• 한국방재학회 논문집
• /
• 제9권6호
• /
• pp.111-117
• /
• 2009

토사유출량 산정을 위하여 국내 실무에서는 RUSLE 공식이 대부분 사용되고 있다. 그러나 이 공식의 각 매개변수에 대한 국내의 검증은 거의 이루어지지 않았다. 본 연구에서는 RUSLE 공식의 매개변수 중 강우침식능 인자에 대한 특성을 분석하였다. 강우침식능 인자는 강우의 총에너지와 30분 최대 강우의 곱으로 표현된다. 본 연구에서는 먼저 강원지역 시험유역의 토사유출량 관측자료를 활용하여 10개의 강우에너지 산정식의 특성을 검토하였으며, 총강우량, 최대 강우강도, 총 에너지, 토사유출량과의 상관관계를 분석하여 각 공식의 국내 적용성을 검토하였다. 또한 9년 동안의 10분 단위의 강우자료를 이용하여 강릉지역 30분 강우강도와 60분 강우강도의 관계를 제시하였다.

• 공업화학
• /
• 제29권4호
• /
• pp.446-451
• /
• 2018

플라보노이드성분 함량이 높은 밀싹을 이용하여 유효성분을 추출하고, 중심합성계획모델을 이용하여 추출공정을 최적화하였다. 중심합성계획모델의 반응치로는 추출수율과 플라보노이드성분 함량을 설정하고, 독립변수인 추출시간, 주정/초순수 부피비, 추출온도에 따른 주효과도와 교호효과도를 해석하였다. 추출수율의 경우 추출시간과 추출온도가 상대적으로 큰 영향을 미쳤으며, 플라보노이드성분 함량의 경우에는 추출시간의 영향이 가장 크게 나타났다. 추출수율과 플라보노이드성분 함량을 모두 고려한 결과 최적추출조건은 추출시간(2.44 h), 주정/초순수의 부피비(50.00 vol%), 추출온도($54.41^{\circ}C$)이었으며, 이때 추출수율은 30.14 wt%, 플라보노이드성분 함량은 $35.37{\mu}g\;QE/mL\;dw$이었다. 이 조건의 실제 실험결과 추출수율(29.92 wt%), 플라보노이드성분 함량($35.32{\mu}g\;QE/mL\;dw$)으로 오차율은 각각 0.39%, 0.74%이었다. 이는 두 개의 반응치를 동시에 분석하는 다중분석 종합분석임에도 높은 정확도를 나타낸 것으로 본 연구에서의 최적화과정 신뢰도가 우수한 것으로 사료된다.

• 대한수의학회지
• /
• 제41권2호
• /
• pp.243-252
• /
• 2001

Milk constituents and somatic cell count (SCC) were analysed for 4,059 milk samples from 178 dairy farms from April to December in 1999. Correlations among each milk constituents, milk urea (MU) concentration and SCC in association with lactation stage, milk yield and parity, and balancing status of nutrients' supplies were analysed, and the results are summarized as follows; Averages of milk fat percent, total solids percent and milk yield were $3.72{\pm}0.91%$, $12.50{\pm}1.31%$ and $23.80{\pm}8.54kg$, respectively, whereas those were significantly lower during the summer season. In contrast, average of MU concentration was $0.0361{\pm}0.0006%$ which was significantly higher during the summer season. With milk yield, concentrations of fat, protein and SCC in milk decreased but concentrations of lactose and urea in milk and body condition score (BCS) were not altered. Concentrations of fat, protein, lactose, total solids, SNF, and urea in milk were significantly affected by stage of lactation ($P{\leq}0.0001$) but SCC was not changed. Parity of dairy cows had a significant effect on concentrations of fat ($P{\leq}0.02$), lactose ($P{\leq}0.0001$), total solids ($P{\leq}0.002$), and SNF ($P{\leq}0.0001$) in milk and milk yield ($P{\leq}0.0005$) but did not change concentrations of urea and protein in milk. Somatic cell count had significant positive correlationship with percentages of fat, protein and total solids ($P{\leq}0.0001$), respectively, but had negative correlationship with percentages of urea and lactose in milk and milk yield ($P{\leq}0.0001$). Milk urea concentration was negatively correlated with concentrations of protein, fat, total solids, and SNF in milk and milk yield ($P{\leq}0.0001$) and, according to regression analysis using milk urea concentration and SCC, following equation was obtained; $Y(MU)=3.688{\times}10^{-2}-4.04{\times}10^{-7}{\times}X(SCC{\times}1,000)(r^2=0.0038$, $P{\leq}0.0001$). We studied balance between protein and energy supplies to dairy cows in each farm based upon milk urea and protein concentrations, and results showed that 137 of total 178 farms fed cows unbalanced amounts of dietary protein and energy.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.348-348
• /
• 2017

