• Journal of Electrochemical Science and Technology
• /
• 제15권2호
• /
• pp.207-219
• /
• 2024

Metal-N-C (MNC) catalysts have been anticipated as promising candidates for oxygen reduction reaction (ORR) to achieve low-cost polymer electrolyte membrane fuel cells. The structure of the M-N_x moiety enabled a high catalytic activity that was not observed in previously reported transition metal nanoparticle-based catalysts. Despite progress in non-precious metal catalysts, the low density of active sites of MNCs, which resulted in lower single-cell performance than Pt/C, needs to be resolved for practical application. This review focused on the recent studies and methodologies aimed to overcome these limitations and develop an inexpensive catalyst with excellent activity and durability in an alkaline environment. It included the possibility of non-precious metals as active materials for ORR catalysts, starting from Co phthalocyanine as ORR catalyst and the development of methodologies (e.g., metal-coordinated N-containing polymers, metal-organic frameworks) to form active sites, M-N_x moieties. Thereafter, the motivation, procedures, and progress of the latest research on the design of catalyst morphology for improved mass transport ability and active site engineering that allowed the promoted ORR kinetics were discussed.

• Bulletin of the Korean Chemical Society
• /
• 제19권12호
• /
• pp.1310-1314
• /
• 1998

The oligo(methylsilene) (1) was treated with the group 4 metallocene Cp2MCl2/Red-Al (M = Ti, Zr, Hf) combination catalysts and with the group 6 metal carbonyl M(CO)6 (M = Cr, W) catalysts, producing the modified, cross-linked polymers. The average molecular weights and percent ceramic residue yields of modified polymers increase as the catalyst goes down from Ti to Hf and similarly as the catalyst goes down from Cr to W. An interrelationship between average molecular weights and percent ceramic residue yield is found within the respective group of catalysts, but is not observed as the catalyst goes down from Ti to W. The polymers modified with the group 4 metallocene combination catalysts have higher molecular weights and similar percent ceramic residue yields as compared to the polymers modified with the group 6 metal carbonyl catalysts. The catalytic activities of group 4 metallocene combinations appear to be higher -100 ℃, but to be lower at very high temperature than those of group 6 metal carbonyls.

• 한국대기환경학회지
• /
• 제30권6호
• /
• pp.577-585
• /
• 2014

A series of experiments using atmospheric-pressure non-thermal plasma coupled with transition metal catalysts were performed to remove ethylene from agricultural storage facilities. The non-thermal plasma was created by dielectric barrier discharge, which was in direct contact with the catalyst pellets. The transition metals such as Ag and $V_2O_5$ were supported on ${\gamma}-Al_2O_3$. The effect of catalyst type, specific input energy (SIE) and oxygen content on the removal of ethylene was examined to understand the behavior of the hybrid plasma-catalytic reactor system. With the other parameters kept constant, the plasma-catalytic activity for the removal of ethylene was in order of $V_2O_5/{\gamma}-Al_2O_3$ > $Ag/{\gamma}-Al_2O_3$ > ${\gamma}-Al_2O_3$ from high to low. Interestingly, the rate of plasma-catalytic ozone generation was in order of $V_2O_5/{\gamma}-Al_2O_3$ > ${\gamma}-Al_2O_3$ > $Ag/{\gamma}-Al_2O_3$, implying that the catalyst activation mechanisms by plasma are different for different catalysts. The results obtained by varying the oxygen content indicated that nitrogen-derived reactive species dominated the removal of ethylene under oxygen-lean condition, while ozone and oxygen atoms were mainly involved in the removal under oxygen-rich condition. When the plasma was coupled with $V_2O_5/{\gamma}-Al_2O_3$, nearly complete removal of ethylene was achieved at oxygen contents higher than 5% by volume (inlet ethylene: 250 ppm; gas flow rate: $1.0Lmin^{-1}$; SIE: ${\sim}355JL^{-1}$).

• 진공이야기
• /
• 제3권1호
• /
• pp.4-8
• /
• 2016

Motivated by two dimensional graphene, layered transition metal dichalcogenides (TMDs) have attracted scientific interests by their diverse electronic, optical and catalytic properties. In particular, group 6 TMDs such as $MoS_2$ and $MoTe_2$ have polymorphs (with metallic octahedral and semiconducting hexagonal phases) which are not present in graphene. Here, we introduce a new concept in 2D materials' studies, structural phase transition, with group 6 TMDs and its current research trend and applications for electric device and electrochemical catalyst.

