• Journal of Korean Medical classics
• /
• v.22 no.4
• /
• pp.261-264
• /
• 2009

Gi(氣) transformation theory is the foundation of Traditional Chinese Medicine[TCM]. This theory matured during the period of "Hwangjenaegyeong(黃帝內經)", and later in the history of TCM was a source of significant impact on the development process and direction of general medical theory. The concept of "gi transformation[氣化]" mainly originates from the definition of the three levels which are nature, the relationship between nature and human, and the body's own metabolism, and is used to describe the usage and the resulting changes of 'gi(氣)'. Gi transformation possesses six characteristics which are permanence, universality, representationalism, directional, variability, and orderliness. The research of the concept and characteristics of gi transformation[氣化] in "Hwangjenaegyeong" will help identify the important academic value and practical significance of the formation of the basic theory of TCM as the result of the gi transformation theory, and highlight the unique characteristics of TCM.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2000.04a
• /
• pp.196-201
• /
• 2000

A thermodynamic model was developed to analyze the characteristics of the heat generation during transformation of austenite in 0.186wt% and 0.458 wt%. carbon steels. The heat capacity and the heat evolved during transformation were formulated as functions of temperature and chemical composition for ferrite bainite and pearlite. in addition using the transformation dilatometer the transformation heat evolved during cooling was measured and the transformation behavior was observed. It was found that the heat capacity of ferrite was similar to those of pearlite and bainite. The heat capacity of ferrite was greater than that of bainite which was greater than that of pearlite. The molar heat of transformation to pearlite was greater than that to bainite which was greater than that to ferrite. The heats were found to be increased with decreased temperature and increasing the carbon content, It was also observed that the thermodynamic model. The heat of transformation in the higher carbon steel was greater than that in the lower carbon one. This was attributed to the lower transformation temperature and the greater amount of transformed pearlite in the higher carbon steel.

• Journal of Korea Port Economic Association
• /
• v.39 no.3
• /
• pp.155-178
• /
• 2023

The purpose of this study is to derive factors that affect the acceptance of digital transformation in ports and empirically analyze the impact of these factors on the acceptance of digital transformation through a survey of port workers. Additionally, we test whether acceptance attitude plays a mediating role in the relationship between these factors and digital transformation acceptance. The variables used in this study are as follows. First, knowledge, self-efficacy, and involvement were included as variables related to individual characteristics, relative advantages, complexity, observability were included as variables related to innovation characteristics, and government regulations and competitor pressure were included as variables relate to environmental characteristics, so that a total of eight latent variables were selected. The results of this study are summarized as follows. First, two variables among individual characteristics, self-efficacy and involvement, were able to confirm a positive(+) causal relationship with the attitude of accepting digital transformation, and knowledge initially expected a positive(+) causal relationship with the attitude of accepting digital transformation, but the result was a negative(-) causal relationship, so that the hypothesis was rejected. Second, among the characteristics of innovation, complexity has a negative(-) causal relationship with the attitude of accepting digital transformation, and relative advantages and technological innovation have a positive(+) causal relationship with the attitude of accepting digital transformation. Finally, among the environmental characteristics, government regulations and competitor pressure, confirmed a positive(+) causal relationship with the attitude of accepting digital transformation. In addition, it was found that the attitude of accepting digital transformation had a positive(+) causal relationship with personal acceptance and social acceptance of digital transformation.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.1 s.149
• /
• pp.167-175
• /
• 2006

The purpose of this study is to clarify the expansion of functions of clothes by analyzing the characteristics of transformation, and to forecast future trends in fashion through systematization of the aforementioned analyses. Analysis of 20th century Modernism and Post-Modernism in a sociocultural sense confirms that transformation in clothes was formed by environmental, functional, deconstructive, and expressive factors. In this sense, the formative factors mentioned above conceptually include nomadic characteristics, usefulness, irregularity, and expressiveness. The nomadic characteristics found in clothes transformation signify the change of clothes into environmental nomadic everyday implements, used as tools for the body. Usefulness of clothes means that it is worn for variability, multipurpose multi-functionality, and combined multiple use. Irregularity means the clothes can change indefinitely, according to random manipulation on the wearer's part. Last of all, expressiveness conveys the designer's internal sensitivity and imagination onto an external object through the induction of various expressive factors.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.10
• /
• pp.52-59
• /
• 2002

The thermo-mechanical characteristics of high temperature NITINOL shape memory alloy were evaluated using DSC with small samples and DMA with three-point bending specimens. The shape memory alloy of 54.4Ni/45.5Ti wt.% was used so that the phase transformation temperatures were in the range of 50~11$0^{\circ}C$. Two types of sample were tested in the experiments corresponding to as-received and annealed conditions. Simple beam bending theory was used to calculate the dynamic moduli of the shape memory alloy. According to the results, a large discrepancy in transformation temperatures was found between DSC and DMA techniques. Annealing treatment was found to suppress the R-phase transformation during cooling and the secondary plateau in the austenite transformation. Such a heat treatment was also significantly influenced to raise the transformation temperatures and the moduli of the shape memory alloy.

