• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.1
• /
• pp.58-64
• /
• 2012

Purpose: Dental emergencies vary from toothaches to oral and maxillofacial traumas. Because the number of dental emergency cases has increased recently, we analyzed characteristics of patients seen during the last 2 years, in an effort to find a trend. Methods: This study was carried out with emergency room patients visiting the Department of Oral and Maxillofacial Surgery from 2009 to 2010. Results: The total number of patients studied was 1,162; the ratio of males to females was 1.73:1. The most frequent age group was 0 to 9 years, followed by 20 to 29 years. Trauma (58.7%) was the most frequent cause followed by acute toothache, oral hemorrhage, infection, and temporomandibular (TMJ) disorder. In the trauma group, injuries of soft tissue and alveolus were prevalent. The most common causes of soft tissue injury were falls, safety violations and assault. The highest incidence of emergencies was seen in patients 0 to 9 years old (41.8%). The most common causes of jaw fracture were falls, assaults, and traffic accidents in that order. In the acute toothache group, most patients had pulpitis (41.2%). In the infection group, most had buccal space abscesses (40.0%). In the hemorrhage group, post-operative bleeding cases (80.5%) were the majority, and hemostasis was obtained mostly by pressure dressings. For the TMJ disorder group, masticatory muscle disorder (65.4%) was more common than TMJ dislocation. Conclusion: In this study, trauma was the most frequent reason for patients who visited the emergency room. However, acute toothache, hemorrhage, infection and TMJ disorders were also seen frequently. Dental emergency patients could be better treated by understanding patterns of dental emergencies and performing proper diagnoses.

• Membrane Journal
• /
• v.18 no.1
• /
• pp.26-34
• /
• 2008

In this study, periodic water-back-flushing using permeate water was performed to minimize membrane fouling and to enhance permeate flux in advanced water treatment system by ceramic microfiltration. We investigated effect of water-back-flushing period (FT) and time (BT), and tried to find the optimal operating conditions. BT was fixed at 3 sec and FT was changed in $30{\sim}120$ sec to inspect effect of FT. Also, FT was fixed at 120 sec and BT was changed as $3{\sim}12$ sec at experiment of BT effect. At both two experiments, TMP was fixed at 1.52 bar, water-back-flushing pressure at 0.98 bar, feed flow rate at 0.5 L/min, and feed water temperature at $20^{\circ}C$. As the result, optimal FT was 30 sec at fixed BT 3 sec in our experimental range. It means that the more frequent back-flushing was the more effective to reduce membrane fouling. However, there were not large effects of FT due to a short BT. Then, increasing BT at fixed FT 120 sec could decrease resistance of membrane fouling ($R_f$) and increase permeate flux (J) and dimensionless permeate flux ($J/J_o$), and the most total permeate volume ($V_T$) could be produced at the maximum BT 12 sec.

• Membrane Journal
• /
• v.24 no.1
• /
• pp.31-38
• /
• 2014

Rainwater harvesting is a process by which rainwater collected from rooftop or other catchment is purified so that the water can be directly or indirectly used by human beings for beneficial uses. As rainwater is increasingly considered for high quality purposes, membranes have gained an important place in rainwater treatment. It has advantages such as the production of high quality water, small footprint, and affordable energy consumption. Nevertheless, membrane fouling is regarded as a serious problem similar to the cases of water treatment and wastewater reclamation. In this study, we applied microfiltration (MF) membranes for rainwater treatment. In addition, a low pressure ultraviolet (UV) process was also use as a pretreatment to control notonly. To quantify the effect of UV on organic matters, both total organic carbon (TOC) and UV absorbance (UVA) were measured. Moreover, the effect of UV pretreatment on membrane fouling was investigated. Experimental results indicated that the pretreatment of membranes using LPUV was effective to control fouling of MF membranes only when the rainwater was contaminated by algae. This was attributed the reduction and modification of organics after UV treatments. It is likely that the UV/MF process is a promising option for water treatment in decentralized water treatment such as micro water grid systems.

• Membrane Journal
• /
• v.28 no.4
• /
• pp.252-259
• /
• 2018

An acidic, real metal-plating wastewater was treated by a fluidized bed membrane reactor introduced with granular activated carbon (GAC) as fluidized media. With GAC fluidization, there was no increase in suction pressure with time at each flux set-point applied. At neutral solution pH, much less fouling rate was observed than acidic pH under GAC fluidization. Higher solution pH resulted in the increase in particle size in metal-finishing wastewater, thus producing a less dense cake structure on membrane. More than 95% of chemical oxygen demand was observed from the fluidized bed membrane reactor under GAC fluidization. Total suspended solid concentration in membrane permeate was near zero. At the raw wastewater pH, no removal of copper and chromium by the fluidized bed membrane reactor was observed. As the pH was increased to 7.0, removal efficiency of copper and chromium was increased considerably to 99 and 94%, respectively. Regardless of solution pH tested, more than 95% of cyanide was removed possibly due to the strong adsorption of organic-cyanide complex on GAC in fluidized bed membrane reactor.