• Macromolecular Research
• /
• 제9권2호
• /
• pp.71-83
• /
• 2001

The metallocene compounds had been applied to the polymerizations of olefins and vinyl monomers with methylaluminoxane (MAO) cocatalyst, and they have usually one transition metal atom per molecule, i.e., mononuclear metallocene. Recently it has been found that the dinuclear metallocene compounds containing two transition metal atoms exhibit the peculiar polymerization behaviors for olefins and vinyl monomers. In this article, the dinuclear metallocenes are classified into four groups of dinuclear bent-metallocene, dinuclear ansa-metallocene, dinuclear constrained geometry catalyst and dinuclear half-metallocene, and then the synthesis of dinuclear metallocene of each group as well as the polymerization behaviors for ethylene, propylene, and styrene are described.

• 한국환경과학회지
• /
• 제22권8호
• /
• pp.945-951
• /
• 2013

Alumina-supported catalysts containing different transition metals such as Cu, Cr, Mn, Zn, Co, W were investigated for their activity in the selective oxidation of toluene. Catalytic oxidation of toluene was investigated at atmospheric pressure in a fixed bed flow reactor system over transition metals with $Al_2O_3$ catalyst. The result showed the order of catalytic activities for the complete oxidation of toluene was Mn > Cu> Cr> Co> W> Zn for 5wt.% transition $metals/Al_2O_3$. $Mn/Al_2O_3$ catalysts containing different amount of Mn were characterized by X-ray diffraction spectroscopy for decision of loading amount of metal to alumina. 5 wt.%$Mn/Al_2O_3$ catalyst exhibits the highest catalytic activity, over which the toluene conversion was up to 90% at a temperature of $289^{\circ}C$.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.77-80
• /
• 2007

To increase the capacity of hydrogen adsorption, transition metals were adopted as catalyst. The PAN-based CNFs involving transition metal were obtained by electrospinning method and heat treatment. To study the surface of carbon fibers, SEM analysis was conducted. The mass of transition metals were spreaded or covered among CNFs. XRD and EDX analysis were used to confirm transition metals on the surface of carbon fibers. Volumetric method was used for studying the capacity of hydrogen adsorption on the carbon fibers involving transition metals. In this study. vanadium has the best characteristics among chromium, titanium, and copper for hydrogen adsorption.

• 한국수소및신에너지학회논문집
• /
• 제34권6호
• /
• pp.587-593
• /
• 2023

This research project focused on the production of hydrogen through ammonia decomposition reactions while investigating how the reactivity of this process varies when employing different catalysts. Several metal oxide supports (Al₂O₃, La₂O₃, CeO₂) were utilized as catalysts, with active metals from both the transition metal group (Co, Ni, Fe, Cr, Cu) and the noble metal group (Ru, Rh, Pd, Pt) impregnated onto these supports. Furthermore, the study examined how the reactivity evolves with changes in reaction temperature when employing the prepared catalysts. Additionally, the research delved into the distinctive activation energies associated with each of the catalysts. In this research, In the noble metal catalyst system, the order of high activity for ammonia decomposition reaction to produce hydrogen is Ru > Rh > Pt ≈ Pd. In the transition metal catalyst system, the order of high activity is Co > Ni > Fe > Cr > Cu.

• 한국수소및신에너지학회논문집
• /
• 제14권1호
• /
• pp.69-80
• /
• 2003

Nickel catalyst has been used for natural gas reforming with carbon dioxide, In this study, catalyst support used was HY zeolite. The optimum loading of Ni in the catalysts was 13 wt%. The effect of promoters, such as Mg, Mn, and K, was also studied. The addition of promoters to Ni catalyst improved the stability of catalysts and carbon deposition on Ni catalyst was suppressed. The reforming reactivity of promoter-added Ni catalyst was higher than that of Ni catalyst without any promoters. SEM, XRD, BET, TGA and FTIR tests were tried to characterize the catalyst structure before and after reaction.

• Bulletin of the Korean Chemical Society
• /
• 제22권1호
• /
• pp.117-119
• /
• 2001