• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.2
• /
• pp.129-134
• /
• 2022

The resonant bio-sensor of bi-level grating structure with mushroom profile has been designed for operating in the near-infrared (NIR) wavelength range under transverse electric (TE) polarization. The rigorous modal transmission-line theory (MTLT) is applied to determine the optical characteristics, and the reflection resonance of the grating structure is analyzed by varying their geometrical parameters. The numerical result shows that an excited sharp Fano resonance (FR), which does not occur in single layer grating, is demonstrated. The relationship between structure parameters of bi-level grating and the reflectance spectrum in order to guarantee the appearance of FR in the designed structure is fully investigated. An optical bio-sensor with a potential sensitivity of 112.9~214.3 deg/RIU and 447 nm/RIU is designed based on the proposed structure. The proposed mushroom profile may serve as a powerful sample for the design of optical bio-sensors with a wide range of applications.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.3 no.2
• /
• pp.25-30
• /
• 2010

In this paper, a novel notch resonator is proposed based on Rectanglar Split Ring Resonator (R-RSS) element. We represented the electrical characteristics for R-SRR elements coupled with microstrip line, and measured result is compared with electromagnetic simulation (HFSS) result. We also solved equivalent circuit for R-SRR element, and also discussed influences of change structural parameters of R-SRR. the size of R-SRR is the most important parameters for frequency tuning. Also we can make tunable resonator form the basic structure. This novel resonator can apply to design of tunable bandpass filter and voltage control oscillator.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.6
• /
• pp.1255-1260
• /
• 2011

In this paper, we study on the reliability of Very High-rate Power Line Communication (VH-PLC) for Smart Grid, so that the resultant data rate is over 400Mbps at a physical layer. Firstly, reviewing the research trend of the PLC, we discuss the required techniques for supporting the Smart Grid. Considering a pre-specification with the value of several parameters, we investigate a multi-carrier modulation technique to overcome limitations of higher rate transmission under power line channel environments. Then, we propose a system specification of the VH-PLC in the sense of enhancing two features. One is resolving the problem of the co-existence of the deployed high-speed PLC according to the published standardization of KS X 4600-1 in Korea. The other is getting better performance on the grid adopting the diverse element techniques, such as multi-carrier modulation, a subcarrier utilization mode, a variable rate LDPC (Low Density Parity Check) code, and a time and frequency diversity technique. Further, a simulation tool, composed of an Event-Driven simulator and a Time-Driven simulator, is developed for the purpose of verifying the system performance and continuously cross-checking the test bench signal of the proposed VH-PLC system.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1668-1671
• /
• 2003

A novel dual-frequency microstrip printed-dipole antenna operating at 5 GHz and 10 GHz is presented. This antenna is designed for wireless and mobile communication. The balance step coplanar strip is used to be a transmission line at the center of dipole with matching impedance at 50 ohm. Using the conductor strip align on the other side of antenna and adjust the width of step coplanar strip line to improved input impedance matching. By modification for matching impedance of dual frequency antenna are not affected to the radiation patterns. The Finite Difference Time Domain (FDTD) technique is applying to analyze the basic characteristic properties such as $S_{11}$ , input impedance , VSWR and radiation patterns. And these parameters are discussed. The analyze problem space are $51{\times}197{\times}175$ cells and cell dimension are ${\Delta}x=0.3\;mm$ and ${\Delta}y={\Delta}z=0.15\;mm$.

• Proceedings of the KIPE Conference
• /
• 2007.11a
• /
• pp.112-114
• /
• 2007

The voltage stress on line-end coil of the stator winding in the induction motor fed by a PWM inverter is analyzed, using the computer model based on multi-conductors transmission line. A method to calculate circuit parameters, especially, capacitance between the turns and ground is proposed. The voltage distributions inside coil at motor terminal depending on dv/dt are investigated through simulation studies.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.4
• /
• pp.430-436
• /
• 1988

LSF(Line Spectral Frequency) derived from LPC has known as a very useful transmission parameter of speech signals, for it has a good linear interpolation characteristics and a low spectrum distortion at low bit rates coding. This paper presents that it is possible to extract directly the formant frequencies of speech signals from LSF parameter without application of FFT algorithm by comparing the distribution of LSF parameter with the frequency distribution of analysis filter. This paper suggests the advanced algorithm that results in improving the speed of convergence at analytic solution method. Also, for the flexibility of parameters, the process that transforms from LSF to LPC is presented.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.105-106
• /
• 2006

In this paper we describe a driving, control and monitor of ship's emergency lighting system using power line modem.(PLM). Through this paper, experiment confirms that ON-OFF control of multiple SELP, real time transmission and monitor of parameters as to voltage, current, and power values are performed appropriately by PLM communication.

• Proceedings of the Optical Society of Korea Conference
• /
• 1989.02a
• /
• pp.152-156
• /
• 1989

Parameters of a microstrip patch antenna such as the resonant frequency, radiation conductance, and the bandwidth are calculated. The rectangular microstrip patch antenna fed by a microstrip transmission line is fabricated and its resonant frequency, radiation pattern, and input voltage standing wave ratio are measured. The measured resonant frequency for 13.0mm$\times$9.7mm copper clad woven PTFE/glass laminate plate is 9.06Ghz, where the calculative is 9.00Ghz. And the measured vswr shows that the bandwidth of the antenna is 225MHz for vswr less then 2.0 which the calculated quality factor of the patch gives the bandwidth OF 280ghZ. The measured radiation pattern for 5 element as well as 4 element patch array shows less then 4dB deviation in the first side lobes from the designed values for both E and H plane pattern. This diviation is believed to be the power division errors of the power divider.

• Journal of Electrical Engineering and information Science
• /
• v.1 no.2
• /
• pp.96-100
• /
• 1996

This paper describes a concrete method for computing characteristic impedances and effective dielectric constants of the microstrip coupled lines without and with a dielectric overlay. The frequency-independent spectral domain method is used for the analysis of these lines. This method is a powerful, accurate, and numerically efficient approach for planar transmission line structure. For designing the optimal directional coupler, the velocities of even and odd mode must be equal but velocities of these two modes are different in the conventional coupled line which is inhomogeneous. The results show that these two velocities can be almost same according to variations of structural and material parameters in terms of the overlay(superstrate).

• ETRI Journal
• /
• v.23 no.1
• /
• pp.16-22
• /
• 2001

Efficient quantization methods of the line spectrum pairs (LSP) which have good performances, low complexity and memory are proposed. The adaptive quantization range method utilizing the ordering property of LSP parameters is used in a scalar quantizer and a vector-scalar hybrid quantizer. As the maximum quantization range of each LSP parameter is varied adaptively on the quantized value of the previous order's LSP parameter, efficient quantization methods can be obtained. The proposed scalar quantization algorithm needs 31 bits/frame, which is 3 bits less per frame than in the conventional scalar quantization method with interframe prediction to maintain the transparent quality of speech. The improved vector-scalar quantizer achieves an average spectral distortion of 1 dB using 26 bits/frame. The performances of proposed quantization methods are also evaluated in the transmission errors.