• 제목/요약/키워드: trace of matrix

검색결과 139건 처리시간 0.029초

Estimation of Sodium Hydroxide Waste Origin-Destination Matrices for Preventing Hazardous Material Transportation Disasters

  • Kim, Geun-Young;Jung, Tae-Hwa;Kim, Sang-Won
    • 한국방재학회 논문집
    • /
    • 제9권1호
    • /
    • pp.73-79
    • /
    • 2009
  • 유해물질은 만일 누출된다면 화재 폭발 독성 및 위해성이 있는 물질을 말한다. 많은 선진국에서 유해물질의 수송이 증가하고 있기 때문에 유해물질의 생산 저장 수송 사용 및 폐기에 대한 정확한 정보는 매우 중요하다. 유해물질의 수송은 유해물질의 사용과정에서 핵심적인 기능이라고 말할 수 있다. 정부는 유해물질에 대해 많은 법령과 규제, 기준들을 개발해 왔다. 그러나 한국의 법령, 규제, 기준들은 비록 유해물질의 이동이 유해물질 수송에 대한 안전과 방재차원에서 중요한 정보임에도 불구하고, 유해물질의 O-D수송에 대한 정확한 정보를 보장하고 있지 못한 실정이다. 본 연구의 목적은 한국의 유해물질 수송에 대해 새롭게 대두되거나 기존에 제기된 이슈들을 조사하고, 제한된 자료를 가진 상황에서 유해물질에 대한 O-D매트릭스를 예측하는 기법을 개발하는 것이다. 본 연구는 유해물질 수송사례에 대한 40개의 후보군 중에서 수산화나트륨 폐기물에 대한 수송이 사례 연구로 선정하였다. 성장률법이 수산화나트륨 폐기물 수송의 2005년 O-D매트릭스를 추정하는데 적용되었다. 행렬보정기법이 추정된 수산화나트륨 O-D매트릭스를 보정하는데 사용되었다. 본 연구는 유해물질에 대한 O-D추정기법의 적용가능성을 제시하였다. 본 연구를 통해 도출된 수산화나트륨 폐기물 O-D 매트릭스는 수산화나트륨 수송의 수송로와 수송구간을 추적하는데 사용되어 진다.

흑연로원자흡수분광법에 의한 쌀분말시료중의 비소, 납, 셀레늄의 정량 (Determination of Arsenic, Lead and Selenium in Rice Flour by Graphite Furnace Atomic Absorption Spectrometry)

  • 조경행;서정기
    • 분석과학
    • /
    • 제12권2호
    • /
    • pp.130-135
    • /
    • 1999
  • 쌀분말시료중에 미량으로 존재하는 비소(As), 납(Pb), 셀레늄(Se)등을 분석하기 위하여 매질변형방법에 의한 흑연로원자흡수분광법을 이용하였다. 흑연로내에서 측정원소의 열안정성과 간섭매질의 휘발성을 증가시키기 위해 매질변형재로서 팔라듐과 질산마그네슘 혼합물을 사용하였다. 몇가지 금속원소(As, Cd, Cu, Pb, Se, Zn)에 대해 팔라듐과 질산마그네슘 혼합물에 의한 매질변형효과를 검토한 결과 As, Pb, Se에 대해 뚜렷한 회화 및 원자화 온도의 증가와 흡수도 상승효과를 확인 하였다. 마이크로파 산가압분해법에 의해 쌀분말시료를 분해하고 표준물첨가법에 의해 As, Pb, Se을 분석하였다. 바탕선 보정에는 Zeeman effect를 이용하였으며 특성농도는 건조시료기준 As 26 ng/g, Pb 18 ng/g, Se 24 ng/g이었다.

