• 제목/요약/키워드: transmission length

검색결과 1,099건 처리시간 0.03초

초저속 동영상 전송 (Transmission of Motion Video at Very Low Data Rates)

  • 류영진;김남철
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
    • /
    • pp.225-228
    • /
    • 1988
  • A new transmission scheme is presented for transmitting motion video at very low data rates. In this scheme, two-level cartoons are extracted from gray-level images, and their interframe differences are coded using 2D run-length coding. Experimental results show that the proposed scheme yields compression ratio as high as 216:1.

  • PDF

고속전철의 열차간 데이터 전송을 위한 전송로의 특성에 관한 연구 (Study on the Characteristics of the Transmitter Line for Data Transmitter between Vehicles for High speed train)

  • 최권희;이병석;임용규
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2002년도 추계학술대회 논문집(I)
    • /
    • pp.509-515
    • /
    • 2002
  • Recently, the microprocessor with network function based control system instead of conventional microprocessor is widely used for industrial applications, and also these technologies are widely adopted for train control and monitoring in modem rapid transit system. The purpose of this paper is to propose a criteria for data transmission, which was designed and realized through Korea High Speed Train. Noise, distortion and attenuation are always present in data transmission system and strictly limit performance. This paper describes a method to calculate the propagation constant, attenuation constant, phase velocity and length of stub.

  • PDF

한쪽 면이 열린 동축 공동 공진기의 설계에 대한 연구 (Design of An Open-Ended Coaxial Cavity Resonator)

  • 이윤민;김진국;허정
    • 한국인터넷방송통신학회논문지
    • /
    • 제13권4호
    • /
    • pp.201-208
    • /
    • 2013
  • 본 논문은 한쪽 면이 열린 동축 공동 공진기의 경험적 설계 방법에 대한 연구이다. 공진기의 내부 도체 반경과 공진기의 내경 그리고 길이를 이용하여 설계한다. 그러나 기본 동축 선로 이론을 적용하면 내부 도체 반경과 공진기의 내경 값에 관계없이, 길이 변화에 의해서만 공진 주파수와 Q값의 특성이 달라지는 것을 알 수 있다. 따라서 내부 도체 반경과 공진기 내경 그리고 길이의 영향을 알아내고, 경험적 설계를 통해 이론값과 설계값의 오차를 줄여 최적화된 공진기 설계 방법을 제안한다. 모의실험 결과를 바탕으로 공진기의 내경은 14 mm, 내부 도체 반경은 각각 2 mm, 5 mm, 10 mm 그리고, 공진기의 길이는 8.5 mm로 제작하였다. 제작된 공진기의 공진 주파수는 6.1, 5.7, 6.5 GHz로 측정되었다. 모의실험과 제작된 공진기를 측정한 결과에 의하면, 공진기의 길이가 10 mm이하일 때는 기본 동축 전송 이론을 직접 적용하고, 10 mm이상 일 때는 계산된 공진 주파수에 0.5 GHz보정인자 값을 더함으로써 비교적 오차가 작은 한쪽 면이 열린 동축 공동 공진기를 설계 할 수 있음을 알 수 있었다.

EFFECT OF BREEDING LENGTH ON GENETIC IMPROVEMENT IN JAPANESE HOLSTEIN POPULATION

  • Terawaki, Y.;Shimizu, H.;Fukui, Y.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제9권4호
    • /
    • pp.363-370
    • /
    • 1996
  • The effect of breeding length of sire on genetic progress was examined in the Holstein dairy cattle population in Japan. Genetic progress was extimated by gene flow method. Breeding length of sires directly influences the replacement rates of sires and the selection intensity of sires because there are a fixed number of progeny tested young bulls per year. As breeding length of sires increased, rate of gene flow decreased and average proportions of genes deriving from selected animals had lower asymptotic values. When breeding length was short, average proportions of genes required a longer period to converge to asymptotic values. Changes of Rcow-sire's(sire to breed recorded cows) and Ncow-sire's(sire to breed non recorded cows) breeding length influenced not only transmission of their genes but also that of genes derived from all other selected animals. Irrespective of whether the discount rate was assumed to be 0 or 6%, longer term (${\geq}$ 20 years) expected total genetic improvement was maximized by a sire breeding length of five years. For shorter term assessment(10 years), genetic improvement was maximized by a sire breeding length of three years. There was a linear increase in the contribution of the sire to bulls pathway to the total genetic improvement, with increase in the term of assessment.

