• Korean Journal of Metals and Materials
• /
• v.49 no.8
• /
• pp.614-618
• /
• 2011

Nanopowders of MgO, $Al_2O_3$ and $SiO_2$ were made by high energy ball milling. The rapid sintering of nanostructured $MgAl_2O_4-Mg_2SiO_4$ composites was investigated by a high-frequency induction heating sintering process. The advantage of this process is that it allows very quick densification to near theoretical density and inhibition of grain growth. Nanocrystalline materials have received much attention as advanced engineering materials with improved physical and mechanical properties. As nanomaterials possess high strength, high hardness, excellent ductility and toughness, undoubtedly, more attention has been paid for the application of nanomaterials. Highly dense nanostructured $MgAl_2O_4-Mg_2SiO_4$ composites were produced with simultaneous application of 80MPa pressure and induced output current of total power capacity (15 kW) within 2min. The sintering behavior, gain size and mechanical properties of $MgAl_2O_4-Mg_2SiO_4$ composites were investigated.

• Safety and Health at Work
• /
• v.12 no.2
• /
• pp.147-153
• /
• 2021

Background: In this study, the association of work and demographic characteristics with different traffic offenses committed by food delivery riders in Greece was examined. Previous research has identified various factors related to risky driving however, there is a need for exploring the complex interrelationship of work-related factors underlying risky driving behavior. Materials and Methods: A 2-items uestionnaire was used exploring delivery riders demographic characteristics, terms of employment, issues of concern during work and type of traffic offenses committed. In total, uestionnaires were analyzed using logistic regression in order to identify characteristics independently associated with serious traffic offenses, namely, red-light running and helmet non-use. Results: The analysis showed that: (i) typical health and safety measures had no effect on serious traffic offenses, (ii) young age was related to both offenses however (iii) different sets of work conditions were associated with reports of red-light running (i.e. low work experience, use of personal vehicle for work, and payment by hour) and helmet non-use respectively (i.e. intense work pace, high tip income per day and low concern about vehicle condition). Conclusion: The above findings provide evidence that serious traffic offenses are manifestations of underlying conflict experienced by the riders between safety and various performance criteria. Each one of the two offenses is related to different rider profiles aiming to satisfy different goals, namely, those mainly trying to maximize profit non-helmet users and those, mostly inexperienced ones, trying to cope with work pressure red light runners. Potential regulatory measures to alleviate risky practices are discussed.

• Fashion & Textile Research Journal
• /
• v.22 no.6
• /
• pp.862-872
• /
• 2020

This study explores the effects of facemasks on respiratory, thermoregulatory, cardiovascular responses during exercise on a treadmill and at rest. Five male subjects (25.8 ± 0.8 y, 171.8 ± 9.2 cm in height, 79.8 ± 28.1 kg in weight) participated in the following five experimental conditions: no mask, KF80, KF94, KF99, and N95. Inhalation resistance was ranked as KF80 < KF94 < N95 < KF99 and dead space inside a mask was ranked as KF80 = KF94 < N95 < KF99. The surface area covered by a mask was on average 1.1% of the total body surface area. The results showed no significant differences in body core temperature, oxygen consumption (VO2), carbon dioxide production (VCO2), heart rate or subjective perception among the five experimental conditions; however, cheek temperature, respiratory ventilation and blood pressure were greater for KF80 or KF94 conditions when compared to KF99 or N95 conditions (p<0.05). The differences among mask conditions are attributed to the dead space or specific designs (cup type vs pleats type) rather than the filtration level. In addition, the results suggest that improving mask design can help mitigate respiratory resistance from increased filtration.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.2
• /
• pp.1-11
• /
• 2021

The cavity inside the combustor increases the mixing efficiency of fuel and air by inducing a oscillation of the flow and the recirculation area with a low speed, and enables continuous combustion by maintaining the flame. In this study, the characteristics of the internal flow by change in the shape parameters of the cavity were analyzed through experiments and two-dimensional computational analysis. It was observed that the flow in the supersonic combustor was greatly influenced by various shape parameters of cavity besides L/D. Even with the same L/D, it was confirmed that the flow type varies depending on the depth of the cavity, either open or closed type, and the aft ramp angle of the cavity and the height of the combustor also affect the flow characteristics. As a result, the change in the shape parameters of the cavity had a great influence on the total pressure loss.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.5
• /
• pp.65-72
• /
• 2021

700 W class laboratory model Hall thruster, which can be used for the orbit control or station keeping of small satellites, was developed. The size of the discharge channel was determined using a scaling law, and the magnetic field was designed to be symmetric with respect to the midline of the discharge channel and to be maximized outside the discharge channel. Base pressure of a vacuum chamber was maintained below 2.0×10^-5 Torr during experiments, and the thrust was measured by a thrust stand. The anode flow rate and coil current were varied with the fixed anode voltage at 300 V. Under the operation condition at 2.36 mg/s anode flow rate and 2.4 A coil current, performance was optimized as 38 mN thrust, 1,540 s total specific impulse, and 50 % anode efficiency at 620 W anode power.

• Membrane Journal
• /
• v.32 no.2
• /
• pp.126-132
• /
• 2022

Water purifiers have a quite different characteristic in comparison with general membrane water treatment processes in which the running and resting are repeated dozens of times a day. In the case of water purifiers using reverse osmosis membranes, this characteristic makes a phenomenon that the total dissolved solids (TDS) of permeate in water purifiers at the beginning of running shows a higher value than a normal value (TDS reduction is lower than a normal value). It is called "TDS creep". The effects of resting times and feed concentrations on the TDS creep were investigated. The feed flushing, the volume increase in permeate side and the flushing with purified water were applied to reduce TDS creep and the effectiveness were observed. Among these trials, the minimization of concentration between feed and permeate side of reverse osmosis membrane like the flushing with purified water can be an ultimate solution to reduce the TDS creep.

