• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05b
• /
• pp.139-146
• /
• 1997

Zircaloy-4의 수증기 산화와 이에 따른 수소침투의 압력에 대한 영향을 평가하기 위해 pre-transition과 post-transition의 영역에서 1~103 기압의 압력 범위에서 실험을 수행하였다. 그리고 시편의 edge부분에서의 산화율 및 수소침투 가속화 현상을 알아보기 위해 시편의 edge 분율에 따른 산화율 및 수소침투량 실험을 압력영향과 함께 수행하였다. 또 steam corrosion과 waterside corrosion의 비교를 위해 산화율에 따른 수소침투를 평가하였다. 잠정적인 결과로서 pre-transition 영역, 즉, 37$0^{\circ}C$, 72시간에서 103기압에서의 산화가 1 기압에서의 산화보다 약 50% 증가된 값을 가졌고,post-transition 영역, 즉, $700^{\circ}C$, 210분에서는 최고 150%의 산화 가속화를 관찰할 수 있었으며 수소 침투량 역시 산화가 가속화된 만큼 증가하였다. 그리고 압력이 증가함에 따라 산화율이 점진적으로 증가함을 pre-transition영역과 post-transition영역에서 관찰할 수 있었다. 시편의 edge 분율에 따른 산화율의 변화에 대해서는 37$0^{\circ}C$, 72시간의 경우 산화량이 적어 별다른 영향을 관찰할 수 없었으나, $700^{\circ}C$, 210분에서는 시편의 표면적에 대한 edge의 비율이 증가할수록 산화율이 증가하고 있음을 볼 수 있다. 하지만 기존의 논문들에서 주장하고 있는 뚜렷한 edge의 영향을 관측하기는 어려웠다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.10
• /
• pp.943-949
• /
• 2008

We report on the development of transition edge sensors for x-ray detection. The sensor technology was based on the fabrication of a superconducting film on a thin membrane. A bilayer of a superconductor, Ti, and a noble metal, Au, was e-beam evaporated on a micromachined SiNx. Another Au layer was evaporated on the two side edges of the bilayer in order not to be affected by structural imperfections at the boundaries. With the method described in the present report, the superconducting transition temperature of the device was consistently achieved to near 80 mK with a sharp transition. The energy spectrum ueasured with the device provided 37 eV FWHM for 5.9 x-rays. We also discuss the design and fabrication considerations as well as the performance of the device in detail.

• 한국초전도학회:학술대회논문집
• /
• 2008.08a
• /
• pp.10-10
• /
• 2008

• Journal of the Korean Ceramic Society
• /
• v.31 no.2
• /
• pp.201-205
• /
• 1994

Glasses being prepared, measurements and investigations of glass transition temperature and IR edge optical absorption have been performed for the compositions of 56ZrF4-14BaF2-6LaF3-4AlF3-(20-x)NaF-xLiF. Values for transition temperature of these glasses decrease in proportion to increasing LiF mol%(x) in the range of 0

• Bulletin of the Korean Chemical Society
• /
• v.18 no.7
• /
• pp.743-749
• /
• 1997

Local structure refinement of the BaFe1-xSnxO3-y system (x=0.00-0.50) has been carried out with Fe K-edge x-ray absorpion spectroscopic studies. It is found out that the Fe ions are placed in two different symmetric sites such as tetrahedral and octahedral sites in the compounds by comparison with Fe K-edge x-ray absorption near edge structure (XANES) spectrum of the γ-Fe2O3 compound as a reference. Small absorption peaks of dipole-forbiden transitions appear at a pre-edge region of 7111 eV due to the existence of Fe ions in the tetrahedral and octahedral sites. The peak intensity decreases with the substitution amount of Sn ion. Three different absorption peaks of 1s→4p dipole-allowed transition appear on the energy region between 7123 and 7131 eV. The peaks correspond to 1s→4p main transition of Fe ions in tetrahedral and octahedral sites and 1s→4p transition followed by the shakedown process of ligand to metal charge transfer. The bond distances between Fe ions in the tetrahedral site and nearest neighboring oxygen atom (Fe-4O), and those in octahedral site (Fe-6O) are determined with the extended x-ray absorption fine structure (EXAFS) analysis. Two different interatomic distances increase with the substitution amount of Sn ion and also the bond lengths of Fe-4O are shorter than those of Fe-6O in all compounds.

