• 한국기계가공학회지
• /
• 제19권6호
• /
• pp.96-101
• /
• 2020

In this paper, we present the results of our research to perform 3D laser scanning functions by adding a focusing lens to a conventional 2D laser scanner. For the optical design, the ray-tracing technique was used along with a total of four lenses as the variable incident focusing lens, the collimating lens, and the F-Theta lens. As design variables, the curvature of the incident focusing lens (Lens #1) was assumed to be us, l mm and sumed mm, and the incident angles were set at 0cidenus, l. In addition, the distance between the focusing lens and the collimating lens was set to vary from 5 mm to 15 mm. When the incident focal length was varied from 5 mm to 15 mm, the exit focal length was calculated to vary from 67.5 mm to 56.8 mm for the lens with R = 100 mm and from 108.5 mm to 99.0 mm for the lens with R = 150 mm. When the incident angle was 0°, the focal aberration was only slightly observable at 10㎛ in both the x- and y-direction. At 7.5° was the focal aberration of approximately 20~50㎛ was measured at 20㎛. To investigate the chromatic aberration of the designed optical device, the distortion of the focus was observed when the 550 nm beam was simulated on lens designed for a 980 nm wavelength.

• Journal of Gastric Cancer
• /
• 제15권3호
• /
• pp.214-217
• /
• 2015

Surgeons occasionally encounter a patient with a gastric cancer invading an adjacent organ, such as the pancreas, liver, or transverse colon. Although there is no established guideline for treatment of invasive gastric cancer, combined resection with radical gastrectomy is conventionally performed for curative purposes. We recently treated a patient with a large gastric cancer invading the abdominal wall, which was initially diagnosed as a simple abdominal wall abscess. Computed tomography showed that an abscess had formed adjacent to the greater curvature of the stomach. During surgery, we made an incision on the abdominal wall to drain the abscess, and performed curative total gastrectomy with partial excision of the involved abdominal wall. The patient received intensive treatment and wound management postoperatively with no surgery-related adverse events. However, the patient could not receive adjuvant chemotherapy and expired on the 82nd postoperative day.

• 물과 미래
• /
• 제15권1호
• /
• pp.33-42
• /
• 1982

하천부지의 이용, 개간사업 및 하천을 공학적 측면에서 지속관리해야 된다는 이론이 활발해 짐에 따라 하천형태학의 연구가 주목을 받게 되었다. 그 가운데서도 하천의 사행에 관한 문제는 가장 중요함을 인정받았다. 그러므로 사행특성의 분석에서 많은 이상적인 모델을 사용하였는데 이와 같은 이상적이 모델에 의해 얻어진 자료나 기하학적 변수의 결정방법은 개인의 선호에 의해 달라지는 수가 많다. 본 연구에서는 수로형태의 모델화에 의한 부합리를 제거하기 위하여 통계적인 방법을 사용하였으며 새로운 사행특성 분석방법인 선형 일반화 알고리즘에 의한 수로모델을 사행특성 분석에 사용하였다. 그 결과 곡율의 분산정도가 사행밀도를 판별해주는 지수가 됨을 알았고, 첨연도는 임의수로 내에서 직선수로의 특성을 표시하는 척도가 됨을 알 수 있었다. 특히 선형 일반화 알고리즘에 의한 수로모델은 사행특성을 분석하는데 좋은 모델이 됨을 나타내 주었다.

• 대한간호
• /
• 제12권5호통권67호
• /
• pp.83-92
• /
• 1973

1972년 1월부터 1972년 12월말까지 충남대학교 의과대학 부속병원에서 위 수술을 받은 환자 66명을 대상으로 여러 가지 통계 결과 1. 성별 분포에선 남자가 51명 여자가 15명으로 약 3.4:1의 비율을 나타냈다. 2. 연령별 분포에선 $69.7\%$가 40세 이상에서 나타났다. 3. Chief complain은 Indigestion이었다. 4. 증상의 평균 연한은 1년 전후의 Chronic symptom을 경험했다. 5. Vital sign의 변화는 대부분이 별로 나타나지 않았다. 6. 수술 전 수혈은 1000cc 이내로 환자의 $78\%$에 필요했었다. 7. 수술 전의 Hb은 정상보다 낮은 율은 $45.4\%$였고 정상은 $54.6\%$였다. 8. 수술 전의 W.B.C는 정상보다 낮은 율은 $10.6\%$, 정상이 $42.4\%$, 정상보다 높은 율이 $47\%$였다. 9. 수술 전의 Ht치는 정상보다 낮은 율은 $60.6\%$, 정상은 $36.4\%$ 정상보다 높은 율은 $3\%$였다. 10. 수술 전 위액검사 결과는 Cancer인 경우는 Free acid와 Total acid가 모두 거의 정상보다 낮았고 Ulcer인 경우 대부분 높았다. 11. Liver function test에서는 표에서 나타난 대로 많은 변화는 없었다. 12. 병소 부위는 Cancer의 경우 $51.8\%$에서 Pylorus부위에 왔었고 Ulcer의 경우 $62.4\%$에서 Lesser curvature (ciratricial region포함)에 왔었다. 13. 수술방법은 $77.7\%$가 Subtotal gastrectomy였었다. 14. 위 수술을 위한 입원 일자는 $60\%$ 이상에서 $11\~15$일간의 평균을 보였었다.