  • PDF

용체화처리된 Mg-4%Zn 합금의 부식 저항성에 미치는 미량 Ca 첨가의 영향 (Effect of Trace Amount of Ca on Corrosion Resistance of Solutionized Mg-4%Zn Alloy)

  • 전중환;황인제
    • 열처리공학회지
    • /
    • 제29권4호
    • /
    • pp.168-175
    • /
    • 2016
  • Influence of trace amount of Ca addition on the corrosion resistance was comparatively investigated in solutionized Mg-4%Zn and Mg-4%Zn-0.1%Ca alloys. In as-cast state, the alloys were characterized by primary ${\alpha}-(Mg)$ dendrite with MgZn intermetallic compound particles. After solution-treatment, both alloys consisted of single ${\alpha}-(Mg)$ phase by dissolution of the compound particles into the matrix. It was found from the immersion and electrochemical corrosion tests that the Mg-4%Zn alloy had better corrosion resistance than the Mg-4%Zn-0.1%Ca alloy. Morphological and compositional analyses on the surface corrosion products indicate that the incorporation of Ca oxide with low PBR value into the surface corrosion products would be responsible for the decreased corrosion resistance of the Ca-containing alloy.

농촌지역 대기 중 PM2.5의 화학적 특성과 오염원 정량 평가 (Source Apportionment and Chemical Characteristics of Atmospheric PM2.5 in an Agricultural Area of Korea)

  • 정진희;임종명;이진홍
    • 환경영향평가
    • /
    • 제27권5호
    • /
    • pp.431-446
    • /
    • 2018
  • 본 연구에서는 충청남도 논산시 농촌지역의 대기 중 블랙카본, 이온, 금속원소 등을 포함한 $PM_{2.5}$의 화학적 특성을 규명하고 $PM_{2.5}$의 오염원을 정량적으로 평가하였다. 분석의 정도관리를 평가한 결과, 금속원소를 포함한 대부분의 미량성분의 분석값은 상대오차와 상대표준편차가 10% 미만이었다. 농촌지역의 $PM_{2.5}$의 평균 농도($20.1{\pm}10.1{\mu}g/m^3$)는 2018년에 강화된 연평균 기준을 초과하는 수준이었다. $PM_{2.5}$와 탄소 및 이온성분은 서로 유의한 상관성을 보였고, 미량성분의 농도는 $10^{-3}{\sim}10^4ng/m^3$ 범위인 것으로 나타났다. 양의 인자 분석법(PMF, Positive Matrix Factorization)을 이용하여 오염원을 평가한 결과, 농촌지역의 $PM_{2.5}$의 오염원은 secondary aerosol(34.4%), soil/road dust(20.1%), biomass burning(16.9%), incineration/fuel combustion(13.2%), vehicle exhaust(12.2%), sea-salt(3.17%) 이었다. 도시지역과 달리 농촌지역은 연소와 관련된 오염원이 중요하였고 따라서, 농촌지역의 관리 대상 오염원으로서 불법소각은 세심한 대책을 필요로 한다.

콘크리트 재료손상에 대한 유한요소상의 의미 (Numerical Implication of Concrete Material Damage at the Finite Element Levels)

  • 이인규;노영숙;김우
    • 콘크리트학회논문집
    • /
    • 제18권1호
    • /
    • pp.37-46
    • /
    • 2006
  • 재료구성관계의 범위에서의 강성 성능저하의 스펙트럼 특성을 기본 유한요소법을 이용하여 개별 유한요소와 그의 조합행렬에 대한 스펙트럼 분석을 상호 비교하여 수치적인 의미를 확인하고자 한다. 본 논문의 주 관심부분은 탄성 강성특성의 저하로 인한 콘크리트 재료의 손상정도를 다양한 스펙트럼 특성인 최소고유치의 변화, 유효계수의 변화 등의 시나리오를 가지고 해의 유일성 여부, 특이성의 표현 여부 그리고 변분유계와의 근접여부 등을 관찰하였다. 1차원 및 2차원 예제가 제시되었으며 강성이 서로 다른 혼입재를 가진 2상복합체의 형식으로 콘크리트의 골재, 매트릭스를 표현하고 상호연관성 및 기하학적 영향을 고려하였다. 더불어 2차원 탄성계면요소를 이용하여 골재와 매트릭스 사이에 존재하는 약한 고리인 계면을 묘사하고 이들 계면의 탄성계수의 성능저하로 인한 전체 구조계의 영향 등을 분석, 비교하였다.

