• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 1999년도 제13회 학술강연논문집
• /
• pp.33-33
• /
• 1999

The Coanda effect is the tendency for a fluid jet to atach itself to an adjacent surface and follow its contour without causing an appreciable flow separation. The jet is pulled onto the surface by the low pressure region which develops as entrainment pumps fluid from the region between the jet and the surface. Then the jet is held to the wall surface by the resulting radial pressure gradient which balance the inertial resistance of the jet to turning. The jet may attach to the surface and may be deflected through more than 180 dog, when the radius of the Coanda surface is sufficiently large compared to the height of the exhaust nozzle. However, if the radius of curvature is small, the jet turns through a smaller angle, or may not attach to the surface at all. In general, the limitations in size and weight of a device will limit the radius of the deflection surface. Thus much effort has been paid to improve the jet deflection in a variety of engineering fields. The Coanda effect has long been applied to improve aerodynamic characteristics, such as the drag/lift ratio of flight body, the engine exhaust plume thrust vectoring, and the aerofoil/wing circulation control. During the energy crisis of the seventies, the Coanda jet was applied to reduce vehicle drag and led to drag reductions of as much as about 30% for a trailer configuration. Recently a variety of industrial applications are exploiting another characteristics of the Coanda jets, mainly the enhanced turbulence levels and entrainment compared with conventional jet flows. Various industrial burners and combustors are based upon this principle. If the curvature of the Coanda surface is too great or the operating pressure too high, the jet flow will break away completely from the surface. This could have catastrophic consequences for a burner or combustor. Detailed understanding of the Coanda jet flow is essential to refine the design to maximize the enhanced entrainment in these applications.

• 한국문헌정보학회지
• /
• 제50권1호
• /
• pp.5-23
• /
• 2016

현대사회의 청소년은 책을 많이 읽지 않는 것으로 나타났다. 이들을 독서활동으로 유인하기 위한 기초적 조사로 청소년의 독서동기에 미치는 북트레일러의 효용성을 조사하였다. 이를 위해 (1) 독서와 북트레일러에 대한 기본적 인식, (2) 북트레일러 시청 후의 인식, (3) AIDMA & AISAS 하위요소에 적용한 독자행동반응에 관한 설문을 마련하고, 중고등학교 학생 121명을 대상으로 조사하였다. 그 결과 청소년의 독서동기에서 북트레일러가 서평과 같은 인쇄매체보다 훨씬 더 효과적인 것으로 나타났다. 선호하는 북트레일러 유형은 스토리전개형으로, 선호하는 북트레일러의 구성요소는 책의 줄거리, 배경음악, 영상효과 순으로 나타났다. 또한 청소년 독자행동반응을 조사한 결과 책에 대한 관심과 흥미, 책에 대한 기억, 책을 읽고 싶은 욕구와 정보검색, 북트레일러 제작 등 모든 영역에서 매우 긍정적인 반응을 보였다. 북트레일러가 독서동기부여 및 독서표현활동으로 매우 효과적으로 활용될 수 있다는 것을 보여주는 결과이다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2009년도 공동학술대회
• /
• pp.171-172
• /
• 2009

일반적으로 컨테이너 공로 운송은 근거리 운송, 장거리 운송, 셔틀 운송으로 구분되고, 컨테이너 차량은 chassis 형태에 따라 20' 컨테이너 전용, 40' 컨테이너 전용, combined chassis 차량으로 나눌 수 있다. 본 논문에서는 셔틀 운송을 고려한 컨테이너 차량 경로 문제를 다루고자 한다. 셔틀 서비스는 O/D pairs가 같은 물량이 여러 개 발생할 수 있다. 문제 정의는 기존의 연구된 combined chassis 트레일러를 이용한 컨테이너 차량 경로 문제와 유사하지만 셔틀 서비스의 특징을 고려해야 한다. 이에 각 노드를 한 번 이상 방문할 수 있는 pick-up and delivery 제약을 가진 차량경로문제를 근간으로 하여 combined chassis 트레일러를 이용한 컨테이너 셔틀 운송계획 문제를 정의하고, 적합하고 효율적인 해법을 제안하고자 한다.

• 농업생명과학연구
• /
• 제51권1호
• /
• pp.205-212
• /
• 2017

경운기 시뮬레이터 운전자가 가상환경에서 교육에 몰입할 수 있도록 현실세계에 가상 물체를 겹쳐 보여주는 증강 현실 기술을 구현하였다. 3D 카메라 입력 장치로부터 초당 30 frame 이상 속도로 경운기 모의 운전 장치의 영상을 획득한다. 획득된 현실 영상을 크로마키 처리하여 가상 현실과 결합하였다. RGB 영상의 HSI 변환 실험결과 색상 최대값 0.52, 최소값 0.153, 채도 최대값 0.57, 최소값 0.16, 명도 최대값 1, 최소값 0.12이 크로마키 처리를 위해 최적값이었다. 본 연구에서는 키패드를 이용하여 크로마키 처리된 현실 영상의 위치를 전 후 상 하 좌 우를 버튼으로 조정하여 초기 결합위치를 조정할 수 있고 최종 조정된 값은 저장하여 유지 관리되도록 하였다. 이를 토대로 초당 30프레임 이상의 속도로 가상현실과 크로마키 처리 영상을 결합한 증강현실 구현이 가능함을 보였다.

