• Advances in Energy Research
• /
• v.1 no.1
• /
• pp.79-95
• /
• 2013

The purpose of this paper is to investigate the surface temperatures of the shelter of three public buildings in the city of Xanthi, in northern Greece. The buildings were built in different time periods and consequently they have different technical characteristics. Respectively, we survey the three following buildings that have been built in 1880 (Municipality Hall of Xanthi), in 1970 (Municipality Amphitheatre) and in 2002 (Bank offices building). Data have been gathered by the use of thermal camera and the survey has been conducted from January up to July. The data gathered regard measurements of the surface temperature of the exterior walls of the shelters, both inside and outside. The study aims at the evaluation of the thermal behavior of the shelter of buildings, which built in different time and under different regulations. The gathered data of the surface temperatures compare the different thermal behavior of the shelter. The analysis of the results and diagrams show that the thick masonry of the traditional Municipality Hall offers an insulation that is adequate. The building of 1970, which was constructed with the previous buildings regulation, has thermal losses due to inadequate insulation. The new building of 2002 has low thermal losses.

• Journal of architectural history
• /
• v.14 no.4 s.44
• /
• pp.73-86
• /
• 2005

The purpose of this study is to prove the correlations among various factors what determined to formation of front elevation proportion system through making an actual survey and investigating. According to the analysis of them, we make conclusions as follows; 1, On the assumption that average distance of 1Kan(間) is 1, the height of foundation is 0.21, the height of floor from foundation is 0.24, the height of normal column from floor is 0.85, the height of eaves from foundation is 1.10. 2. Southeast faced buildings are wider than southwest faced buildings in the distance of 1Kan (間) in the range of $110{sim}220mm$. The height of foundation and floor in the southeast faced buildings are higher than those in southwest faced buildings beside the height of normal column, eaves, high column in the southwest faced buildings are higher than those in southeast faced buildings. 3. As number of front Kan(間) increases, the distance of 1Kan(間) decrease and the height of eaves and high column(高柱) increases. This is cause of making a maximum needed inner space by increasing the distance of 1Kan(間). This is an wisdom for living from ancestors. 4. As number of Dori(道里) increases, the distances of 1Kan are nearly same but the height of eaves and high column(高柱) increases about 300mm, This is a natural result from an increasing of building scale. 5. The distance of 1Kan(間) in later 19C building is most wide but, the unit heights are minimal average values at year 1900 as a reference mark. After this, the height of normal column, eaves, high column are higher about $170{sim}330mm$. 6. The number of Kan in front elevation, Dori(道里), and direction of building have correlations each other in proportion system of traditional housing An-Chae with significant level, p<0.05.

• Structural Engineering and Mechanics
• /
• v.63 no.5
• /
• pp.617-628
• /
• 2017

In order to study the failure mode and seismic behavior of the interior-joint in steel traditional-style buildings, a single beam-column joint and a double beam-column joint were produced according to the relevant building criterion of ancient architectural buildings and the engineering instances, and the dynamic horizontal loading test was conducted by controlling the displacement of the column top and the peak acceleration of the actuator. The failure process of the specimens was observed, the bearing capacity, ductility, energy dissipation capacity, strength and stiffness degradation of the specimens were analyzed by the load-displacement hysteresis curve and backbone curve. The results show that the beam end plastic hinge area deformed obviously during the loading process, and tearing fracture of the base metal at top and bottom flange of beam occurred. The hysteresis curves of the specimens are both spindle-shaped and plump. The ultimate loads of the single beam-column joint and double beam-column joint are 48.65 kN and 70.60 kN respectively, and the equivalent viscous damping coefficients are more than 0.2 when destroyed, which shows the two specimens have great energy dissipation capacity. In addition, the stiffness, bearing capacity and energy dissipation capacity of the double beam-column joint are significantly better than that of the single beam-column joint. The ductility coefficients of the single beam-column joint and double beam-column joint are 1.81 and 1.92, respectively. The cracks grow fast when subjected to dynamic loading, and the strength and stiffness degradation is also degenerated quickly.

• Structural Engineering and Mechanics
• /
• v.50 no.3
• /
• pp.383-401
• /
• 2014

Over the past years, hybrid building systems, consisting of reinforced concrete frames in bottom and steel frames in top are used as a cost-effective alternative to traditional structural steel or reinforced concrete constructions. Dynamic analysis of hybrid structures is usually a complex procedure due to various dynamic characteristics of each part, i.e. stiffness, mass and especially damping. In hybrid structures, one or more transitional stories with composite sections are used for better transition of lateral and gravity forces. The effect of transitional storey has been considered in no one of the studies in the field of hybrid structures damping. In this study, a method has been proposed to determining the equivalent modal damping ratios for hybrid steel-concrete buildings with transitional storey. In the proposed method, hybrid buildings are considered to have three structural systems, reinforced concrete, composite steel and concrete (transitional storey) and steel system. In this method, hybrid buildings are substituted appropriately with 3-DOF system.

