• Journal of the Korea Organic Resources Recycling Association
• /
• 제4권1호
• /
• pp.13-21
• /
• 1996

For treating tannery wastewater containing high sulfate and heavy metals, test was performed to assess their performance, competition between SRB (sulfate reducing bacteria) and MPB (methane producing bacteria), and the activity of MPB according to change of chromium concentrations. COD removal efficiency was above 70% at VLR (volumetric loading rate) of 2.0 gCOD/I.day and HRT (hydraulic retention time) of 18hrs at $35^{\circ}C$. In the competition between SRB and MPB, about 15% of the removed COD was utilized by SRB in the begining, but it became 43% at the end. It indicated that MPB was strongly suppressed by the occurrence of significant sulfate reduction since a large electron flow was uptaken by SRB. For the entire experiment, removal efficiencies of chromium concentration were more than 90%. Despite high removal efficiencies of chromium concentration, performance of reactor did not change significantly during the experimental periods. Expecially, chromium (III) is tannery wastewater is less toxic than chromium (VI).

• Journal of the Korean Chemical Society
• /
• 제42권1호
• /
• pp.28-35
• /
• 1998

Microorganisms such as alga are able to uptake toxic and heavy metal ions. After Cd(Ⅱ) was preconcentrated on the carbon paste electrode constructed by incorporating alga (Anabaena), it was determined with differential pulse anodic stripping voltammetry. A well-defined oxidation peak of Cd(Ⅱ) was obtained at - 0.75 V vs. SCE. We investigated the optimum conditions using the peak, which are the effect of the amount of alga, pH, ionic strength, temperature, and preconcentration time on the preconcentration of Cd(Ⅱ) and that of the reduction time and potential on the reduction of Cd(Ⅱ) preconcentrated. Calibration curve for the determination of Cd(Ⅱ) was linear over the range of $1.0{\times}10^6\;M\;to\;8.0{\times}10^6$\;M (R=0.9978) and the detection limit was $5.0{\times}10^{-7}$\;M. The relative standard deviation was 3.1% (n=6) for $7.0{\times}10^{-6}\;M Cd(Ⅱ). In regeneration of the electrode surface with 0.1 M HCl, the response was reproducible continuously by 10 times.

• Korean Journal of Environmental Biology
• /
• 제27권4호
• /
• pp.353-362
• /
• 2009

This study attempted to compare the litter decomposition rate of Arundinella hirta and Miscanthus sinensis var. purpurascens which collected from serpentine soil acting potentially toxic concentration of heavy metals and non-serpentine soil by using the microcosm method for 192 days under constant humidity and $23^{\circ}C$. The contents of Ni, Fe, Mg and Cr in the serpentine and nonserpentine soil originated litter showed high differences between them. The litter samples from serpentine site have lower C/N than non-serpentine litter, but the soluble carbohydrate content was shown almost similar between two plant litter. The mass loss rates of leaf litter from serpentine area were slower than those from non-serpentine site. During the experimental period, the remained dry weight of A. hirta and M. sinensis var. purpurascens litter collected from serpentine site were 64.7%, 65.0% of initial dry weight and litter samples from non-serpentine site showed 54.2%, 50.7%, respectively. K and Na were leached rapidly at the initial decomposition periods, but Ca showed immobilization and other metal elements reserved at the decomposing litter for a long time. The decomposing A. hirta litter from non-serpentine soil showed higher values of $CO_2$ evolution, microbial biomass-C, and microbial biomass-N than those in serpentine soil originated litter acting nutrient stresses and exhibited rapid decay rate. The microbial biomass and microbial respiration of decaying litter were positively correlated with litter decomposition rate, and these relationships showed more rapid slope in non-serpentine soil originated litter than that in serpentine soil.

• Journal of Fashion Business
• /
• 제16권3호
• /
• pp.13-31
• /
• 2012

The purpose of the study was to analyze the work clothes' clothing comfort and wearer mobility of painting workers with the consideration of the work environment features in the machine and shipbuilding industries in South Korea. A questionnaire survey was conducted for the study, which consisted of questions on the clothing comfort and wearer mobility aspects of painting work clothes by clothes types and body parts. The work clothes' clothing comfort and wearer mobility levels were scaled in 5 points i.e. 1(: very tight/very uncomfortable) to 5(: very slack/very comfortable). The painting work environmental hazardous features were considered as high impact levels of workplace temperature, oxygen deficiency, organic solvent, toxic gas factors while metal fragment factor only impacts 'low' in the painting processes with the findings throughout this study. Since the painting work consisted of surface washing and the spray and touch-up painting processes, which was carried out in an outdoor work place, the painting work clothes should meet high performance of waterproofing from the painting material and air permeability specially in summer as well as thermal performance in winter. The subjects painting workers' assessment of the existing work clothes' clothing oppression was in the levels between 3 (i.e. moderate) and 4 (i.e. comfortable) in a range of 1 to 5 points. The existing painting work clothes' wearer mobility was evaluated 'very uncomfortable' in all work clothes parts, especially, armhole length, biacromial breadth, sleeve length of the jumper; and body rise, waist, hip, thigh and knee circumferences of the pants.

