• International Journal of Highway Engineering
• /
• v.17 no.2
• /
• pp.79-87
• /
• 2015

PURPOSES: According to accident statistics for road built in 2004, the ratio of accidents on frozen roads to normal roads is 0.9%, whereas the fatality ratio is 2.7%. The risk of accidents on frozen roads is very high. Measures taken every year to prevent traffic accidents of frozen roads in the winter season are still insufficient. Additionally, measures have been established mainly on rural roads. Therefore, for urban roads, analyses and measures to prevent accidents are lacking. In this study, data on accidents on frozen roads was used to search for the causes behind these accidents and measures to reduce accidents have been recommended. METHODS: In this study, collected data from the TAMS (Traffic Accident Management System), which were collected by the Seoul National Police Agency was used. The data were divided into vehicle, people, and condition of road. The analytical model used here was the Logistic Regression Model, which is frequently used for traffic safety and accident analysis. This study uses the odds ratio analysis to search for variables related to frozen road traffic accidents in each category. A total of 18 out of 47 variables were found to be the causes of accidents. RESULTS: From the results of the comparative analysis of 18 variables, the category of the condition of the road was found to be the most critical. Contrary to expectations, more accidents occurred in clear weather than in other conditions. Accidents on bridges occurred frequently, and its odds ratio was the highest compared with other road types. When BPT is operated, the probability of accidents on frozen roads is lower than in general conditions, and accidents occurred frequently on roads with less than four lanes. CONCLUSIONS : Based on the results of this study, suggestions for reducing the risk of future domestic road accidents in freezing conditions are indicated as follows. First, it is necessary to perform a technical review of the urban road traffic accidents caused by frozen roads. Second, it is necessary to establish criteria for the study of the road environment based on the major causes of road accidents on frozen roads. Third, improvements in urban road environmental factors should be made.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.4
• /
• pp.137-146
• /
• 1999

Inspection becomes to be important in the safety of structure and economical viewpoint, because structural damage accompanies lots of economical cost and social problems. Especially ship structure is composed of a lot of members and it is impossible to inspect all members continuously. The purpose of this paper is to get optimal inspection plan containing inspection time and method. Crack is one of major modes on the structural failure and can lead to collapse of structure. In this paper, the deteriorating process, which contains inspection to detect the crack before the propagation to large crack, is idealized as Markov chain model. Genetic algorithm is also used to accomplish the optimization of inspection plan. Especially, the probabilistic characteristics of cracks are changed, because ship is operating in corrosive environments and the scantling of structural members is reduced due to corrosion. Non-stationary Markov chain model is used to represent the process of corrosion in structural members. In this paper, the characteristics of indivisual inspection plan are compared by numerical examples for the change of corrosion rate, the cost due to scheduled system down and target failure probability. From the numerical example, it can be seen that the improvement of fatigue life for the members with short fatigue life is the most effective way in order to reduce total maintenance cost.

• The Journal of Society for e-Business Studies
• /
• v.26 no.2
• /
• pp.1-17
• /
• 2021

This paper elucidates the effect of characteristics of service quality on continuance usage intention of digital healthcare service using mediating factors of user expectation and user utility. First, we classified independent factors into three types such as service system characteristics, user characteristics, and healthcare service characteristics from the previous studies, and investigated the effect of three independent factors on continuance usage intention of digital healthcare service. Second, we analyzed the impact of two mediating factors, user expectation and user utility, on the continuance usage intention. We developed a research model that includes three types of independent factors, mediated factors of user expectation and user utility, and a dependent factor of continuance usage intention. We surveyed a total of 357 samples from digital healthcare service users and analyzed the research model. The research results significantly show that Characteristics of Users is essential factor impacting a dependent factor of Continuance Usage Intention. The results indicate the followings: (1) Characteristics of Users including the variables of Innovation impacts User Expectation, and User Expectation affects Users Utility, and Users Utility also affects Continuance Usage Intention. (2) Characteristics of Service Systems including the variables of Functionality, Compatibility, and Convenience and Characteristics of users of Innovation variable impact the mediating factor of User Expectation, and User Expectation also affects the factor of Continuance Usage Intention. (3) Characteristics of Healthcare Services including the variables of Reliability, Ease of Operation, Safety, and Accuracy impact User Utility, and User Utility also affects Continuance Usage Intention.

• Journal of Food Hygiene and Safety
• /
• v.30 no.1
• /
• pp.28-34
• /
• 2015

This study is to investigate microbiological hazards which can be used as fundamental data to adequately control leeks hazards and develop leeks GAP model for those who want to get GAP system. The microbiological investigations on cultivation environments (soil and water), crops (leeks), personal hygiene (workers' hands, clothes and gloves) and working tools (boxes) have been conducted for one year, so the period was classified under non-cultivation, cultivation, and post harvest. Total bacteria was detected from soil (4.0~6.7 log CFU/g), leeks (4.6~5.1 log CFU/g), hands (ND~3.3 log CFU/hand) and gloves ($ND{\sim}5.4\;log\;CFU/cm^2$) while nothing was detected from the other samples. The coliform contamination of leeks (4.8~5.0 log CFU/g) was more high than that of soil (3.9~4.2 log CFU/g). In case of foodborne pathogens, only B. cereus was detected at the level of 0.5~4.6 log CFU/g (or hand, $100cm^2$). Fungi was observed at the level of 2.1~3.8 log CFU/g (or hand, $100cm^2$) excepting water and some working tools. These results demonstrate that the contamination of leeks is comparatively higher than that of soil sample. The reason may be the cross-contamination by biological hazards presenting on soil. Therefore, it is necessary to properly control soil and fertilizer for safety against biological hazards.