• Composites Research
• /
• v.26 no.6
• /
• pp.363-372
• /
• 2013

Numerical simulation for Resin Transfer Molding manufacturing process is attempted by using the eXtended Finite Element Method (XFEM) combined with the level set method. XFEM allows to obtaining a good numerical precision of the pressure near the resin flow front, where its gradient is discontinuous. The enriched shape functions of XFEM are derived by using the level set values so as to correctly describe the interpolation with the resin flow front. In addition, the level set method is used to transport the resin flow front at each time step during the mold filling. The level set values are calculated by an implicit characteristic Galerkin FEM. The multi-frontal solver of IPSAP is adopted to solve the system. This work is validated by comparing the obtained results with analytic solutions. Moreover, a localization method of XFEM and level set method is proposed to increase the computing efficiency. The computation domain is reduced to the small region near the resin flow front. Therefore, the total computing time is strongly reduced by it. The efficiency test is made with a simple channel flow model. Several application examples are analyzed to demonstrate ability of this method.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.7 no.3
• /
• pp.265-276
• /
• 1995

In this Paper, the Performance of the convolution method has been investigated as an effort to develop a simple system of predicting wind-driven surface current on a real time basis. In this approach wind stress is assumed to be spatially uniform and the effect of atmospheric pressure is neglected. The discrete convolution weights are determined in advance at each point using a linear three-dimensional Galerkin model with linear shape functions(Galerkin-FEM model). Four directions of wind stress(e.g. NE, SW, NW, SE) with unit magnitude are imposed in the model calculation for the construction of data base for convolution weights. Given the time history of wind stress, it is then possible to predict with-driven currents promptly using the convolution product of finite length. An unsteady wind stress of arbitrary form can be approximated by a series of wind pulses with magnitude of 6 hour averaged value. A total of 12 pulses are involved in the convolution product To examine the accuracy of the convolution method a series of numerical experiments has been carried out in the idealized basin representing the scale of the Yellow Sea and the East China Sea. The wind stress imposed varies sinusoidally in time. It was found that the predicted surface currents and elevation fields were in good agreement with the results computed by the direct integration of the Galerkin model. A model with grid 1/8$^{\circ}$ in latitude, l/6$^{\circ}$ in longitude was established which covers the entire region of the Yellow Sea and the East China Sea. The numerical prediction in terms of the convolution product has been carried out with particular attention on the formation of upwind flow in the middle of the Yellow Sea by northerly wind.

• Korean Journal of Community Nutrition
• /
• v.19 no.6
• /
• pp.513-526
• /
• 2014

Objectives: This study was conducted to investigate the effect of low sodium diet education program on dietary habits, diet quality, and measures of obesity in overweight or obese middle-aged women. Methods: Subjects were 81 individuals aged 45 years or over, who completed an 8-week nutrition education. The subjects were divided into a normal group (N = 30) and an overweight-obese group (N = 51) according to the BMI. The effects were evaluated by anthropometric measurement, biochemical analysis, questionnaire, and diet records before and after the program. Results: Overweight-obese group showed significant decreases in weight (p < 0.0001), BMI (p < 0.0001), percent of body fat (p = 0.0087), waist circumference (p < 0.0001), systolic (p = 0.0003) and diastolic blood pressure (p = 0.0261). Nutrients intakes were not different between the two groups and only sodium intake was decreased after education. Total score of general dietary habits, dietary behavior related to sodium intake, dietary diversity score (DDS), diet variety score (DVS), and diet quality index-international (DQI-I) were improved in both groups compared to the baseline. Overweight-obese group showed significant improvement in 'having fruits everyday', 'having fish everyday', 'trying to eat many kinds of food', 'eating less broth when eating soup, stew, and noodles', 'eating less kimchi and salt-fermented vegetable', and 'propensity to think that dishes should be pretty seasoned'. In addition, moderation of empty calories food (p = 0.0064) and macronutrient ratio (p = 0.0004) were improved in the overweigh-obese group, but in the normal group, the results did not reach statistical significance. Conclusions: These results suggested that low sodium diet education program may contribute to obesity management by improving diet quality and dietary habits in middle-aged women.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.5
• /
• pp.295-305
• /
• 2010