• International Journal of High-Rise Buildings
• /
• v.2 no.1
• /
• pp.31-38
• /
• 2013

The movement towards sustainable building design can result in unique fire protection challenges and concerns, especially with super tall buildings in relationship to traditional prescriptive code compliance. Different countries haves different code requirements as well as local best practices and may cause conflict with the design features when designing green buildings. These include, but not limited to green roofs, sprinkler water quality and testing, fire department access and areas of refuge with direct or indirect impact by the perspective code compliance. The solutions to these prescriptive code challenges and fire safety concerns can range from simple alternatives to more detailed engineering performance-based design analyses with good solid practice.

• Computational Structural Engineering
• /
• v.23 no.2
• /
• pp.14-17
• /
• 2010

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2009.11a
• /
• pp.55-58
• /
• 2009

Traditional pile-buildings in Southeast Asia has high utility. Their floors are lifted above the ground to stave off humidity in the house, increase the amenity and hygienic condition, fend off fierce animals or harmful animals like rat, and protect the house from being submerged in flood waters. Such traditional pile-buildings have Austronesian saddle-backed roof commonly, and are built through various techniques such as joining and mortising, without use of nails. The roof has a considerably large proportional appearance, and for this formal characteristics, the roof is symbolized as boat on occasions. The roof has dual structures or is lifted in some cases to facilitate the ventilation, and the wall is formed to maximize the ventilation. This housing types the hierarchy of foundation, housing space, and roof, which implies religious symbolism that human is above animal and God is above human. However, housing types in Southeast Asia have very different detailed form and culture, depending on the ethnic and religious characteristics. As explained above, this study examines the common aspects and diversity based on the form and culture of traditional housing of Southeast Asia and provides useful basic academic data.

• Journal of the Korean Institute of Rural Architecture
• /
• v.14 no.3
• /
• pp.69-76
• /
• 2012

This study aims to investigate the mechanism that analysis of the layout-structure of the Traditional Village Oeam. It can identify through the division of area, the properties of layout residential type, the relationship between buildings and roads and location of buildings and a gate. Traditional Folk Village is our precious cultural heritage. However, now is time for our disappearing heritage due to the indiscriminate development. This study will good references for residential Complex in modern society. As a result of this study road in the center of village is divided into two areas. The road and stream plays an important role in the housing layout and composition of the village. Oeam village houses are separated by scale as large, middle, small scale housing. The courty yard is formed widely through a various of housing plan. So that ventilation and light is favorable even if the main house is high. Each house has the individuality with avoiding the village roads and using the byroads and stone wall. Therefore, each house can protect the privacy of houses.

• Steel and Composite Structures
• /
• v.28 no.5
• /
• pp.641-653
• /
• 2018

This paper presents experiment and bearing capacity analyses of steel dual-lintel column (SDC) joints in Chinese traditional style buildings. Two SDC interior joints and two SDC exterior joints, which consisted of dual box-section lintels, circular column and square column, were designed and tested under low cyclic loading. The force transferring mechanisms at the panel zone of SDC joints were proposed. And also, the load-strain curves at the panel zone, failure modes, hysteretic loops and skeleton curves of the joints were analyzed. It is shown that the typical failure modes of the joints are shear buckling at bottom panel zone, bending failure at middle panel zone, welds fracturing at the panel zone, and tension failure of base metal in the heat-affected zone of the joints. The ultimate bearing capacity of SDC joints appears to decrease with the increment of axial compression ratio. However, the bearing capacities of exterior joints are lower than those of interior joints at the same axial compression ratio. In order to predict the formulas of the bending capacity at the middle panel zone and the shear capacity at the bottom panel zone, the calculation model and the stress state of the element at the panel zone of SDC joints were studied. As the calculated values showed good agreements with the test results, the proposed formulas can be reliably applied to the analysis and design of SDC joints in Chinese traditional style buildings.

• Korean Institute of Interior Design Journal
• /
• v.20 no.3
• /
• pp.190-197
• /
• 2011

The purpose of this study is to examine the characteristics of space design appearing in facade and interior composition factors of buildings in the colonial period in Indonesia. Research method is a field study, and subjects of the study is 14 buildings built in the colonial period located in Jakarta. The research result is as follows. First, Facade is divided into C type (colonial style), CT type (colonial style + traditional style), CA type (colonial style + art deco style), and CTA type (colonial style + traditional style + art deco style). Among them, CT type which shows both a colonial style and traditional style accounts for the most. As for Java traditional style mainly shows Joglo roof style and bratticing decoration on top of gates, and the colonial style presents both an Amsterdam canal housing style such as narrow Facade and unusual Gable, and a classical style such as pediment, entablature, and columns. Second, interior space is divided into C type (colonial style), CT type (colonial style + Indonesian traditional style), A type (art deco style), and CA type (colonial style + art deco style). Among them, CT type was also accounted for the most. Selected traditional style is a shape of bratticing decoration on top of gates and a shape of tenon of Joglo housing structure. Colonial style showed classical style such as exposed crossbeams, columns, and pilasters, and as for unique decoration, there are Ancona decoration and Delft tile decoration. On one hand, art deco style used typical art deco factors such as contrast of various materials and complementary color or golden color use as well as zigzag or vertical lines and geometric ornament by combining with colonial style or traditional style. It is expected that such research result will be a practical reference data when Korean construction companies or interior design companies advance Indonesia.