• 제목/요약/키워드: transfer product

검색결과 562건 처리시간 0.03초

미성숙 돼지 정소에서 pregnancy-associated plasma protein-A의 발현의 세포학적 분석 (Cytological analysis of pregnancy-associated plasma protein-A expression in porcine neonatal testis)

  • 김지윤;오건봉;변승준;옥선아;이휘철;황성수;박상현;하우태;우제석;송혁
    • 한국수정란이식학회지
    • /
    • 제33권3호
    • /
    • pp.177-183
    • /
    • 2018
  • 생체 조직 내에서 표지인자의 발견은 해당 세포의 특성과 기능을 이해하는 데 매우 중요하다. 이전의 연구에서 본 연구진은 돼지정원줄기세포에서 특이적으로 IGFBP 3가 발현되어 표지인자로의 가능성을 보고한 바 있다. 본 연구에서는 IGFBP 3이외의 다른 family member가 정원줄기세포에서 특이적으로 발현하는 지와, 이의 발현을 조절하는 PAPP-A의 조직학적인 측면에서의 발현 양상을 5일령 돼지 정소에서 확인하였다. 그 결과 IGFBP 1, 2, 3, 4, 6의 발현은 정소 전체에서 발현되는 수준보다 돼지 정원줄기세포에서 더 높은 수준에서 발현하고 있음을 확인하였다. PAPP-A는 sertoli cell에서 특이적으로 발현하며, 정원줄기세포에서는 발현하지 않는 것을 PGP9.5와의 동시-조직염색으로 확인하였다. 이러한 결과는 Sertoli cell에서 발현하는 PAPP-A 단백질은 미성숙 돼지 정소에서 IGFBP family를 통해 정소 세포의 발달과 분화를 조절할 것으로 판단된다.

방수 커넥터용 LSR Seal의 균일 경화를 위한 사출 금형 히터의 최적 설계 (Optimum design of injection mold heater for uniform curing of LSR seal for waterproof connector)

  • 송민재;차백순;홍석관;고영배
    • 한국산학기술학회논문지
    • /
    • 제18권7호
    • /
    • pp.310-315
    • /
    • 2017
  • 자동차용 방수커넥터는 외부로부터 방수가 필요한 전장부품인 와이어 하네스(Wire Harness)에 연결되어 있는 핵심기능부품이며 특히 와이어씰(Wire Seal) 부품은 고온, 다습, 저온, 먼지, 약품 등의 복합적 환경에서도 체결부 기밀성이 확보되어야 한다. 이러한 와이어씰은 최근 기존의 고상실리콘고무(Heat Cure Rubber)대신 친환경 소재이며 기계적 특성이 우수한 액상실리콘고무(LSR)를 적용하고 있다. 그리고 LSR용 와이어씰을 액상사출성형(Liquid Injection Molding)공정으로 제조할 경우 고상실리콘고무를 제조 하긴 위한 압축성형방식에 비해 사이클타임이 10배이상 빠르고 스크랩이 발생하지 않아 재료의 손실이 없으며 가류 및 생산을 위한 전후처리 과정이 필요 없기 때문에 원가 절감효과가 큰 이점이 있다. 하지만, 방수커넥터를 제조하기 위한 LSR 다캐비티 사출성형공정에서는 일정한 품질의 제품을 확보하기 위하여 캐비티간 균일한 경화온도를 유지하는 것이 중요하다. 본 연구에서는 캐비티간 온도 편차를 최소화 하기 위하여 카트리지 히터의 용량을 위치마다 다르게 설계한 후 열전달 해석과 최적화 모듈을 연계하여 최적의 카트리지 히터 용량을 빠르고 효율적으로 도출하였다. 최적화 해석결과 일정한 히터 용량을 적용한 경우에 비하여 캐비티간 온도 편차는 $13.1^{\circ}C$에서 $8.1^{\circ}C$로 감소 시켜 균일 경화를 위한 온도 편차 $10^{\circ}C$ 이내인 설계 기준을 만족시킬 수 있었다.

Acetobacter aceti균의 심부배양에 의한 초산발효의 동력학적 연구 (Kinetic Studies on Submerged Acetic Acid Fermentation of Acetobacter aceti)

