• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.412-417
• /
• 2003

As optical disk drives become designed for portable and hostile environment, higher storage density and smaller size, optical disk drives have a possibility to miss the track and not to read the data. This paper presents the modeling of an optical disk drive as 3-DOF system. Optical disk drives are tested with a linear drop test device and their results are compared with simulation results in order to verify the shock analysis. Finally, this paper shows shock response of a optical disk drive with changes of parameters

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2001.11a
• /
• pp.129-137
• /
• 2001

As the rotational speed and the track density are increased, the vibration of disk/spindle system becomes critical issue. In this work, we propose a simple inclined air bearing(20mm${\times}$20mm) system which is positioned very near to the rotating disk especially compact disc(CD) as a flexible disk, and we investigate suppressing effect about disk mode (0,0) both experimentally and numerically. We find dynamic stiffness and damping coefficients of bearing and apply to the disk vibration. The results show about 10 percent errors comparing to the experimental results. Also we investigate experimentally the reduction of disk vibration and power consumption with two different kinds of inclined bearing for normal disk drive system, which has tray and cover. We find inclined air bearing can decrease about 30 percents of the original disk vibration amplitude.

• International Journal of Railway
• /
• v.5 no.2
• /
• pp.71-76
• /
• 2012

Recently, axle load, operating speed and traffic density on railroads have had a tendency to increase and thereby cause additional pressure applied on used track. These operating conditions frequently result in service failure due to wear caused by wheel-rail contact and fatigue damage under cyclic loading. Among rail defects, the transverse crack, which has been the most dangerous type of fatigue damages, is developed from the subsurface crack near the rail running face and grows perpendicular to the rail surface. Therefore, it is necessary to investigate systematically the growth behavior of transverse crack for rail steel under mixed mode. In this study, the fatigue crack growth behavior of the transverse crack in rail steel was experimentally investigated under mixed-mode variable amplitude loadings.

• Bulletin of the Korean Space Science Society
• /
• 2004.10b
• /
• pp.376-379
• /
• 2004

Operational orbit determination (OOD) depends on the capability of generating accurate prediction of spacecraft ephemeris in a short period. The predicted ephemeris is used in the operations such as instrument pointing and orbit maneuvers. In this study the orbit prediction problem consists of the estimating diverse arc length orbit using GPS navigation data, the predicted orbit for the next 48 hours, and the fitted 30-hour arc length orbits of double differenced GPS measurements for the predicted 48-hour period. For 24-hour orbit arc length, the predicted orbit difference from truth orbit was 205 meters due to the along-track error. The main error sources for the orbit prediction of the Low Earth Orbiter (LEO) satellite are solar pressure and atmosphere density.

• Journal of the Society of Naval Architects of Korea
• /
• v.41 no.4
• /
• pp.17-29
• /
• 2004

Internal waves are computed using a ghost fluid method on an unstructured grid. Discontinuities in density and dynamic pressure are captured in one cell without smearing or oscillations along a multimaterial interface. A time-accurate incompressible Navier-Stokes/Euler solver is developed based on a three-point backward difference formula for the physical time marching. Artificial compressibility is introduced with respect to pseudotime and an implicit method is used for the pseudotime iteration. To track evolution of an interface, a level set function is coupled with the governing equations. Roe's flux difference splitting method is used to calculate numerical fluxes of the coupled equations. To get higher order accuracy, dependent variables are reconstructed based on gradients which are calculated using Gauss theorem. For each edge crossing an interface, dynamic pressure is assigned for a ghost node to enforce the continuity of total pressure along the interface. Solitary internal waves are computed and the results are compared with other computational and experimental results.

• Proceedings of the KSR Conference
• /
• 2002.10b
• /
• pp.1029-1034
• /
• 2002

Object of this paper are numerical and experimental evaluation of Korean Standard Train Loading(L-loading scheme) with respect to UIC's and real train loading, quantitative formulation of the real train types in South Korea. These objects are require to changing environment of train operation, for example, high density traffic and gradual train speed increase. For the reasonable repair, reinforcement and rehabilitation of existing railway infrastructures, statistical analysis of the loading effect during the long term experiment in conventional lines have to conduct. Statistical quantitative formulation of the loading case need to consistency numerical evaluation of the railway safety. Hereafter, those results will be core technical data for the economy enhancement of international line construction. Further, these results are using to make track maintenance criterions for transcontinental, speed up railway and revision of standard train leading diagram.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.6
• /
• pp.103-109
• /
• 2007

With the increase of track density, high rotational speed and the compatibility for various media in optical disk drives, the effective design to vibration reduction is very important for robust operation. Especially when a slim optical disk drive for a notebook PC is excited by a mass-unbalanced disk, internal vibration and its transmission to external case bring about severer problem than that of conventional one. In this paper a design process of a rubber mount in a slim optical disk drive for vibration reduction is presented. The characteristics of rubbery materials - hyper-elastic and visco-elastic - are measured with standard specimens. The static stiffness of a rubber mount was calculated by FEM and the dynamic stiffness is predicted with the static stiffness and the impedance test data of the standard specimen. The transmissibility tests are performed for the purpose of verification of the design process.

• 한국연소학회:학술대회논문집
• /
• 2015.12a
• /
• pp.265-266
• /
• 2015

The multi-environment PDF model coupled with flamelet generated manifolds(FGM) has been developed for a large eddy simulation of turbulent partially premixed lifted flame. This approach has a capability to realistically account for the transport and evolution of probability density function for mixture fraction and progress variable with the manageable computational burden. Using the tabulated chemistry, it is possible to track radical distributions which is important to predict autoignition process with the vitiated coflow environment. Numerical results indicate that the present yields the good agreement with experimental data in terms of mixture fraction, temperature, and species mass fractions.

• Transactions of the Society of Information Storage Systems
• /
• v.2 no.2
• /
• pp.156-162
• /
• 2006

In this paper, we have investigated the disc warping in high-speed slim-type optical disc drive. The track density as well as high rotational speed of the information storage devices must be increased to enhance their recording capacity and data transfer rate. Generally, ODD used in the Lap-top computer has small inner space. So, the flow instability of the inner space is increased rapidly with its rotational speed. In extreme case, the flow instability may cause the malfunction of the read/write pick-up of drives. The experiments and numerical analysis were carried out for several cases and the result shows the influence of airflow to the disc warping.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.136-136
• /
• 2013

High-resolution photoemission spectroscopy (HRPES) measurements were collected and density functional theory (DFT) calculations were conducted to track the coverage dependent variation of the absorption structure of 2-thiophenecarboxaldehyde (C4H3SCHO: TPCA) on the Ge(100) surface at room temperature. In an effort to identify the most probably adsorption structures on the Ge(100) surface, we deposited TPCA molecules at a low coverage and at a high coverage and compared the differences between the electronic features measured using HRPES. The HRPES data provided three possible adsorption structures of TPCA on the Ge(100) surfaces, and DFT calculations were used to determine the plausibility of the structures. HRPES analysis, corroborated by DFT calculations, indicated that an S-dative bonded structure was the most probable adsorption structure at relatively lower coverage levels, the [4+2] cycloaddition structure was the second most probable structure, and the [2+2]-C=O cycloaddition structure was the last probable structure on the Ge(100) surfaces at relatively higher coverage levels.