옥천지향사대 내 수안보-수산 지역에 분포하는 함력천매암질암 기질의 화학 조성과 탄산염암의 안정동위원소 연구 (Geochemical and Stable Isotopic Studies of the Matrix of Pebble Bearing Phyllitic Rocks and Carbonate Rocks from the Suanbo and Susanri District in the Okchon Geosynclinal Zone)

  • 김규한;민경덕
    • 자원환경지질
    • /
    • 제29권1호
    • /
    • pp.25-33
    • /
    • 1996
  • Stable isotopic ratios of the carbonate rocks and chemical compositions of the matrix of pebble bearing phyllitic rocks known as the Hwanggangri Formation, which are in hot debate on their origin such as tillite, debris flow and turbidite, were determined to interpret their depositional environment. Argillaceous matrix of the pebble bearing phyllitic rocks has a high content of CaO (av. 19.5%) and MgO (av. 8.3%), corresponding to calcareous sandy shale. No difference of chemical compositions including trace elements and REE is in the matrices between the Hwanggangri and the Kunjasan Formations. Carbonate rocks from the Okchon zone and outside of the zone range $-2.5{\sim}+6.1$‰ in ${\delta}^{13}C$ and $+5.8{\sim}+25.9$‰ in ${\delta}^{18}O$, indicating normal marine limestone. However, unusally $^{13}C$ enriched carbonate rocks might be deposited in the highly evaporated sedimentary basin. A wide variation of ${\delta}^{18}O$ values is responsible for metamorphism with a $^{18}O$ depleted meteoric water. Isotopic equilibrium temperatures by graphite-calcite geothermometer show a higher metamorphic temperature ($547{\sim}589^{\circ}C$) in the Okchon zone than those ($265{\sim}292^{\circ}C$) in the Samtaesan Formation of the Chosun group. Rhythmic alternation of relatively thin shale with thin limestone in the Kounri Formation is not cherty layer but thin limesilicate bed by metasomatic replacement. Judging from the isotopic and chemical compositions of the carbonate rocks and calcareous matrix of the pebble bearing phyllitic rocks, the Hwangganari Formation was deposited in the shallow marine environment favorable to debris flow.

  • PDF

펄스차이 벗김전압전류법에 의한 텅스텐 중 아연, 카드뮴, 납 및 구리의 미량성분 동시분석 (Simultaneous Determination of Zinc, Cadmium, Lead and Copper in Tungsten Matrix by Differential Pulse Anodic Stripping Voltammetry)

  • 배준웅;이성호
    • 대한화학회지
    • /
    • 제38권2호
    • /
    • pp.146-150
    • /
    • 1994
  • 1.000%(w/v)텅스텐 메트릭스 중에 미량불순물로 존재하는 아연, 카드뮴, 납 및 구리의 동시정량을 펄스차이 벗김전압전류법으로 검토하였다. 지지전해질로는 타르타르산(pH=5.00)을 사용하였다. 사전 농축은 -1.2 volt(vs. Ag/AgCl)에서 3분간이면 충분하였다. 1.000%(w/v)텅스텐 매트릭스 중에서 아연, 카드뮴, 납 및 구리 각 원소의 동시 정량이 가능한 직선 범위는 10 ~ 50 ppb였으며, 3${\sigma}$검출한계는 각각 1.25, 1.02, 1.69, 1.02ppb 로 나타났다. 이 결과는 텅스텐 매트릭스하에서 ICP-AES의 검출한계인 8.0, 5.0, 120, 5 ppb 결과와 비교하여 볼때, 본 방법이 보다 우수한 미량분석방법임을 알 수 있다.