  • 김상식;이근태
    • 한국수산과학회지
    • /
    • 제25권4호
    • /
    • pp.301-306
    • /
    • 1992
  • 초산발효능이 강하고 강호기성균인 Acetobacter aceti균의 초산발효에 있어서 교반과 통기속도를 달리했을 때의 발효에 미치는 경향을 요약하면 다음과 같다. 1) 교반 및 통기를 달리했을 때에 균의 증식, 산생성 및 기질소비는 상당한 차이가 있었으며 배양 48시간에 균체는 정체기에 도달하였다. 2) Acetobacter aceti균의 산 발효경향은 증식관 연형이었다. 3) 통기속도는 1v/v/M일 때, 교반속도 700, 500 및 300rpm에서의 최대비증식원도는 각각 $3.97\times10^{-2},\;3.82\times10^{-2}$$2.04\times10^{-2}\;hr^{-1}$이었으며, saturation constant(Ks)는 61.4, 64.6 및 69.4mg/ml, 그리고 효소이동용량계수는 각각 0.9337, 0.4468 및 $0.1701min^{-1}$이었다. 4) 교반속도 500rpm일 때, 통기속도 1.25, 1.00 및 0.75v/v/M에서의 최대비증식속도는 각각 $3.90\times10^{-2},\;3.82\times10^{-2}$$2.37\times10^{-2}\;hr{-1}$ saturation constant(Ks)는 63.4, 64.6 및 64.9mg/ml, 산소이동용량계수는 각각 0.4923, 0.4468 및$0.3509min^{-1}$다.

  • PDF

U.S. Forest Service Research : Its Administration and Management

  • Krugman, Stanley L.
    • 한국산림과학회지
    • /
    • 제76권3호
    • /
    • pp.243-248
    • /
    • 1987
  • The U.S. Forest Service administers the world's largest forestry research organization. From its modest beginning in 1876, some 30 years before the United States national forest system was established, the research branch has devoted its effort to meet current and future information needs of the forestry community of the United States, not just for the U.S. Forest Service. The research branch is one of three major administrative units of the U.S. Forest Service. The others being the National Forest System and State and Private Forestry. Currently the National Forest System comprises 155 national forests, 19 national grasslands, and 18 utilization projects located in 44 states. Puerto Rico, and the Virgin Islands. The National Forest System manages these areas for a large array of uses and benefits including timber, water, forage, wildlife, recreation, minerals, and wilderness. It is through the State and Private Forestry branch that the U.S. Forest Service cooperates and coordinates forestry activities and programs with state and local governments, forest industries, and private landowners. These activities include financial and technical assistance in disease, insect, and fire protection ; plan forestry programs ; improve harvesting and marketing practices ; and transfer forestry research results to user groups. Forestry research is carried out through eight regional Forest Experiment Stations and the Forest Product Laboratory. Studies are maintained at 70 administrative sites, and at 115 experimental forest and grasslands. All of the current sciences that composed modern forestry are included in the research program. These range from forest biology (i. e. silviculture, ecology, physiology, and genetics) to the physical, mathematical, engineering, managerial, and social sciences. The levels of research range from application, developmental, and basic research. Research planning and priority identification is an ongoing process with elements of the research program changing to meet short-term critical information needs(i. e. protection research) to long-term opportunities(i. e. biotechnology). Research planning and priority setting is done in cooperation with National Forest Systems, forest industries, universities, and individual groups such as environmental, wilderness, or wildlife organizations. There is an ongoing review process of research administration, organization, and science content to maintain quality of research. In the U.S. Forest Service the research responsibility is not completed until the new information is being applied by the various user group : I. e. technology transfer program. Research planning and development in the U.S. Forest Service is a dynamic activity. Porgrams for the year 2000 and beyond are now in the planning stage.

  • PDF

경화제의 분자량에 의한 가교밀도 차이에 따른 복합재료의 계면 물성 및 RTM 성형성에 미치는 영향 (The Effect of Interfacial Properties and RTM Process of Composites with Different Cross-linking Density by Molecular Weight of Hardener)

  • 박하승;신평수;김종현;백영민;권동준;박종만
    • Composites Research
    • /
    • 제30권3호
    • /
    • pp.169-174
    • /
    • 2017
  • 유리섬유(GF) 강화 복합재료는 금속에 비해 경량화의 장점으로 인해 기체 부품 산업의 높은 성장률과 방산 산업의 발전으로 수요는 증가되고 있으며 제품의 형태를 다양하게 제작할 수 있는 RTM 공정으로 산업적으로 이용되고 있다. 본 연구에서는 경화제의 분자량에 의한 가교 밀도 차이에 따라 변화되는 RTM의 성형성과 복합재료의 기계적 물성 및 계면 물성의 차이를 관찰하고자 하였다. 이를 위해 동일한 에폭시를 사용하였으며 유사한 화학 구조의 경화제를 이용하였다. 시편은 RTM 공법으로 제작하였으며 기지의 특성을 알아보기 위해 점도 측정 및 기지 주입시간을 측정하였다. 유리 섬유/에폭시 복합재료의 기계적 물성을 실험하여 굴곡 강도를 측정하였으며 계면 물성을 평가하기 위해 층간전단강도(ILSS)와 계면전단강도(IFSS)를 측정하였다. RTM 공정 시 기지의 점도에 의해 섬유의 함침정도에 따라 복합재료의 섬유 무게 분율(wt %)은 변화되고 이에 따라 유리섬유/에폭시 복합재료의 기계적 물성의 차이가 확인되었다.