• Korean Journal of Veterinary Research
• /
• 제34권3호
• /
• pp.635-645
• /
• 1994

The environmental pollution by heavy metals has become a significant hygenic problem. Recently it is said the garlic supplementation in diet have protective effect on the heavy metal accumulation in tissue of rat by a researcher. In this study two experiments were undertaken. Firstly, dogs were fed diet supplemented with cadmium of cadmium plus 7% of raw garlic for 50 days. on the 50th day of experiment all dogs were euthanasied and the cadmium content of various tissue were measured by atomic absorption spectrophotometeric method. Secondly, in order to find out the toxic effect of garlic dogs were fed diet supplemented with 7% of raw garlic for 50 days and hematological or hematochemical observations were undertaken at 10 day intervals. The results obtained from these experiments were summarized as follows; 1. In dogs treated with cadmium and cadmium plus garlic cadmium was accumulated in renal cortex, liver, and muscle. However the concentrations of cadmium showed no significant between the two group. 2. In dogs fed diets supplemented with 7% of raw garlic significant decrease of erythrocyte count, packed cell volume and hemoglobin content and significant increase of Heinz body erythrocyte and reticulocyte count were recognized. 3. The garlic-treated dogs and control dogs had normal asparate aminotransferase, alanine aminotransferase, alkaline phosphotase, blood urea nitrogen value. The value showed no significant difference between the two group. 4. From these results it may be concluded that the garlic have protective effect for cadmium accmulation in tissue and excess garlic in diet could induce hemolytic anemia in dogs.

• Korean Journal of Materials Research
• /
• 제20권11호
• /
• pp.623-627
• /
• 2010

Semiconducting metal oxides have been frequently used as gas sensing materials. While zinc oxide is a popular material for such applications, structures such as nanowires, nanorods and nanotubes, due to their large surface area, are natural candidates for use as gas sensors of higher sensitivity. The compound ZnO has been studied, due to its chemical and thermal stability, for use as an n-type semiconducting gas sensor. ZnO has a large exciton binding energy and a large bandgap energy at room temperature. Also, ZnO is sensitive to toxic and combustible gases. The NO gas properties of zinc oxide-single wall carbon nanotube (ZnO-SWCNT) composites were investigated. Fabrication includes the deposition of porous SWCNTs on thermally oxidized $SiO_2$ substrates followed by sputter deposition of Zn and thermal oxidation at $400^{\circ}C$ in oxygen. The Zn films were controlled to 50 nm thicknesses. The effects of microstructure and gas sensing properties were studied for process optimization through comparison of ZnO-SWCNT composites with ZnO film. The basic sensor response behavior to 10 ppm NO gas were checked at different operation temperatures in the range of $150-300^{\circ}C$. The highest sensor responses were observed at $300^{\circ}C$ in ZnO film and $250^{\circ}C$ in ZnO-SWCNT composites. The ZnO-SWCNT composite sensor showed a sensor response (~1300%) five times higher than that of pure ZnO thin film sensors at an operation temperature of $250^{\circ}C$.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• 제18권1호
• /
• pp.58-63
• /
• 2010

Introduction : Head trauma is the main cause of death in aircraft crash. In a Michigan study of structurally survivable, fatal accidents, 80% of the fatally injured had received head trauma. We tried to develop a new helmet for passengers, and perform its efficiency test. Methods : An aircraft helmet requires an excellent protection against head trauma, lightness, and small volumes. In addition, it must be wearable, fire resistant, and non toxic when it is burning. We developed two new helmets made from silicone foam which met all theses requirements. One was thin (2.5cm), and the other was thick (6.3cm). These looked like a motorcycle helmet and had only a soft silicone as liner material without an outer hard shell. Therefore we can carry them easily inside aircrafts. The standard test for helmet is Snell's drop test. It measures the impact acceleration of head shaped metal wearing helmet during we drop it at certain heights. Impact sites were total 5 sites (front, back, right, left and top) for each helmet. All these sites were impacted twice. Results : The thickness of impact sites varied from 2.5cm to 6.3cm. The impact acceleration of 2.5cm thickness site when it was dropped from 1.0 meter was 379g. But, that of 6.3cm thickness site when it was dropped from 1.5 meter was only 163g. Unfortunately, both helmets didn't meet the Snell Standard for motorcycle helmets. Discussion : If we add suitable outer hard shell, and change its thickness and design, the efficiency will be increased. A study indicated that helmet could reduce the risk of head trauma up to 85%. We made helmet for passengers in aircraft crash for the first time. If we improve its weak points, it will decrease the frequency of head trauma in aircraft craft.