• Journal of Korean Society of Transportation
• /
• v.21 no.1
• /
• pp.41-49
• /
• 2003

Marine traffic management could be defined as the implementation of managerial technical measures to improve vessel traffic safety. The managerial elements of vessel traffic management for ports and harbours or narrow channels include the total amount of traffic control, the vessel traffic separation scheme, speed restriction, traffic control by signals, the navigation information service and so forth. This research aims to quantify how much the traffic separation schemes(TSS) contribute to the alleviation effect of ship handling difficulty and to propose a design standard when the individual management measure is applied in an actual waterway. Traffic separation schemes have now been established in most of the major routes and congested waters of the world, and the number of collisions and groundings have often been dramatically reduced. In this part, the relationship between the alleviation of ship handling difficulty and the reduction of encounter figures among ships is quantitatively clarified by applying the ES model. As results of simulation analysis, it is recognized that a traffic separation system is most effective in the case of narrow width and heavy traffic volume. The centre buoy installation reduces about 1/4 of the alleviation of ship handling difficulty, TSS establishment 1/3, and design change to one-way traffic from two-way traffic reduces 1/2.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.39.2-39.2
• /
• 2011

The new and renewable energy today has a great interest in all countries around the world. In special it has need more limit of the fossil fuel that needs of low carbon emission among the social necessary conditions. Recently, the high-rise building demand the structural safety, the economic feasibility and the functional design. The high-rise building spends enormous energy and it satisfied the design in solving energy requirements. The requirements of energy for the building depends on the partly form wind energy due to the cladding of the building that came from the surroundings of the high-rise building. In this study of the wind energy, the cladding of the building was assessed a tentative study. The wind energy obtains from several small wind powers that came from the building or the surrounding of the building. In making a cladding the wind energy forms with wind pressure by means of energy transformation methods. The assessment for the building cladding was surrounded of wind speed and wind pressure that was carried out as a result of numerical simulation of wind environment and wind pressure which is coefficient around the high-rise building with the computational fluid dynamics. In case of the obtained wind energy from the pressure of the building cladding was estimated by the simulation of CFD of the building. The wind energy at this case was calculated by energy transform methods: the wind pressure coefficients were obtained from the simulated model for wind environment using CFD as follow. The concept for the factor of $E_f$ was suggested in this study. $$C_p=\frac{P_{surface}}{0.5{\rho}V^{2ref}}$$ $$E_c=C_p{\cdot}E_f$$ Where $C_p$ is wind pressure coefficient from CFD, $E_f$ means energy transformation parameter from the principle of the conservation of energy and $E_c$ means energy from the building cladding. The other wind energy that is $E_p$ was assessed by wind power on the building or building surroundings. In this case the small wind power system was carried out for wind energy on the place with the building and it was simulated by computational fluid dynamics. Therefore the total wind energy in the building was calculated as the follows. $$E=E_c+E_p$$ The energy transformation, which is $E_f$ will need more research and estimation for various wind situation of the building. It is necessary for the assessment to make a comparative study about the wind tunnel test or full scale test.

• Fire Science and Engineering
• /
• v.18 no.1
• /
• pp.54-66
• /
• 2004

In this article, we are to suggest the hazard-assessing method for the underground pipelines, and find out the pipeline-maintenance schemes of high efficiency in cost. Three kinds of methods are applied in order to refer to the approaching methods of listing the hazards for the underground pipelines: the first is RBI(Risk Based Inspection), which firstly assess the effect of the neighboring population, the dimension, thickness of pipe, and working time. It enables us to estimate quantitatively the risk exposure. The second is the scoring system which is based on the environmental factors of the buried pipelines. Last we quantify the frequency of the releases using the present THOMAS' theory. In this work, as a result of assessing the hazard of it using SPC scheme, the hazard score related to how the gas pipelines erodes indicate the numbers from 30 to 70, which means that the assessing criteria define well the relative hazards of actual pipelines. Therefore. even if one pipeline region is relatively low score, it can have the high frequency of leakage due to its longer length. The acceptable limit of the release frequency of pipeline shows 2.50E-2 to 1.00E-l/yr, from which we must take the appropriate actions to have the consequence to be less than the acceptable region. The prediction of total frequency using regression analysis shows the limit operating time of pipeline is the range of 11 to 13 years, which is well consistent with that of the actual pipeline. Concludingly, the hazard-listing scheme suggested in this research will be very effectively applied to maintaining the underground pipelines.