화학적 등급화기법을 적용한 농공단지 입주제한업종의 환경유해성 평가 (The Environmental Hazard Assessment of Siting Restricted Industries from Industrial Complex in Rural Area Applied by Chemical Ranking and Scoring System)

  • 홍상표
    • 환경영향평가
    • /
    • 제24권6호
    • /
    • pp.549-560
    • /
    • 2015
  • 농공단지에 입주제한된 31개 업종의 업종별 배출특성에 따른 화학적 유해성을 근거로 업종별 환경영향을 계량화하여 입지규제 우선순위을 도출하였다. 농공단지에 입주제한된 31개 업종의 환경상의 악영향과 환경기술발전에 따른 환경유해성 저감을 동시에 고려한 합리적 토지이용 관리방안을 수립하기 위하여 업종별로 수계, 토양 및 대기의 매체별 배출량 및 배출물질 $LC_{50}$ 자료에 의해 산정된 인체위해성과 생태위해성을 노출평가와 독성평가로 분석하는 화학적 등급화기법(CRS : Chemical Ranking and Scoring System)에 PRTR (Pollutant Release and Transfer Registers) 자료를 활용하였다. 농공단지 폐수배출관련 31개 업종에 대한 환경유해성을 도출한 결과에 의하면 2012년 기준으로 도금 착색 및 기타 표면처리강재 제조업, 생물학적 제제 제조업, 동 제련정련 및 합금 제조업, 솜 및 실 염색가공업, 그외 기타 1차철강 제조업, 기타 비철금속 압연압출 및 연신제품 제조업 등 6개 업종은 환경영향 점수가 상대적으로 낮게 산출되어 제조공정상에서 특정수질유해물질을 배출허용기준 이하로 배출된다고 인정하는 경우에 농공단지 입주제한을 완화시킬 수 있는 업종으로 평가된다.

Aliquat 336 상이동 촉매하에서 디페닐메탄의 산화반응에 관한 속도론적 연구 (A Kinetic Study on the Oxidation of Diphenylmethane under Aliquat 336 Phase Transfer Catalyst)

  • 이화수;문정열;나석은;박대원
    • 공업화학
    • /
    • 제5권2호
    • /
    • pp.373-377
    • /
    • 1994
  • 본 연구는 Aliquat 336 상이동 촉매하에서 디페닐메탄을 산화시켜 벤조페논을 합성하는 반응의 메카니즘을 고찰한 것이다. 벤조페논의 생성속도는 Aliquat 336 촉매와 potassium tert-butoxide의 양이 많을수록 증가하였고, 반응의 부산물인 tert-butyl alcohol은 반응을 억제하였다 반응차수는 디페닐메탄과 산소의 농도가 낮을 때는 각각에 대하여 1차로 나타났고, 이들의 농도가 높을 때는 0차로 나타났다. 실험으로 측정한 벤조페논의 초기반응속도는 반응 메카니즘으로부터 유도한 다음의 반응 속도식과 비교적 잘 일치하였다. $$({\gamma}_{BP})_0={\frac{k_1k_3k_5[QCI]_0[DPM]_0[PTB]_0[O_2]_0}{k_2k_4[TBA]_0+k_2k_5[O_2]_0+k_3k_5[O_2]_0[DPM]_0}}$$

  • PDF

(C10H8N2H)2Cr2O7를 이용한 치환 벤질 알코올류의 산화반응과 반응속도에 관한 연구 (A Study for Kinetics and Oxidation Reaction of Substituted Benzyl Alcohols Using (C10H8N2H)2Cr2O7)

  • 박영조;김영식;김수종
    • 공업화학
    • /
    • 제28권5호
    • /
    • pp.597-600
    • /
    • 2017
  • 4,4'-비피리딘과 크롬(VI) 산화물을 반응시켜 $(C_{10}H_8N_2H)_2Cr_2O_7$을 합성하였다. 적외선분광광도법(FT-IR)과 원소분석으로 구조를 확인하였다. 여러 가지 용매 하에서 $(C_{10}H_8N_2H)_2Cr_2O_7$을 이용하여 벤질알코올의 산화반응을 측정한 결과, 용매의 유전상수 값이 증가함에 따라 반응수율이 증가했다. 그 순서는 DMF (N,N'-디메틸포름아미드) > 아세톤 > 클로로포름 > 시클로헥센이었다. $H_2SO_4$ 촉매를 이용한 DMF 용매 하에서, $(C_{10}-H_8N_2H)_2Cr_2O_7$은 벤질알코올(H)과 그의 유도체들($p-OCH_3$, $m-CH_3$, $m-OCH_3$, m-Cl, $m-NO_2$)을 효과적으로 산화시켰다. 전자받개 그룹들은 반응속도가 감소한 반면에 전자주개 치환체들은 반응속도를 증가시켰고, Hammett 반응상수(${\rho}$) 값은 -0.70 (308 K)이었다. 본 실험에서 알코올의 산화반응 과정은 속도결정단계에서 수소화 전이가 일어났다.