• Journal of Korea Foundry Society
• /
• v.29 no.5
• /
• pp.187-191
• /
• 2009

Microstructures and shape memory characteristics of $Ti_{50}Ni_{20}Cu_{30}$ alloy strips fabricated by arc melt overflow have been investigated by means of XRD, optical microscopy and DSC. The microstructure of as-cast strips exhibited columnar grains normal to the strip surface. X-ray diffraction analysis showed that one-step martensitic transformation of B2-B19 occurred in the alloy strips. According to the DSC analysis, it was known that the martensitic transformation temperature ($M_s$) of B2 $\rightarrow$ B19 in $Ti_{50}Ni_{20}Cu_{30}$ strip is $57^{\circ}C$. During thermal cyclic deformation with the applied stress of 60 MPa, transformation hysteresis and elongation associated with the B2-B19 transformation were observed to be $3.7^{\circ}C$ and 1.6%, respectively. The as-cast strip of $Ti_{50}Ni_{20}Cu_{30}$ alloy also showed a superelasticity and its stress hysteresis was as small as 14 MPa. These mechanical properties and shape memory characteristics of the alloy strips were ascribed to B2-B19 transformation and the controlled microstructures produced by rapid solidification of the arc melt overflow process.

• Journal of Korean Society for Quality Management
• /
• v.50 no.1
• /
• pp.35-42
• /
• 2022

Purpose: The purpose of this study is to examine the characteristics and problems of existing research through various literature investigations on the existing R&D process. Implications are identified through the investigation of existing studies and the characteristics of the digital transformation era are analyzed. We research and propose a new R&D process suitable for the new era of digital transformation. Methods: The research method investigates various literature precedent studies on the existing R&D process and the methods used by companies. Research new R&D processes that reflect the characteristics of the digital transformation era and develop new related models. Results: In the era of digital transformation, the parallel R&D process is being reorganized to respond quickly to the demands of rapid market changes. In order to respond quickly to various customers, the R&D process can respond flexibly in a parallel structure. Conclusion: Along with the development of the R&D process, additional research on indicators and evaluation models that can evaluate them fairly and flexibly is needed. Further research is needed to determine whether the R&D process suitable for the digital transformation era is operating properly.

• The Journal of Economics, Marketing and Management
• /
• v.12 no.4
• /
• pp.65-76
• /
• 2024

Purpose: This study aims to identify the relationship between SMEs' digital transformation capabilities, smart factory utilization, and management performance. It also aims to suggest how companies strategically utilize smart factories to achieve a competitive advantage and sustainable growth through empirical analysis of differences in innovation resistance and organizational characteristics. Research design, data, and methodology: This study Implement for SME's building smart factories did. The survey was conducted for 90days from October 1st, 2023 to December 31th, 2023. Total of 210 surveys were collected, and 186 surveys, excluding ones with missing value and outliers (64 surveys), were used. Results: The results of the empirical analysis based on previous research are as follows. First, digital transformation capabilities such as digital technology, digital leadership, and digital strategy affect smart factory utilization. Second, smart factory use affects operational performance. Third, innovation resistance has a moderating effect in the relationship with digital transformation capabilities, smart factory utilization, and management performance. Fourth, organizational characteristics have a moderating effect in the relationship with digital transformation capabilities, smart factory utilization, and management performance. Conclusions: Explore strategic ways to improve your organization's digital transformation capabilities. It is necessary to establish a strategy to make organizational members aware of the necessity and importance of introducing a new system through centralization of the organization.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.683-686
• /
• 2001

The thermomechanical characteristics of NITINOL shape memory alloy were evaluated using DSC with small samples and DMA with three-point bending specimens. The shape memory alloy of 54.4Ni/45.5Ti wt.% was used so that the austenite finish temperature was in the range of $50~100^{\circ}C$. Two types of sample were tested in the experiments corresponding to as-received and annealed conditions. Simple beam bending theory was used to calculate the dynamic moduli of the shape memory alloy. According to the results, a large discrepancy in transformation temperatures was found between DSC and DMA techniques. Annealing treatment was found to suppress the R-phase transformation during cooling and the secondary plateau in the austenite transformation. Such a heat treatment was also significantly influenced to raise the transformation temperatures and the moduli of the shape memory alloy.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.8
• /
• pp.4693-4697
• /
• 2013

Background: Malignant transformation arising in mature cystic teratoma (MCT) is one of the most serious complications of MCT. Squamous cell carcinoma is the most common malignant change. Some clinical findings such as advanced age group and large tumor size are significant risk factors of malignant transformation. This study was conducted in order to evaluate characteristics, cell types, treatment and outcome of malignant transformation arising from dermoid cysts in our institution. Materials and Methods: A retrospective chart review was performed. General characteristics, operative data, procedure, operative finding and operative outcome were analyzed. Statistical assessment was performed with SPSS version 17.0, using mean, mode, median and percentage to describe those data. Results: During the 10 years period, 11 cases of malignant transformation from a total of 753 cases (1.46% incidence) of MCT were reviewed. Mean age of the patients was 41.2 years (SD 4.34, range 24-70). The most common presenting symptom was a palpable mass (8 cases; 72.7%). Primary surgical staging was performed in 4 patients (36.4%). Re-staging was conducted in the other 4. Complete cytoreduction was obtained in 45.5% (5 cases) and optimal surgical resection was obtained in 36.4% (4 cases). Mean tumor size was 14.1 cm. (SD 1.55, range 6-20). Squamous cell carcinoma was found in 36.4% (4 cases) and mucinous cancer in the other 4. More than half of them were stage Ia (54.5%, 6 cases). All patients whose stage more than Ia received chemotherapy (45.5%). Mean disease free survival was 5.53 years (1.32, 0.3-10). Conclusion: According to our study, the incidence of malignant transformation was consistent with previous studies. The common malignant transformation histologic types are both squamous and mucinous carcinoma which differed from previous reports. Early detection for early stage disease and optimal surgery are important for long term survival.