Although the rubble mound breakwaters in Korea have been damaged by typhoons almost every year, quantification of erosion of armor block have seldomly been made. In this paper, the damage of armor units is standardized by the relative damage. In the case where the number of damaged units is reported, it is divided by the total number of units to calculate the relative damage. In the case where the rehabilitation cost is reported, the relative damage is calculated by using its relationship with the present value of the past rehabilitation cost. The relative damage is shown to have strong correlations with the typhoon parameters such as nearest central air pressure and maximum wind speed at each site. On the other hand, the existing numerical methods for calculating the cumulative damage are compared with hydraulic model tests. The method of Melby and Kobayashi (1998) is shown to give a reasonable result, and it is used to calculate the relative damage, which is compared with the measured damage. A good agreement is shown for the East Breakwater of Yeosu Harbor, while poor agreement is shown for other breakwaters. The poor agreement may be because waves of larger height than the design height occurred due to strong typhoons associated with climate change so that the relative damage increased during the last several decades.

• Journal of Distribution Science
• /
• v.14 no.6
• /
• pp.75-80
• /
• 2016

Purpose - A growing demand for sustainability reporting has placed pressure on firms with non-financial information that affects firm valuation, growth, and development. In particular, a number of researchers have investigated various topics in Corporate Social Responsibility (CSR), non-financial information. Prior studies suggest that CSR may affect corporate outcomes like corporate reporting, financial performance, and disclosures. However, the results from prior studies are not clear whether CSR affects corporate outcomes. This is partially due to the measurement issues with CSR. In this study, we examine whether CSR affects the quality of corporate reporting, one of the popular measures in corporate outcomes. We find an evidence that CSR positively affects the quality of corporate reporting. Research design, data, and methodology - In this study, we collected a unique dataset of CSR from MSCI. Total 169 firms listed in the Korean Stock Exchange from 2011 to 2014 were collected and analysed with the detailed CSR reports. Using a correlation test, we found a weak association between CSR and the quality of corporate reporting. However, the regression tests provided a strong relationship between CSR and the quality of corporate reporting after controlling for other variables that may affect the quality of corporate reporting. Additionally, we calculated the t-statistics based on heteroskedaticity-consistent standard errors (White, 1980). Results - Before we run the regression test, we sort the measures of the two dependent variables into each rating of CSR (from AAA to CCC). The results indicate that the quality of corporate reporting measured by discretionary accruals and performance-matched discretionary accruals monotonically decrease as the CSR ratings increase. This supports our hypothesis. In the regression tests, the coefficient on MJDA (PMDA) is -0.183 (-0.173) and significant at the 5% level. We can interpret the results as CSR affecting the quality of corporate reporting in positive ways. Other coefficients on control variables are consistent with prior studies. For example, the coefficients on both LOSS and LEV are positive and significant at conventional level, meaning that firms with financial difficulty may harm their quality of corporate reporting. Conclusion - We found an evidence that CSR is positively associated with the quality of corporate reporting. This study contributes to the literature in various ways. First, this study extends the line of CSR research by providing additional evidence in the setting of ethical behaviors by managements. This is consistent with the hypothesis and supports the results of prior studies. Second, to the best of my knowledge, this is the first study using the MSCI CSR ratings. In contrast with prior studies using different measures of CSR, the MSCI CSR ratings allow us to provide in-depth analysis. Third, the additional measure of dependent variable (PMDA) allows us to improve the robustness of our results. Overall, the results provided this study to extend the findings in prior studies by providing incremental evidence.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.3
• /
• pp.102-118
• /
• 2010

Since hills are transitional area between plains and mountains, they are always under pressure to be developed. In the past, hills were recognized as areas that can be developed easily, but in the present they should be considered and preserved as forest resources. So far, little research has been done regarding cultivation status and transitional procedure. This study attempts to quantify changes in land use using time series data. To do so, this study has created a land use map for 1915, 1972, 2002 and 2006, and conducted a spatial analysis based on GIS. The research areas(the total size of the hills are 3,034 ha) are located in Chungcheongnam-do of South Korea. The size of the forest area of the hills in the research zone has decreased by 50% during the period of 1915 to 2006. The size of the reduced forest area after 2002 is similar to size of the reduced area that had taken place for the last 30 years before 2002. The reduction in forest area in the research area has led to increases in paddy field, upland field, artificial structures, and bare land. From 1915 to the late 1980s, hill development had been related to the primary industry and after the late 1980s, it has associated with the development of the secondary industry including industrial complex.