• Journal of Sensor Science and Technology
• /
• v.29 no.3
• /
• pp.180-186
• /
• 2020

In this study, we applied edge-pulse modulation to prevent the flicker of light-emitting diode (LED) light in a visible light identification system. In the visible light transmitter, positive pulses were transmitted at the edges of the low-to-high transition points, and negative pulses were transmitted at the edges of the high-to-low transition points of the non-return-to-zero (NRZ) data waveforms. In the visible light receiver, the NRZ waveforms were regenerated by making low-to-high and high-to-low transitions at the point of the positive and negative pulses, respectively. This method has two advantages. First, it ensures that the LED light is flicker-free because the average optical power of the LED was kept constant during data transmission in the transmitter. Second, the 120 Hz optical noise from the adjacent lighting lamps was easily cut off using a simple RC-high pass filter in the receiver.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.551-554
• /
• 2003

A novel geometric solution for uniform bend transition in a pi cell has proposed. In order to obtain the uniform bend transition, we applied hybrid domain structure to the edge of a LC cell by using ion-beam alignment method. As a result, we confirmed that the uniform bend transition has arisen from the edge to the center. From the proposed structure, we expect that the reliable and uniform bend transition can be achieved in the pi cell.

• Industrial Engineering and Management Systems
• /
• v.10 no.4
• /
• pp.238-246
• /
• 2011

Given a directed graph, we can determine how the user's preference moves from one product item to another. In this graph called "preference transition network", each node represents the product item while its edge pointing to the other nodes represents the transition of user's preference. However, with the large number of items make the network become more complex, unclear and difficult to be interpreted. In order to address this problem, this paper proposes a visualization technique in preference transition analysis based on recency and frequency. By adapting these two elements, the semantic meaning of each item and its transition can be clearly identified by its different types of node size, color and edge style. The experiment in a sales data has shown the results of the proposed approach.

• Journal of the Korean Society of Combustion
• /
• v.9 no.2
• /
• pp.18-29
• /
• 2004

Partial quenching structure of diffusion flames in a turbulent mixing layer has been investigated by the method of flame hole dynamics in oder to develope a prediction model for the phenomenon of turbulent flame lift off. The present study is specifically aimed to remedy the shortcoming of the stiff transition of the conditioned partial burning probability across the crossover condition by employing the level-set method which enables us to include the effect of finite flame edge propagation speed. In light of the level-set simulation results with two models for the edge propagation speed, the stabilizing conditions for turbulent lifted flame are suggested. The flame hole dynamics combined with the level-set method yields a temporally evolving turbulent extinction process and its partial quenching characteristics is compared with the results of the previous model employing the flame-hole random walk mapping based on three critical scalar dissipation rates. The probability to encounter reacting state, conditioned with scalar dissipation rate, demonstrated that the conditional probability has a rather gradual transition across the crossover scalar dissipation rate. Such a smooth transition is attributed to the finite response of the flame edge propagation.

• Progress in Superconductivity
• /
• v.9 no.2
• /
• pp.162-166
• /
• 2008

We are developing a sensitive gamma ray spectrometer based on superconducting transition edge sensors. The detector consists of a small piece of high purity Sn as an absorber and a Ti/Au bilayer as a temperature sensor. It is designed to measure the thermal signal caused by absorption of gamma rays. The mechanical support and the thermal contact between the absorber and the thermometer were made with Stycast epoxy. The bilayer was formed by e-beam evaporation and patterned by wet etching on top of a $SiN_X$ membrane. A sharp superconducting transition of the film was measured near 100 mK. When the film was biased to the edge of the transition, signals were observed due to single photon absorption emitted from an $^{241}Am$ source. The measured spectrum showed several characteristic peaks of the source including 59.5 keV gamma line. The full with at half maximum was about 900 eV for the 59.5 keV gamma line. The background was low enough to resolve low energy lines. Considerations to improve the energy resolution of the gamma ray spectrometer are also discussed.