This experiment was conducted to investigate the aspect of tiller occurrence, growth and yield of sorghum according to planting density and sowing date. The subject of this experiment is to supply basic data to inhibit non-productive tillers uneconomical and cumbersome for mechanical harvesting. Also another subject was to evaluate optimum planting density and sowing date in central district area. Total number of tillers was more in 80cm ridge than 60cm ridge and it was increased as the planting distance was wider from 15cm to 30cm on the each ridge. Ratio of effective tillers was higher in 60cm ridge than 80cm ridge and it was decreased as planting distance was wider from 15cm to 30cm. The lower the planting density, the more increased total number of tillers, whereas effective tillers were decreased as planting density was high. Average of total number of tillers of three varieties was higher in sowing date of 2 May (1st sowing date), whereas ratio of effective tillers was the highest in sowing date of 23 May (2nd sowing date). Hwanggeumchal showed the highest total number of tillers (1.2 tillers), while Moktaksusu had the lowest total number of tillers (0.8 tillers) among three varieties. There were no significant difference between planting density and days to heading and ripening date from seeding. Culm length increased as planting density was high, but ear length, grains per ear and 1000 grain weight were decreased on the other hand. The highest yield of sorghum per 10a was obtained from $60{\times}20cm$ planting density among 6 planting densities.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권3호
• /
• pp.309-314
• /
• 2006

The present investigation was undertaken to study the milkability characteristics of Holstein cows. Out of 6,660 initial records 4,607 records were finally included in the analysis after deleting some records with an abnormal range of values for the traits considered. These 4,607 Holstein cows belonged to a total of 122 herds located in a province in Korea. The 'LactoCorder' instrument was used to electronically record the milkability traits at the milking parlor. A total of 19 traits were studied which were broadly classified into milk yield, milking speed, milking time and the electrical conductivity related traits. The SAS 9.1 statistical software was used to carry out analyses. The average maximum milk flow per minute was 3.21 kg/min, while the average milking speed during the main milking process (DMHG) had a mean value of 2.30 kg/min. The total milk yield was 14.14 kg, 62% of which was milked during the first three minutes of the milking. The average total milking time was 8.23 min. Among the three phases of the main milking process, the time of stable milk flow had the longest time (2.97 min) followed by the time at the decline phase (2.62 min). The average time taken to reach the plateau phase was 1.08 min, which can still be reduced further through improved managemental practices. Among milk yield traits, milk yield during the first two (MG2) and three (MG3) minutes of milking had high positive correlation with milking speed traits and negative correlations with almost all the milking time traits except time of incline in milk flow from 0.5 kg/min till the attainment of the plateau phase (tAN). Milking speed traits had negative correlations with total milking time, time at main milking process, time at plateau and with the time at decline. Since there was medium to high negative correlation between the milking speed and the time at plateau, there is a need for selection of cows which have intermediate milking speed so that it could require less milking time and also the optimum (higher and longer) plateau time. Proper pre-stimulation and avoiding over milking will help in further reducing the milking time and thus will add to the net profit of the farmer.

• Journal of Animal Science and Technology
• /
• 제63권5호
• /
• pp.1086-1097
• /
• 2021

This study examined the impact of using total mixed ration (TMR) and concentrate on feed intake, daily gain, carcass yield grade, and carcass quality grade of Hanwoo steers and its subsequent economic efficiency. Thirty six 7-month-old Hanwoo steers were assigned to one of the four treatment groups, and each group was divided into three repeated pens, with each repeated pen comprising three steers. The treatment groups were: 1) separate feeding with commercial concentrate and forage (namely, SCF) for the entire experimental period; 2) TMR feeding for a growing period followed by SCF for the early and late fattening period (namely, TMRGSCF); 3) TMR feeding for growing and an early fattening period followed by SCF for the late fattening period (namely, TMREFSCF); and 4) TMR feeding for the entire experimental period (namely, TMRW). The results showed that the SCF treatment had significantly (p < 0.05) higher feed intake during the growing period than other treatments. In contrast, the total feed intake had little difference during early and late fattening as well as the whole period regardless of feeding strategies. Daily gain showed no difference during the growing period. However, it was significantly higher in SCF and TMREFSCF treatments for the early and late fattening period, respectively (p < 0.05). The daily gain during the total raising period is in the order of TMREFSCF > TMRGSCF > SCF > TMRW. Carcass characteristics, including carcass weight, loin eye muscle area, and carcass yield grade, did not significantly differ among different treatments. However, TMRW treatment, wherein TMR was fed for a long time, showed that the cold carcass weight was less compared with other treatments, but carcass yield grade was higher with thinner backfat. Backfat thickness was in the order of SCF > TMRGSCF > TMREFSCF > TMRW, showing that the thickness reduced with longer TMR feeding (p < 0.05). TMRGSCF, which numerically had a higher carcass quality grade, showed higher economic efficiency, whereas SCF showed low economic efficiency. In conclusion, it was more feasible to apply TMR strategy in the growing and early fattening period and then SCF for the early or late fattening period to improve carcass yield, quality grade, and economic efficiency.

