• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1390-1393
• /
• 2006

The transmittance of bare glass was enhanced up to about 20% by coating it with a PMMA (Poly Methyl Meta Acrylate) film mixed with silica gel. This lowrefractive- index film greatly reduces total reflection inevitable for bare glass, and thus will be useful for increasing the coupling-out efficiency of OLED.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.191-196
• /
• 2000

본 논문에서는 공조용 소음기에 대한 삽입손실 및 압력손실과 같은 음향성능 평가를 위해 필요한 제반 사항을 ISO 7235에 근거하여 소개하였다. 이를 위해 시험설비의 종류 및 구비조건, 측정방법, 측정시 유의사항 등을 기술하였고, 이로서 공조용 소음기의 보다 정확한 음향성능평가가 이루어지도록 검토 하였다.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.544-546
• /
• 1995

Tunneling of an electron non-normally incident on a potential barrier is theoretically studied. Tunneling time and the position where an electron appears after the tunneling are derived using the phase time approach. The positions where photons appear after two-dimensional tunneling in a frustrated total internal reflection structure are also discussed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1412-1414
• /
• 2009

It is suggested that the light extraction efficiency of the display device can be improved by adoption of periodic array of sub-wavelength scale structures. The relief of the total reflection has been investigated using the rigorous coupled wave analysis (RCWA). Various shape of the sub-wavelength scale structure allowed to have non vanishing transmittance for the light rays with the incident angle bigger than the critical angle.

• Electronics and Telecommunications Trends
• /
• v.10 no.1 s.35
• /
• pp.113-122
• /
• 1995

현재 발표된 공간 광스위치 구조들은 전자 스위치 및 전자 통신 분야에서 많이 이용된 Clos, Benes, Banyan, omega, shuffle network 등을 directional coupler switch, TIR(total internal reflection) switch, cross X switch 등 여러가지 단위 광스위치를 이용하여 고안한 것으로 서로 다른 장단점을 갖고 있다. 따라서 4 X 4나 8 X 8, 또는 그 이상의 확장된 광스위치를 제작하기 위해서는 이러한 기존 구조에 대한 조사 및 분석이 선행되어야 한다. 본 논문은 현재 개발되어 발표된 광스위치의 구조들을 조사하여 특성을 비교하였다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.07a
• /
• pp.381-382
• /
• 2008

• Journal of the Optical Society of Korea
• /
• v.3 no.1
• /
• pp.10-14
• /
• 1999

Via THz Time domain spectroscopy, the characterization of high conductive n-type, 1.31Ω cm silicon can be measured by directly analyzing the multiple reflections using Fabry-Perot theory. The magnitude and phase difference of total transmission show good agreement between theoretical and experimental values over a 2.5 THz frequency range with complex index of refraction and power absorption. The measured absorption and dispersion are strongly frequency-dependent, and all of the results are well fit by a Cole-Davidson type distribution.

• Journal of Auto-vehicle Safety Association
• /
• v.11 no.4
• /
• pp.16-21
• /
• 2019

In recent years, most automobile manufacturers have been using slim light source images to imprint their own brand image and identity. A light guide type lamp is widely used for making these kinds of a slim light source image. A light guide lamp means using a light emitting diode light source at one end of a long cylindrical pipe. The light from the light emitting diode source moves through the pipe by total reflection principle. Moving light is sent forward by various optic structures which is applied in the cylindrical pipe. However, the light guide lamp has a problem that the image of the light differs depending on the viewing direction, and in some cases there is dark section. It means light guide has low quality about lighting image. In this paper, trying to improve the fundamental problems of the light guide mentioned above by using various triz methods. Through functional modeling, estimating the factors affecting the light in the light guide lamp and make various ideas to improve the lighting image using the chain effect cause analysis, function oriented search scientific database techniques. Using these kinds of various TRIZ methods, finally find solutions that can improve the brightness and lighting uniformity of the light guide lamp. The ideas obtained in this paper were applied to actual vehicle development, and several patents achievements were obtained. In conclusion, it is proved that TRIZ method is useful for making ideas in actual automobile industrial field and is also a useful method for acquiring patent.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.1
• /
• pp.564-569
• /
• 2021

In this paper, for the typical LED and the tilted LED, when there is no electrode, when 20% absorption (80% reflection) occurs at the electrode, and when 60% absorption (40% reflection) occurs at the electrode, the effect of the absorption at the electrode and the height of the active region on the photon extraction efficiency and the mean photon path length was investigated, and an appropriate height of the active region was proposed. In a typical LED, as the absorption of the electrode increases, the photon extraction efficiency decreases from 18% to 15% and 13%, and the photon extraction efficiency is highest when the height of the active area is located in the center between the two electrodes. In the tilted LED, as the absorption of the electrode increases, the photon extraction efficiency decreases from 38% to 33% and 25%, and the photon extraction efficiency is highest when the height of the active area is located in the center between the two electrodes. The tilted LED can increase the photon extraction efficiency more than twice than that of a typical LED, where photons are trapped inside the chip due to total reflection.

• Computers and Concrete
• /
• v.33 no.5
• /
• pp.621-630
• /
• 2024

This study presents novel electromagnetic wave-based methods for evaluating the integrity of cement-based structures using time domain reflectometry (TDR). Two cement-based plates with embedded rebars are prepared under sound and defective conditions. TDR tests are carried out using transmission lines with various numbers of artificial joints, and electromagnetic waves are measured to assess the integrity of the plates. The experimental results show that the travel time of electromagnetic waves is consistently longer in sound plates than in defective ones, and an increase in the reflection coefficients is observed in the defect zone of the defective plates. Electromagnetic wave velocities are higher in the defective plates, especially when connectors are present in the transmission line. A novel approach based on the area of the reflection coefficient provides larger areas in the defective plates, and the attenuation effect of the electromagnetic waves induces a difference in the areas of the reflection coefficient between the two defect conditions. An alternative method using the centroid of the defect zone slightly overestimates the location of the defect zone. The length of the defect zone is estimated using the defect ratio and wave velocities of cement, air, and plate. The length of the defect zone can also be calculated using the travel times within the plate, total measured length of the plate, and wave velocities in the cement and air. Therefore, the electromagnetic wave-based methods proposed in this study may be useful for estimating the location and length of defect zones by considering attenuation effects.