipeline, additional parallel pipeline could be installed for sustainable water supply. This system is called double pipeline system and able to be utilized for water transmission line between treatment plant and distribution reservoir. Construction of double pipeline was thought to increase capital cost, which can be an issue to waterworks authorities. Reducing capital cost was possible by means of installing connectors between two parallel pipelines because of reduced diameter of each pipe. To obtain optimal design condition for connectors, it was necessary to compare water pressure according to accident location, to investigate flow according to connection pipe spacing, connection pipe diameter, and aging of pipe. Reliable and economical connection layouts were determined based on these results. The cost estimation for each design condition was carried out. Cost was approximately reduced by 20 ~ 30 % compared to the double pipeline without connections. In addition to this, connection between double pipelines could expect extra benefits for maintenance since the pipe could be repaired and rehabilitated without interruption.

• Journal of Power Electronics
• /
• 제14권5호
• /
• pp.1008-1027
• /
• 2014

An electric scooter with a V-belt continuously variable transmission (CVT) driven by a permanent magnet synchronous motor (PMSM) has a lot of nonlinear and time-varying characteristics, and accurate dynamic models are difficult to establish for linear controller designs. A PMSM servo-drive electric scooter controlled by a novel hybrid modified recurrent Legendre neural network (NN) control system is proposed to solve difficulties of linear controllers under the occurrence of nonlinear load disturbances and parameters variations. Firstly, the system structure of a V-belt CVT driven electric scooter using a PMSM servo drive is established. Secondly, the novel hybrid modified recurrent Legendre NN control system, which consists of an inspector control, a modified recurrent Legendre NN control with an adaptation law, and a recouped control with an estimation law, is proposed to improve its performance. Moreover, the on-line parameter tuning method of the modified recurrent Legendre NN is derived according to the Lyapunov stability theorem and the gradient descent method. Furthermore, two optimal learning rates for the modified recurrent Legendre NN are derived to speed up the parameter convergence. Finally, comparative studies are carried out to show the effectiveness of the proposed control scheme through experimental results.

• 한국음향학회지
• /
• 제42권4호
• /
• pp.285-297
• /
• 2023

본 연구의 목적은 대한민국 학교 교실 중 학교공간혁신사업을 통해 도입된 9세 이하 초등학생이 사용하는 1, 2학년 창의융합교실의 음향성능을 조사하는 것이다. 이를 위해 창의융합교실 3개를 대상으로 음향성능을 측정하였다. 측정된 음향인자는 배경소음, 잔향시간(Reverberation Time, RT), 음성명료도(D₅₀), 음성전달지수(Speech Transmission Index, STI) 및 양이간 상호상관도(Inter-Aural Cross Correlation, IACC)였다. 또한 벽체의 차음성능분석을 위해 투과손실(Transmission Loss, TL), 표준화음압레벨차(D_nT) 등을 측정하였고, 교실의 문과 창문의 개폐 여부에 따른 소음레벨을 측정하였다. 그 결과, 배경소음은 공조기를 가동하지 않았을 때 평균 28.0 dB(A) ~ 32.8 dB(A)로 나타났으며 잔향시간은 0.6 s를 초과하지 않았다. 다양한 책상 배치에 따라 양이간 상호상관도(IACC)에 차이가 나타났는데, 중심선과 음원 근처 좌석에서 IACC 값이 높게 나타났다. 특히 음원을 정면으로 바라보는 중심선의 좌석에서 더 높은 IACC가 측정되었다. 문과 창문의 개폐에 따른 교실 내 소음레벨은 모든 창문과 문을 열었을 때와 복도측 창문과 문을 열었을 때 기준을 초과하였다.

• 대한기계학회논문집A
• /
• 제34권2호
• /
• pp.237-243
• /
• 2010

본 논문은 자동차 변속기의 헬리컬기어 검사 장치에 대한 것이다. 기어 프로파일 전용 검사설비는 시간이 많이 소요되므로 생산라인용으로 적합하지 못하다. 본 논문에서 사용된 마스트기어를 이용하여 생산된 기어와 비교하여 방법은 보다 경제적이며 효율적이다. 본 논문에 사용된 3가지 기어검사 파라미터는 nick, 흔들림(run-out) 및 PCD (pitch circle diameter) 등이다. 기어검사장치의 측정정밀도에 영향을 미치는 요소들에 대해서도 또한 언급되었다. 이 장치는 현재 국내에서 전량 수입되는 기어 생산라인용 설비에 실제적으로 사용될 것이다.