DS-SS방식을 이용한 유성 버스트 통신의 도통율 개선 (Improvement of duty rate on Meteor Burst Communication using DS-SS system)

  • 권혁숭
    • 한국통신학회논문지
    • /
    • 제28권9A호
    • /
    • pp.669-677
    • /
    • 2003
  • MBC(meteor burst communications)는 그 전송로의 많은 장점에도 불구하고 도통율이 수%이하로 낮다는 큰 결점이 있다. 이를 위해 큰 경제적 부담 없이 전송 채널의 도통율을 개선하는 방법으로서 참조부호 방식을 이용한 DS(direct sequence)-SS(spread spectrum)방식을 적용하였다. 이 방식은 동기신호의 포착이나 유지에 소요되는 시스템을 생략할 수가 있어서, MBC가 가지는 경제성을 만족하면서 전송채널의 도통율을 개선할 수가 있다. 이 방법으로 개선되는 효과는 수신신호가 약한 환경에서 보다 더 큰 것으로 나타나는데 시뮬레이션에 의하면 평균 버스트 길이가 50ms 인 환경에서는 처리이득이 10dB만 되어도 버스트 길이는 220%를 초과하여 160ms 가 되며 발생빈도는 3.1 배가 증가한다는 것을 알 수가 있었다.

광 위상 공액기가 적용된 WDM 시스템에서 광섬유 분산 계수 변동에 따른 보상 특성 (Compensation Characteristics Dependence on Variation of Fiber Dispersion in WDM Systems with Optical Phase Conjugator)

  • 이성렬;박경호;정명래
    • 한국전자파학회논문지
    • /
    • 제15권5호
    • /
    • pp.517-524
    • /
    • 2004
  • 광 위상 공액기(OPC: Optical Phase Conjugator)가 전체 전송 거리의 중간이 아닌 곳에 위치한 8-채널 WDM 시스템에서 두 전송 구간의 총 분산량 변동에 따른 각 채널의 보상 특성을 NRZ 형식과 RZ 형식별로 살펴보았다. 신호파를 공액파로 만드는 OPC의 비선형 매질로는 광대역 특성을 나타낼 수 있는 HNL-DSF(Highly- Non-linear Dispersion Shifted Fiber)를 사용했다. 우선 OPC를 중심으로 두 전송 구간의 총 분산량이 서로 동일하지 않은 WDM 전송 시스템에서는 전송 파형 형식으로 NRZ보다 RZ를 사용한 경우가 안정된 품질 유지에 더욱 유리하다는 것을 확인하였다. 또한 NRZ 파형 전송의 경우 OPC를 중심으로 두 전송 구간의 총 분산량을 동일하게 설정하는 것보다 상대적으로 길이가 짧은 전송 구간의 총 분산량을 길이가 긴 전송 구간의 총 분산량에 비해 작게 설정하여야 양호한 보상이 이루어지는 것을 확인하였다.

중계 구간의 SMF 길이와 RDPS 분포가 일정하지 않은 분산 제어 광전송 링크를 통한 왜곡된 WDM 신호의 보상 (Compensation for Distorted WDM Signals Through Dispersion Managed Optical Transmission Links with Ununiform Distribution of SMF Length and RDPS of Optical Fiber Spans)

  • 이성렬
    • 한국항행학회논문지
    • /
    • 제16권5호
    • /
    • pp.801-809
    • /
    • 2012
  • 분산 제어 (DM; dispersion management)은 파장 분할 다중 (WDM; wavelength division multiplexed) 채널의 고품질 전송을 위해 광섬유의 그룹 속도 분산 (GVD; group velocity dispersion)과 비선형 효과의 상호 작용에 의해 왜곡되는 신호의 보상할 수 있는 대표적 기술이다. DM이 적용된 광전송 링크의 유연한 구성에 필요한 중계 구간 (fiber span)을 구성하는 단일 모드 광섬유 (SMF; single mode fiber)의 길이와 중계 구간 당 잉여 분산 (RDPS; residual dispersion per span)을 랜덤하게 분포시키는 구조와 인위적으로 분포시키는 구조에서의 최적 전체 잉여 분산 (NRD; net residual dispersion)의 최적치와 유효 입사 전력 범위를 도출하였다. 고려한 SMF의 길이와 RDPS 분포 패턴 모두 precompensation으로 NRD를 조절하는 경우에서는 +10 ps/nm, postcompensation으로 NRD를 조절하는 경우에서는 -10 ps/nm이 최적 NRD라는 것을 알 수 있었다. 그리고 NRD가 상기 값으로 설정된 경우 중계 구간이 증가할수록 SMF 길이를 감소시키고, RDPS를 증가시키는 인위적인 분포의 전송 링크에서의 시스템 성능이 가장 양호하여 균일한 분포의 링크에 비해 유효 입사 전력 범위가 2 dB 정도 신장되는 것을 확인하였다.