• Journal of Environmental Health Sciences
• /
• 제39권5호
• /
• pp.391-407
• /
• 2013

Micropollutants emerge in surface water through untreated discharge from sewage and wastewater treatment plants (STPs and WWTPs). Most micropollutants resist the conventional systems in place at water treatment plants (WTPs) and survive the production of tap water. In particular, pharmaceuticals and endocrine disruptors (ECDs) are micropollutants frequently detected in drinking water. In this review, we summarized the distribution of micropollutants at WTPs and also scrutinized the effectiveness and mechanisms for their removal at each stage of drinking water production. Micropollutants demonstrated clear concentrations in the final effluents of WTPs. Although chronic exposure to micropollutants in drinking water has unclear adverse effects on humans, peer reviews have argued that continuous accumulation in water environments and inappropriate removal at WTPs has the potential to eventually affect human health. Among the available removal mechanisms for micropollutants at WTPs, coagulation alone is unlikely to eliminate the pollutants, but ionized compounds can be adsorbed to natural particles (e.g. clay and colloidal particles) and metal salts in coagulants. Hydrophobicities of micropollutants are a critical factor in adsorption removal using activated carbon. Disinfection can reduce contaminants through oxidation by disinfectants (e.g. ozone, chlorine and ultraviolet light), but unidentified toxic byproducts may result from such treatments. Overall, the persistence of micropollutants in a treatment system is based on the physico-chemical properties of chemicals and the operating conditions of the processes involved. Therefore, monitoring of WTPs and effective elimination process studies for pharmaceuticals and ECDs are required to control micropollutant contamination of drinking water.

• Resources Recycling
• /
• 제17권2호
• /
• pp.30-35
• /
• 2008

Mixed acidophilic bacteria were approached for leaching of cobalt and lithium from wastes of lithium ion battery industries. The growth substrates for the mixed mesophilic bacteria are elemental sulfur and ferrous ion. Bioleaching of the metal was due to the protonic action of sulfate ion on the metals present in the waste. It was investigated that bioleaching of cobalt was faster than lithium. Bacterial action could leach out about 80 % of cobalt and 20 % of lithium from the solid wastes within 12 days of the experimental period. Higher solid/liquid ratio was found to be detrimental for bacterial growth due to the toxic nature of the metals. At high elemental sulfur concentration, the sulfur powder was observed to be in undissolved form and hence the leaching rate also decreased with increase of sulfur amount.

• Ocean and Polar Research
• /
• 제25권1호
• /
• pp.21-30
• /
• 2003

Seasonal fluctuations of physico-chemical and biological aspects of the environment were studied in Vladivostok harbour (Golden Horn Bay, the East Sea/Sea of Japan). The benthic community structure was described with a focus on size-spectra (bacteria, meio- and macrofauna) related with the chemical environment and chemical fluxes in sediment and to reveal their possible ecological role in the process of bioremediation of the environment. Samples from two sites with different concentrations of heavy metals (Fe, Zn, Cu, Pb, Mn, Cr, Ni Cd, Co) and petroleum hydrocarbon were assessed by a number of methods. These included plate counts of culturable bacteria, observation through a scanning electron (SEM) and transmission electron microscope (TEM). These approaches were complemented with microscopic assessments of the diversity of the benthic community. The specific communities had a limited number of species, tolerant to abnormally high levels of toxic compounds. The dominant species were presented by several sho.1-lived small polychaetes (Capitella capitata) and nematodes (Oncholaimium ramosum). The highest population density was recorded in microbenthos, in various diatoms, various physiological groups of bacteria which participate in biomineralization: marine heterotrophic bacteria, which oxidized oil, black oil in addition to groups resistant to heavy metals. They have the entire set of mechanisms for neutralizing the negative effect of those compounds, forming the detrital food web and biogeochemical circulation of material in sediments, which results in the biological self-recycling of sea basins. Macro- and meiobenthic organisms were more sensitive to a greater extent of $H_2S$ and petroleum hydrocarbons than to metal content, but the within-site rankings were the same as those achieved for microbiological analyses.