• 한국산업융합학회 논문집
• /
• 제26권1호
• /
• pp.193-199
• /
• 2023

In this study, an analysis was conducted to analyze the structural stability of the piezoelectric power generation module and to determine the optimal burying hole interval for concrete, the installation site of the power generation module. A piezoelectric element refers to a functional ceramic having a piezoelectric direct effect that converts mechanical energy into electrical energy and a piezoelectric reverse effect. In the analysis of the piezoelectric power generation module, the load condition was applied with about 16 tons and a total of 10 wheels in consideration of the container trailer. The purpose was to evaluate the stability of major components of the piezoelectric power generation module through finite element analysis. In order to determine the optimal burying location of the concrete ground for burying the piezoelectric power generation module, the stability of the ground structure according to the distance of the holes was determined. As a result of the analysis, the maximum stress of the piezoelectric power generation module was generated in the support spring, showing a stress of about 276.7 MPa. It was found that the spacing of holes for embedding the piezoelectric power generation module should be set to a minimum of 100 mm or more.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.472-478
• /
• 2009

The scopes of the supply chain management in construction projects has expanded from the field management focusing on field storage, transportation, and lifting to the whole supply chain from the materials to field. The expansion of the supply chain management can raise the possibilities of leaner production, which enables shortened lead time of the difficult-to-operate materials, and prevents the work interference or delay. However, the expanded management range requires more information and management than an existing management style currently used for factory production of iron frame, curtain wall, PC, etc. In addition, there are limitations that expand the existing management style into the new supply chain management in construction projects and therefore it is required to automate the existing management style in order to extend the management range. The objective of this study is to propose the process and equipment that can manage the supply chain of the materials which range from the factory production to the field storage based on RFID/USN techniques, introducing small-sized transportation equipment(intelligent pallet), the vehicle tool kit(intelligent trailer), and in-and-out management equipment(Gate Sensor) as a prototype to effectively develop the appliances for operating the proposed process, and present the application possibility of the appliances. The full paper will present then the test results that the proposed appliances for the supply chain management automatically transmit and receive the generated information between the appliances or the appliance and sever under various wireless network circumstances such as zigbee, wibro, Wi-Fi, and CDMA.

• 대한토목학회논문집
• /
• 제28권1A호
• /
• pp.39-49
• /
• 2008

본 연구에서는 교량의 노면조도 및 교량과 차량 사이의 상호작용을 고려한 수치해석방법을 사용하여 여러 매개변수에 대한 강판형교의 동적응답을 연구하였다. 대상교량은 건설교통부에서 제정한 "도로교 상부구조 표준도"에 수록되어 있는 지간이 20 m, 30 m와 40 m인 단순 강판형교를 사용하고, 여러 종류의 도로에 대하여 생성시킨 노면조도를 사용하였다. 차량은 2축과 3축 덤프트럭 및 5축 트랙터-트레일러인 표준트럭(DB-24)을 3차원으로 모델링하고, 교량은 주형을 보요소로, 콘크리트 바닥판은 쉘요소로 이상화시켰으며 주형과 콘크리트 바닥판 사이는 Rigid Link를 사용하여 3차원으로 모델링하였다. 이와 같은 차량 및 노면조도를 사용하여 강판형교의 지간별, 통행 차종별 및 노면조도별 충격계수와 DLA를 구하고 각국의 설계기준과 비교 검토하였다.

• 대한토목학회논문집
• /
• 제26권6A호
• /
• pp.989-999
• /
• 2006

본 연구에서는 차량과 교량을 3차원으로 모델링하고, 교량의 노면조도 및 교량과 차량 사이의 상호작용을 고려하여 이동 차량이 교량을 통과할 때 교량의 선형동적해석을 수행할 수 있는 수치해석방법을 제시하였다. 3차원 차량모델에는 타이어의 접지폭을 고려하여 탠덤 다판스피링 차륜축의 피칭을 고려하여 단일차량인 2축과 3축 차량 및 5축 트랙터-트레일러를 각각 7-자유도, 8-자유도 미 14-자유도로 모델링하였다. 차량의 운동방정식은 Lagrange 방정식을 사용하여 유도하였고, 그 해는 Newmark-${\beta}$법을 사용하여 계산하였다. 교량의 노면조도는 평균값이 영인 정상확율분포롤 가정한 지수스팩트럴밀도를 사용하여 생성시켰다. 교량은 주형을 보요소로, 콘크리트 바닥판은 쉴요소를 이상화시켰으며 주형과 콘크리트 바닥판 사이는 Ragid Link를 사용하여 3차원으로 모델링하였다. 교량의 운동방정시은 모우드 중첩법을 사용하여 풀었다. 본 연구에서 제시한 수치해석방법으로 구한 결과와 Whittemoare 등과 Fenves 등이 실시한 실험값과 비교 검토하여 본 연구의 타당성을 입증하였다.