분산 제어와 OPC를 갖는 광전송 링크를 이용한 WDM 신호의 Q-factor 개선 (Q-factor Improvements of WDM Signals using Optical Transmission Link with Dispersion Management and OPC)

  • 이성렬
    • 한국항행학회논문지
    • /
    • 제13권1호
    • /
    • pp.27-33
    • /
    • 2009
  • 채널 전송률이 40 Gbps인 WDM 채널들의 성능을 개선시키는 새로운 광전송 링크 기술을 제안하였다. 제안된 광전송 링크는 전체 전송로 중간에 광 위상 공액기 (optical phase conjugator)를 두고 전송로에서 축적된 분산은 분산 제어 (DM; dispersion management)을 통해 보상하는 구조이다. DM이 OPC와 결합하면 DM을 통해 전송 링크 전체에서 축적된 분산량을 줄여줌과 동시에 OPC에 의한 비선형성 보상의 정도를 더욱 좋게 하여 결과적으로 모든 채널들의 Q-factor가 크게 개선되는 것을 확인하였다. 그리고 모든 WDM 채널들의 Q-factor 개선은 광전송 링크의 전체 잉여 분산 (NRD; net residual dispersion)에 크게 의존한다는 것을 알 수 있었다.

  • PDF

Cell Transmission 이론에 근거한 시스템최적 신호시간산정 (Development of A System Optimum Traffic Control Strategy with Cell Transmission Model)

  • 이광훈;신성일
    • 대한교통학회지
    • /
    • 제20권5호
    • /
    • pp.193-206
    • /
    • 2002
  • 신호교차로로 구성된 네트워크의 시스템최적 신호시간산정을 위해 Cell Transmission 이론을 교통류 모형으로 활용한 신호최적화 모형을 제안한다. Cell Transmission 모형은 기존에 소개된 신호최적화 모형과는 달리 충격파, 대기행렬의 길이, 그리고 하류부 교차로 대기행렬의 역류(Spillback)과 같은 과포화 현상을 표현하는데 적절한 이론적이고 실제적인 배경을 지원한다. 모형에서 기점을 출발한 수요차량은 종점에 도착할 때까지 경로선택을 통해서, 그리고 신호시스템은 이러한 수요의 움직임 고려하여 신호시간요소의 최적화를 통한 네트워크의 비용을 최소화하기 위해 서로 협력한다는 의미에서 제안된 모형은 시스템 최적화를 의미한다. 모형은 혼합정수계획법으로 정식화되며 최적신호전략과 고정신호전략간의 실험계획을 통해 구축된 모형을 비교·평가한다.

154kV 혼합송전선로 재폐로 결정에 관한 연구 (A Study on Reclosing Decision on 154kV Combined Transmission Lines)

  • 정채균;박흥석;강지원;이종범
    • 전기학회논문지
    • /
    • 제59권10호
    • /
    • pp.1761-1769
    • /
    • 2010
  • This paper describes switching surge analysis on reclosing decision in 154kV combined transmission line with power cables. Reclosing should be operated in combined transmission line based on the technical evaluation because of insulation problem of power cable section. If the surge strikes on power cable, the breakdown can occur at week point of cable insulation. Therefore the detailed analysis is required by considering several conditions such as length ratio of power cable, arrester, fault resistance, charging rate and grounding resistance, etc.. In addition, sheath voltage on IJ(Insulated Joint) is analyzed to confirm the protective level. Simulation is performed by EMTP/ATP. Analysis results show that reclosing can be operated without any special problem by the single line-to-ground fault with fault resistance of $1\Omega$ to $50\Omega$ occurred at the overhead transmission section in 154kV combined transmission lines and trap charge of 100% and 110%.