  • PDF

X-Ray Diffractometric Study on Modification Mechanism of Matrixes for Electrothermal AAS Determination of Volatile Lead and Bismuth

  • 김영상;최종문
    • Bulletin of the Korean Chemical Society
    • /
    • 제21권1호
    • /
    • pp.56-60
    • /
    • 2000
  • The mechanism of a matrix modification for the trace determination of volatile lead and bismuth by an electro-thermal atomic absorption spectrophotometry was studied by a X-ray diffractometry (XRD). For the investigation of structures, the ash products of the elements were produced by using a palladium as a matrix modifier with or without aluminum or nickel as an auxiliary modifier. The same charring conditions as in the analysis of samples were applied together with much concentrated solution of analytical elements and modifiers in a graphite furnace to get a large amount of the product for XRD. The XRD patterns showed PbPd3 for lead and BiPd3 for bismuth. These mean that the reaction procedures through the charring and atomization were changed from $Pb^{2+}$ ${\rightarrow}$ PbO ${\rightarrow}$$Pb^0$ to $Pb^{2+}$ ${\rightarrow}$ PbO ${\rightarrow}PbPd_3$ ${\rightarrow}$ Pb o for lead and from $Bi^{3+}$ ${\rightarrow}$ BiO ${\rightarrow}$ Bi o to $Bi^{3+}$ ${\rightarrow}$ BiO ${\rightarrow}$ $BiPd_3$ ${\rightarrow}$ $Bi^0$ for bismuth by the addition of modifiers. The volatile elements were stabilized by the formation of palladium alloys through a charring process. Charring temperatures were raised about 500 $^{\circ}C$ by the alloying and the atomization was also stabilized for the enhancement of sensitivities.

Cellular zinc deficiency inhibits the mineralized nodule formation and downregulates bone-specific gene expression in osteoblastic MC3T3-E1 cells

  • Cho, Young-Eun;Kwun, In-Sook
    • Journal of Nutrition and Health
    • /
    • 제51권5호
    • /
    • pp.379-385
    • /
    • 2018
  • Purpose: Zinc (Zn) is an essential trace element for bone mineralization and osteoblast function. We examined the effects of Zn deficiency on osteoblast differentiation and mineralization in MC3T3-E1 cells. Methods: Osteoblastic MC3T3-E1 cells were cultured at concentration of 1 to $15{\mu}M$ $ZnCl_2$ (Zn- or Zn+) for 5, 15 and 25 days up to the calcification period. Extracellular matrix mineralization was detected by staining Ca and P deposits using Alizarin Red and von Kossa stain respectively, and alkaline phosphatase (ALP) activity was detected by ALP staining and colorimetric method. Results: Extracellular matrix mineralization was decreased in Zn deficiency over 5, 15, and 25 days. Similarly, staining of ALP activity as the sign of an osteoblast differentiation, was also decreased by Zn deficiency over the same period. Interestingly, the gene expression of bone-related markers (ALP, PTHR; parathyroid hormone receptor, OPN; osteopontin, OC; osteocalcin and COLI; collagen type I), and bone-specific transcription factor Runx2 were downregulated by Zn deficiency for 5 or 15 days, however, this was restored at 25 days. Conclusion: Our data suggests that Zn deficiency inhibits osteoblast differentiation by retarding bone marker gene expression and also inhibits bone mineralization by decreasing Ca/P deposition as well as ALP activity.

증강현실 구현을 위한 Multi-Marker에 관한 기법 (Techniques on Multi-Marker for the Implementation of Augmented Reality)

  • 김학희
    • 한국컴퓨터정보학회논문지
    • /
    • 제15권11호
    • /
    • pp.109-116
    • /
    • 2010
  • 본 논문에서는 가상과 현실을 이어주는 하나의 방법인 마커(Marker)인식방법에서 멀티마커방법을 사용하여 복잡한 환경이나 또는 손으로 가려지는 현상에서도 추적이 가능한 기법을 제안한다. 기존의 마커인식 방법은 한 개의 마커에만 의존하기 때문에 마커가 가려짐 현상에서 객체가 깜박이는 현상을 볼 수 있는데 이 시스템에서 마커가 가려지더라도 여러 개의 마커가 가려진 마커를 대신함으로써 증강된 객체가 나타남을 확인 할 수 있다. 이러한 기술을 구현하기 위해 관점 매트릭스(perspective matrix)를 이용한 멀티 마커 추정 방법으로 다른 연산이 없기 때문에 빠르게 추정 할 수 있는 것이 특징이다. 구현된 기술은 영상으로부터 다양한 환경에서 마커를 인지하고 위치를 추정하는 기술로써 다양한 환경에서 3차원 객체를 표현 할 수 있다.