• 무역학회지
• /
• 제45권2호
• /
• pp.51-65
• /
• 2020

According to an analysis of 560 foreign-invested companies investing in South Korea's manufacturing industry, the following three facts were found. First, the proportion of sales by manufacturing foreign-invested companies is divided into 68.5 percent of domestic sales and 31.5 percent of exports. From 68.5 percent of domestic sales, sales to Korean companies are 60.5 percent, including 37.1 percent for large companies and 23.4 percent for small and medium-sized companies, while only 8.0 percent for domestic consumers. Second, the investment sectors of manufacturing foreign-invested enterprises are 'machine and equipment manufacturing', 'chemical and chemical-chemical material manufacturing-excluding pharmaceuticals', 'electronic components, computers, video, sound and communication equipment manufacturing' and 'vehicle and trailer manufacturing'. It overlaps with electric·electronics, petro-chemicals and automobiles, which are Korea's main industries and areas of Korean global companies. Third, 31.5 percent of the sales of foreign-invested companies in the manufacturing sector are exported. Foreign-invested companies export their products to use them for their parents or affiliates or to the third countries. The analysis shows that foreign-invested companies invested in Korea for B2B transactions with Korean companies. The implications are that Korea can attract foreign investments by utilizing Korean companies' demand for intermediate goods. Foreign-invested companies can invest in Korea in order to use Korea, which has signed free trade agreements with the US, the EU and ASEAN, as an export platform.

• Journal of Biosystems Engineering
• /
• 제3권1호
• /
• pp.1-19
• /
• 1978

Power tiller is a major unit of agricultural machinery being used on farms in Korea. About 180.000 units are introduced by 1977 and the demand for power tiller is continuously increasing as the farm mechanization progress. Major farming operations done by power tiller are the tillage, pumping, spraying, threshing, and hauling by exchanging the corresponding implements. In addition to their use on a relatively mild slope ground at present, it is also expected that many of power tillers could be operated on much inclined land to be developed by upland enlargement programmed. Therefore, research should be undertaken to solve many problems related to an effective untilization of power tillers on slope ground. The major objective of this study was to find out the travelling and tractive characteristics of power tillers being operated on general slope ground.In order to find out the critical travelling velocity and stability limit of slope ground for the side sliding and the dynamic side overturn of the tiller and tiller-trailer system, the mathematical model was developed based on a simplified physical model. The results analyzed through the model may be summarized as follows; (1) In case of no collision with an obstacle on ground, the equation of the dynamic side overturn developed was: $$\sum_n^{i=1}W_ia_s(cos\alpha cos\phi-{\frac {C_1V^2sin\phi}{gRcos\beta})-I_{AB}\frac {v^2}{Rr}}=0$$ In case of collision with an obstacle on ground, the equation was: $$\sum_n^{i=1}W_ia_s\{cos\alpha(1-sin\phi_1)-{\frac {C_1V^2sin\phi}{gRcos\beta}\}-\frac {1}{2}I_{TP} \( {\frac {2kV_2} {d_1+d_2}\)-I_{AB}{\frac{V^2}{Rr}} \( \frac {\pi}{2}-\frac {\pi}{180}\phi_2 \} = 0 $$ (2) As the angle of steering direction was increased, the critical travelling veloc\ulcornerities of side sliding and dynamic side overturn were decreased. (3) The critical travelling velocity was influenced by both the side slope angle .and the direct angle. In case of no collision with an obstacle, the critical velocity $V_c$ was 2.76-4.83m/sec at $\alpha=0^\circ$, $\beta=20^\circ$ ; and in case of collision with an obstacle, the critical velocity $V_{cc}$ was 1.39-1.5m/sec at $\alpha=0^\circ$, $\beta=20^\circ$ (4) In case of no collision with an obstacle, the dynamic side overturn was stimu\ulcornerlated by the carrying load but in case of collision with an obstacle, the danger of the dynamic side overturn was decreased by the carrying load. (5) When the system travels downward with the first set of high speed the limit {)f slope angle of side sliding was $\beta=5^\circ-10^\circ$ and when travels upward with the first set of high speed, the limit of angle of side sliding was $\beta=10^\circ-17.4^\circ$ (6) In case of running downward with the first set of high speed and collision with an obstacle, the limit of slope angle of the dynamic side overturn was = $12^\circ-17^\circ$ and in case of running upward with the first set of high speed and collision <>f upper wheels with an obstacle, the limit of slope angle of dynamic side overturn collision of upper wheels against an obstacle was $\beta=22^\circ-33^\circ$ at $\alpha=0^\circ -17.4^\circ$, respectively. (7) In case of running up and downward with the first set of high speed and no collision with an obstacle, the limit of slope angle of dynamic side overturn was $\beta=30^\circ-35^\circ$ (8) When the power tiller without implement attached travels up and down on the general slope ground with first set of high speed, the limit of slope angle of dynamic side overturn was $\beta=32^\circ-39^\circ$ in case of no collision with an obstacle, and $\beta=11^\circ-22^\circ$ in case of collision with an obstacle, respectively.