• 한국초지조사료학회지
• /
• 제8권1호
• /
• pp.26-32
• /
• 1988

This study was conducted to determine the effects of cutting frequency and cutting height on agronomic characteristics and yield performance of sorghum-sudangrass hybrid, cv. Pioneer 855 F on the experimental field of Livestock Experiment Station, Suweon. The results are summarized as follows: 1. The relative contribution of leaf component to total yield was higher when the plants were cut frequently rather than when defoliated only a few times, and tend to be higher with high cutting. 2. Leaf Area Index (LAI) was the highest at the primary growth of two cutting times scheme and the first regrowth for three or four cutting times a year, but LAI, in general, was not related to cutting height. 3. Crop Growth Rate was the heighest at the first regrowth-plants grown in summer, and it was also related to the amount of stubble left at the previous cut. 4. Dead stubbles were not occurred when plants were cut before heading, but those were accompanied by the frequent and low cutting. 5. Total fresh fodder and dry matter yield were the highest at two times cut a year, and decreased with frequent cutting. The optimum cutting height at two times cut was ca. lOCm height stubble from the ground level, but yield increased with higher level cutting at the three or four times cut a year.

• 한국작물학회지
• /
• 제45권4호
• /
• pp.237-240
• /
• 2000

This experiment was conducted to evaluate the effect of split application of nitrogen(N) on development of vascular bundle(VB) and yield components of rice. Two cultivars were used in this study; IR58, an indica type and Shinunbongbyeim a japonica type. The number and total cross sectional area of the VB in the peduncle and leaf blade were more and bigger in N split application than 100 percent basal fertilizer. Nitrogen split application at necknode differentiation stage increased the number and size of the VB. Nitrogen split application resulted in increased panicle number with application of N before transplanting and at tillering stage; increased spikelets number with N application at necknode differentiation stage; and increased spikelet fertility and 1000 grain weight with N application at necknode differentiation and heading stages. Grain yield increased 7-10% in N split as compared to all basal application. The total cross sectional area of VB in peduncle closely correlated with the number of spikelets per panicle. Nitrogen management can have an impact on spikelet differentiation through more and bigger VB and increase grain yield potential.

• 한국초지조사료학회지
• /
• 제3권2호
• /
• pp.86-91
• /
• 1983

Orchardgrass 단파초지(單播草地)의 최고총생산수량(最高總生産收量)과 질적향상(質的向上)을 위한 수확적기(收穫適期)를 장(張) (1971)의 총생산수(總生産收) 양식(量式)에 의하여 이론적(理論的)으로 분석(分析) 연구(硏究)하였다. Orchardgrass초지(草地)의 형태학적(形態學的) 특징(特徵)으로 0% 개화기(開花期)에 목확(牧穫)하는 것이 IDV와 CP의 높은 수준(水準)과 함께 최대건물생산량(最大乾物生産量)을 달성(達成)할 수 있다는 것으로 판단(判斷)되었다. 그러나 orchardgrass는 1차예취후(次刈取後)에는 개화(開花)하지 않기 때문에 그 이후(以後)에는 극대치(極大値)의 감치기로 대치(代置)할수 있다고 판정(判定)되었다.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제7권1호
• /
• pp.45-49
• /
• 2003

Foliar treatment with different concentrations of potassium chloride (KCl) to mulberry plants resulted in higher level of total chlorophyll, total sugars, soluble protein, in vivo nitrate reductase activity (NRA), net photosynthetic rate (NPR), pWUE and leaf yield. Optimal concentration was found to be 10.0 mM KCl with limited irrigation provided in the mulberry plantation planted in 90 ${times}$ 90 cm spacing. The deleterious effect of soil moisture stress condition has been found to be overcome by KCl foliar spray twice at 15 days interval. Regression and correlation coefficients were analyzed, and a strong positive correlation was found between chlorophyll and total sugars, soluble protein and in vivo nitrate reductase activity, leaf dry weight and net photosynthetic rate and pWUE and net photosynthetic rate.