• Structural Engineering and Mechanics
• /
• 제12권1호
• /
• pp.1-16
• /
• 2001

A reliable and accurate method has been developed to predict the flexural deformation response of structural concrete members subject to service load. The method that has been developed relates the extent of concrete cracking, measured as a function of the magnitude of applied moment in a member, to the reduction in the effective moment of inertia of cracked reinforced concrete members under service load conditions. The ratio of the area of the moment diagram where the moment exceeds the cracking moment, to the total area of the moment diagram for any loading, provides the basis for the calculation of the effective moment of inertia. This ratio also represents mathematically a probability of crack occurrence. Verification of this method for the determination of the effective moment of inertia has been achieved from an experimental test program, and has included beam tests with different loading configurations, and shear wall tests subjected to a range of vertical and lateral load levels. Further verification of this method has been made with reference to the experimental investigation of other recently published work.

• Structural Engineering and Mechanics
• /
• 제67권6호
• /
• pp.565-578
• /
• 2018

This research article reported the nonlinear finite solutions of the nonlinear flexural strength and stress behaviour of nano sandwich graded structural shell panel under the combined thermomechanical loading. The nanotube sandwich structural model is derived mathematically using the higher-order displacement polynomial including the full geometrical nonlinear strain-displacement equations via Green-Lagrange relations. The face sheets of the sandwich panel are assumed to be carbon nanotube-reinforced polymer composite with temperature dependent material properties. Additionally, the numerical model included different types of nanotube distribution patterns for the sandwich face sheets for the sake of variable strength. The required equilibrium equation of the graded carbon nanotube sandwich structural panel is derived by minimizing the total potential energy expression. The energy expression is further solved to obtain the deflection values (linear and nonlinear) via the direct iterative method in conjunction with finite element steps. A computer code is prepared (MATLAB environment) based on the current higher-order nonlinear model for the numerical analysis purpose. The stability of the numerical solution and the validity are verified by comparing the published deflection and stress values. Finally, the nonlinear model is utilized to explore the deflection and the stresses of the nanotube-reinforced (volume fraction and distribution patterns of carbon nanotube) sandwich structure (different core to face thickness ratios) for the variable type of structural parameter (thickness ratio, aspect ratio, geometrical configurations, constraints at the edges and curvature ratio) and unlike temperature loading.

• 한국통신학회논문지
• /
• 제37A권11호
• /
• pp.961-971
• /
• 2012

This article is concerned with effective numerical techniques for partial differential equation (PDE)-based image restoration. Numerical realizations of most PDE-based denoising models show a common drawback: loss of fine structures. In order to overcome the drawback, the article introduces a new time-stepping procedure, called the method of nonflat time evolution (MONTE), in which the timestep size is determined based on local image characteristics such as the curvature or the diffusion magnitude. The MONTE provides PDE-based restoration models with an effective mechanism for the equalization of the net diffusion over a wide range of image frequency components. It can be easily applied to diverse evolutionary PDE-based restoration models and their spatial and temporal discretizations. It has been numerically verified that the MONTE results in a significant reduction in numerical dissipation and preserves fine structures such as edges and textures satisfactorily, while it removes the noise with an improved efficiency. Various numerical results are shown to confirm the claim.

• 대한치과교정학회지
• /
• 제17권1호
• /
• pp.73-83
• /
• 1987

The purpose of this longitudinal study was to examine the growth changes of mandibular symphysis and lower incisors with age. The material was 294 lateral cephalometric radiographs taken longitudinally from 6 to 13 year old children, who were not teated orthodontically. The following conclusions seem to be warranted. 1. The sex difference of the measurements of mandibular symphysis and lower incisors were not statistic ally significant. 2. There were growth increments (2.69mm in boys and 2.08mm in girls) in the total thickness of mandibular symphysis. 3. There were a great change and individual variations on the curvature of anterior border of mandibular symphysis. 4. The chin angle had a tendency to decrease progressively in both sexes. 5. There were growth increments (8.23mm in boys and 7.40mm in girls) in the anterior dental height. 6. The lower anterior teeth tended to incline labially with age.

• 치과방사선
• /
• 제20권2호
• /
• pp.227-234
• /
• 1990

The purpose of this study was to evaluate the incidence and several radiographic features of dilacerated teeth in 2132 full month radiograms in Korean. The results were as follows: 1. The occurrence was revealed to 2.7% in total examined teeth, and these anomalies were occurred in maxilla (52.4%) more than in mandible (47.6%). 2. There was a predilection for occurrence of dilaceration in female, which included 12.8% of the female compared to 11.3% in male. 3. The frequency of dilaceration in male, which included 40.5% in maxilla and 59.5% in mandible. The frequency of dilaceration in female, which included 52.4% in maxilla and 47.6% in mandible. 4. The order of frequency of dilaceration was second premolar, first premolar, lateral incisor, canine in maxilla, and first premolar, second premolar, canine, lateral incisor, central incisor in mandible. 5. In classifying of dilacerated teeth into 3 types by following appearances such as root curvature. Distal dilaceration was by far most common containing 65.8% of the cases. The least frequent was mesial dilaceration, which included 6.5% of the cases.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2001년도 유체기계 연구개발 발표회 논문집
• /
• pp.37-42
• /
• 2001

A computerized axial flow fan design system is developed with the capabilities for predicting the aerodynamic performance and the noise characteristics of fan. In the present study, the basic fan blading design is made by combining vortex distribution scheme with camber line design, airfoil selection, blade thickness distribution and stacking of blade elements. With the designed fan blade geometry, the through-flow field and the performance of fan are analyzed by using the streamline curvature computing scheme with spanwise total pressure loss and flow deviation models. Fan noise is assumed to be generated due to the pressure fluctuation induced by wake vortices of fan blades and to radiate as dipole distribution. The vortex-induced fluctuating pressure on blade surface is calculated by combining thin airfoil theory and the predicted flow field data. The predicted performances, sound pressure level and noise directivity patterns of fan by the present method are favorably compared with the test data of actual fans. Furthermore, the present method is shown to be very useful in designing the blade geometry of new fan and optimizing design variables of the fan to achieve higher efficiency and lower noise level.