대기 중 질소산화물의 건식침적 특성 (Characteristics of Atmospheric Dry Deposition of Nitrogen-containing Compounds)

  • 이승묵;한영지;정장표
    • 대한환경공학회지
    • /
    • 제22권4호
    • /
    • pp.775-784
    • /
    • 2000
  • 본 연구는 그리스 대체표면을 사용한 건식침적판(knife-leading-edge surrogate surface)과 물표면 채취기(water surface sampler)를 이용하여 질산염(입자상, 가스상)의 전식침적량을 직접 측정하였다. 평균 가스상 건식침적량($8.3mg/m^2/day$) 이 입자상 건식침적량($3.0mg/m^2/day$)에 비해 훨씬 큰 값을 나타내었다. 직접 측정한 질산염의 가스상 건식침적량과 대기 중 질산($HNO_3$) 농도 사이의 선형회귀분석을 통하여 질산의 가스상 질량전달계수률 구하였다. 이와 같이 구한 질산의 질량전달계수는 이산화황($SO_2$)의 질량전달계수의 약 2배가 되는 값을 보여주었다. 특히, 오존주의보시에는 Graham의 확산법칙을 사용하여 이산화황의 질량전달계수로부터 계산한 질산의 질량전달계수와 대기 중 질산 농도와의 곱으로 추정된 질산염의 가스상 건식침적량에 비해, 측정된 건식침적량이 훨씬 높은 값을 나타내는 특이한 현상을 보였다. 이 결과는 질산 외의 가스상 화학종이 질소산화물의 가스상 건식침적량에 영향을 미친다는 사실을 나타내고 있다. 이론적인 계산결과에 의하면 아질산($HNO_2$) 과 PAN이 질소산화물의 가스상 건식침적량에 기여할 가능성이 높은 것으로 나타났다.

  • PDF

항만관련문제의 시스템적 고찰 부산항 물류시스템의 실태분석 (A Systematic Approach to Port related Problems An Analysis on the Actual Condition of physical Distribution System of Pusan port)

  • 이철영;문성혁
    • 한국항만학회지
    • /
    • 제2권1호
    • /
    • pp.7-28
    • /
    • 1988
  • From the viewpoint of physical distribution, the port transport process can be regarded as a system which consists of various subsystems such as navigational aids, quay handling, transfer, storage, information If management, and co-ordination with inland transport. The handling productivity of this system is determined by the production level of the least productive subsystem. So, a productivity analysis on the flow of cargoes through each subsystem should be made in order to achieve efficient port operation. The purpose of this paper is to analyze the productivity of each subsystem in Pusan port, and to bring forward problems and finally to draw up plans for their betterment. Analyzed results on the productivity of each subsystem are as follows, i) It is known that the number of tugs with low HP should be increased by a few, the number of tugs with medium HP is appropriate, and the number of tugs with high HP is in excess of that necessary. ii ) In the case of container cargoes, it is found that the transfer and storage systems in BCTOC have the lowest handling capability, with a rate of $115\%$, leading to bottle-necks in the port transport system, while the handling rate of the storage and quay handling systems in general piers is in excess of the inherent capability. iii) In the case of the principal seaborne cargoes passing through general piers, there is found to be a remarkable bottle-neck in the storage system. In the light of these findings, both the extension of storage capability and the extension of handling productivity are urgently required to meet the needs of port users. Therefore, iv) As a short-term plan, it is proposed that many measures such as the reduction of free time, the efficient application of ODCY, etc must be brought in and v) In the long-trun, even though the handling capability will accommodate an additional 960,000 TEU in 1991, the scheduled completion date of the third development plan of Pusan port, insufficiency of handling facilities in the container terminal is still expected and concrete countermeasures will ultimately have to be taken for the port's harmonious operation. In particular, the problem of co-ordination with inland transport and urban traffic should be seriously examined together in the establishment of the Pusan port development. As a method of solving this, vi) It is suggested that Pusan port (North port) should be converted into an exclusive container ternimal and overall distribution systems to the other ports for treating general cargoes must be established. vii) And finally, it is also proposed that the arrival time (cut-off time) of influx cargoes for exports such as general merchandise and steel product should be limited, with a view to securing cargoes suitable for the operational capability of BCTOC.

  • PDF