• 한국자기학회지
• /
• 제17권6호
• /
• pp.242-245
• /
• 2007

전자기적 해석 시뮬레이션 프로그램인 유한요소 방식의 HFSS(High Frequency Structure Simulation)를 사용하여, 전도 노이즈 흡수 sheet의 흡수특성을 해석하고 그 결과 값을 실측값과 비교함으로써 해석방법의 타당성을 검토하였다. 마이크로스트립 선로는 $S_{11}\simeq-30dB,\;S_{21}=0dB$의 반사투과 특성을 보여 전도 노이즈 흡수율 측정에 이상적인 전송특성을 보였다. 순철 압분체-고무 복합체 sheet의 복소비투자율과 복소비유전율을 입력하여 노이즈 흡수율을 계산한 결과 실측치와 비교적 잘 일치하는 해석결과를 얻었다. 주파수, 흡수계의 크기(특히 선로를 덮는 길이)에 따라 노이즈 흡수율은 현저한 변화를 보였으며, 이는 재료의 손실 특성과 밀접히 연관되어 있음을 제시하였다. 이러한 해석방법은 다양한 조성 및 크기의 전도 노이즈 흡수체의 설계에 유용히 사용될 수 있음을 제안할 수 있다.

• 한국전자통신학회논문지
• /
• 제19권1호
• /
• pp.1-10
• /
• 2024

실내 로비 환경에서 다중 경로에서 6, 10, 17 GHz 주파수 대역의 전파 특성을 분석하였다. 가시선(Line-of-sight, LOS) 및 비가시선(Non-line-of-sight, NLOS) 경로는 송신 안테나 위치에서 수신 안테나 위치까지 2-16 m (0.5 m 간격) 거리에서 측정되었다. 기본 전송 손실은 경로에 해당하는 FI(Floating intercept) 경로 손실 모델을 사용하여 세 가지 매개변수를 비교하였다. RMS(Root mean square) 지연 확산은 측정 결과를 누적 확률 10, 50, 90%로 비교하였다. 기둥의 존재와 특이한 로비 구조로 인해 측정된 모든 주파수에서 전파 손실과 전파 지연이 발생하였다. 이에 실내 로비 환경에 대한 측정 시나리오와 표준 측정 데이터 제공을 제안하였다. 이를 통해 다양한 구조의 실내 로비 환경에서 5G 및 밀리미터파 대역의 전파 특성에 대한 연구에 기여할 것이다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제1권4호
• /
• pp.209-215
• /
• 2001

In this paper a method for analysis and modelling of coplanar transmission interconnect lines that are placed on top of silicon-silicon oxide substrates is presented. The potential function is expressed by series expansions in terms of solutions of the Laplace equation for each homogeneous region of layered structure. The expansion coefficients of different series are related to each other and to potentials applied to the conductors via boundary conditions. In the plane of conductors, boundary conditions are satisfied at $N_d$ discrete points with $N_d$ being equal to the number of terms in the series expansions. The resulting system of inhomogeneous linear equations is solved by matrix inversion. No iterations are required. A discussion of the calculated line admittance parameters as functions of width of conductors, thickness of the layers, and frequency is given. The interconnect capacitance and conductance per unit length results are given and compared with those obtained using full wave solutions, and good agreement have been obtained in all the cases treated

• 전자공학회논문지A
• /
• 제28A권1호
• /
• pp.23-29
• /
• 1991

In order to improve the radiation characteristics of the microstrip antenna, microstrip array antenna consisting of one center patch fed by a coaxial probe and several patches directly coupled to the E-plane by microstrip line is analyzed. The equivalent circuit of the array antenna is represented by the conventional transmission line and the various parameters, such as the mdicrostrip line length, the patch length and the feed point location are calculated to improve the radiation pattern for 5-patch array antenna which has the equal patch width. The 5-patch array antenna with the radiation pattern which has low sidelobe level and narrow beam width is fabricated and then the measured results are compared with the computed values and the results of the single patch microstrip antenna too.