• Journal of Ocean Engineering and Technology
• /
• v.36 no.2
• /
• pp.83-90
• /
• 2022

This paper presents the minimum submergence depth of an underwater vehicle that can remove the effect of free surface on the resistance of the underwater vehicle. The total resistance of the underwater vehicle in fully submerged modes comprises only viscous pressure and friction resistances, and no wave resistance should be present, based on the free surface effect. In a model test performed in this study, the resistance is measured in the range of 2 to 10 kn (1.03-5.14 m/s) under depth conditions of 850 mm (2.6D) and 1250 mm (3.8D), respectively, and the residual resistance coefficients are compared. Subsequently, resistance analysis is performed via computational fluid dynamics (CFD) simulation to investigate the free surface effect based on various submergence depths. First, the numerical analysis results in the absence of free surface conditions and the model test results are compared to show the tendency of the resistance coefficients and the reliability of the CFD simulation results. Subsequently, numerical analysis results of submergence depth presented in a reference paper are compared with the model test results. These two sets of results confirm that the resistance increased due to the free surface effect as the high speed and depth approach the free surface. Therefore, to identify a fully submerged depth that is not affected by the free surface effect, case studies for various depths are conducted via numerical analysis, and a correlation for the fully submerged depth based on the Froude number of an underwater vehicle is derived.

• Journal of Korean Medicine for Obesity Research
• /
• v.22 no.1
• /
• pp.21-29
• /
• 2022

Objectives: This study aimed to examine the changes in ingredients according to its cultivation method by examining the content of saponin and non-saponin components of ginseng. Methods: Ginseng saponin component analysis was compared and reviewed using the high-performance liquid chromatography method, and acidic polysaccharide component was measured using the carbazole sulfuric acid method. Results: The comparative analysis of ginseng saponin content of 4 and 6 years old fresh ginseng showed the following results. According to the cultivation method, upland field cultivation fresh ginseng showed higher average content of crude saponin than paddy field cultivation fresh ginseng. Whereas, paddy field cultivation fresh ginseng showed higher average content of total saponin than upland field cultivation fresh ginseng. Ginsenoside Rb1 showed higher content of paddy field cultivation fresh ginseng than upland field cultivation fresh ginseng in 6 years old ginseng. However, it showed higher content of upland field cultivation fresh ginseng than paddy field cultivation fresh ginseng in 4 years old ginseng. Additionally, ginsenoside Rg1 showed higher content of paddy field cultivation fresh ginseng than upland field cultivation fresh ginseng in 6 years old ginseng, whereas upland field cultivation fresh ginseng showed higher content of paddy field cultivation fresh ginseng in 4 years old ginseng. The effect on the content of ginseng saponins and acidic polysaccharides according to paddy field and upland field cultivation methods is considered to be small. Conclusions: The paddy field cultivation method, which is more efficient in production cost due to depletion of farmland and long-distance cultivation, is considered to be an economical cultivation method.

• Journal of Trauma and Injury
• /
• v.35 no.3
• /
• pp.189-194
• /
• 2022

Purpose: The purpose of this study was to determine whether a higher Injury Severity Score (ISS) could serve as an indicator of splenectomy in patients with traumatic splenic lacerations. Methods: A total of 256 cases of splenic laceration were collected from January 1, 2005 to December 31, 2018. After the application of exclusion criteria, 105 were eligible for this study. Charts were reviewed for demographic characteristics, initial vital signs upon presentation to the emergency room, Glasgow Coma Scale, computed tomography findings, ISS, and treatment strategies. The cases were then divided into nonsplenectomy and splenectomy groups for analysis. Results: When analyzed with the chi-square test and t-test, splenectomy was associated with a systolic blood pressure lower than 90 mmHg, a Glasgow Coma Scale score lower than 13, active bleeding found on computed tomography, a splenic laceration grade greater than or equal to 4, and an ISS greater than 15 at presentation. However, in multivariate logistic regression analysis, only active bleeding on computed tomography showed a statistically significant relationship (P=0.014). Conclusions: Although ISS failed to show a statistically significant independent relationship with splenectomy, it may still play a supplementary role in traumatic splenic injury management.

• Journal of The Korean Society of Integrative Medicine
• /
• v.10 no.2
• /
• pp.49-59
• /
• 2022

Purpose : The purpose of this study is to directly understand the health condition of residents of mental health sanatoriums nationwide, which has been difficult to ascertain in surveys conducted to date. The study presents specific measures for improving the health of these residents. Methods : A "physical examination questionnaire for residents of mental health sanatoriums" was developed to check the basic physical condition of residents, and 20 out of 59 mental health sanatoriums nationwide were randomly selected. Medical personnel visited the sanatoriums, interviewing and examining the residents in person. A total of 396 health surveys were completed. Results : Many of the residents were underweight but had abdominal obesity. It was confirmed that chronic diseases among the residents were not diagnosed early or were not properly managed. Among the subjective symptoms complained of by the residents, musculoskeletal symptoms were the most common. Oral examinations revealed a serious level of oral health problems among the residents, including dental caries and missing teeth. Basic physical examinations found health problems that required additional examination or medical treatment. Blood pressure abnormalities made up the highest percentage of the health problems. Conclusion : Regular health surveys are needed to determine the health condition of residents of mental health sanatoriums. Access to and quality of primary medical services within the sanatoriums need to be dramatically improved. A delivery system for severe diseases and emergency medical care in the sanatoriums should also be specifically presented. The residents should be notified upon admission and during their stay that they have the right to the enjoyment of the highest attainable standard of mental and physical health. The issue of health rights should be addressed within a larger framework of reorganizing management plans for people in the community - not only residents - with chronic mental illness.