• Title/Summary/Keyword: total correction

Search Result 744, Processing Time 0.035 seconds

Change of Craniovertebral Angle(CVA) and Respiration on Application Correction Method of Posture and Breathing Accessory Muscle Exercise in Forward Head Posture(FHP) (두부전방전위자세에 자세교정법과 호흡보조근운동의 적용 시 CVA와 호흡의 변화)

  • Cho, hyunrae
    • Journal of The Korean Society of Integrative Medicine
    • /
    • v.3 no.3
    • /
    • pp.89-94
    • /
    • 2015
  • Purpose : This study was analyzed to researched the improvement of the posture and breathing ability on correction method of posture and breathing exercise in Forward Head Posture(FHP) Method : Eighten forward head posture subjects participated in this study. The control group applied to correction method of posture and the experiment group applied to correction method of posture with breathing exercises. Results : The results showed significant improvement in Craniovertebra-Angle on each two group(P<0.05). All the other result showed non-significant in respiratory(Tidal volume, Expiratory residual volume, Inspiratory residual volume) But value of result is slightly improved in after exercise. Conclusion : CVA angle is increased in each group but not increased between experiment group and control group. Total Volume(TV), Inspiratory Reserve Volume(IRV) and Expiratory Reserve Volume(ERV) are a little increased.

Three-Dimensional Flow Analysis and Improvement of Slip Factor Model for Forward-Curved Blades Centrifugal Fan

  • Guo, En-Min;Kim, Kwang-Yong
    • Journal of Mechanical Science and Technology
    • /
    • v.18 no.2
    • /
    • pp.302-312
    • /
    • 2004
  • This work developed improved slip factor model and correction method to predict flow through impeller in forward-curved centrifugal fan. Both steady and unsteady three-dimensional CFD analyses were performed to validate the slip factor model and the correction method. The results show that the improved slip factor model presented in this paper could provide more accurate predictions for forward-curved centrifugal impeller than the other slip factor models since the present model takes into account the effect of blade curvature. The correction method is provided to predict mass-averaged absolute circumferential velocity at the exit of impeller by taking account of blockage effects induced by the large-scale backflow near the front plate and flow separation within blade passage. The comparison with CFD results also shows that the improved slip factor model coupled with the present correction method provides accurate predictions for mass-averaged absolute circumferential velocity at the exit of impeller near and above the flow rate of peak total pressure coefficient.

Position Correction Algorithm of Door Mounting Robot based on Door-Chassis Gap Sleasure (도어-차체 틈새 측정에 근거한 도어 장착 로보트의 위치 보정 알고리즘 개발)

  • 김미경;강희준
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 1994.10a
    • /
    • pp.565-570
    • /
    • 1994
  • This work deals with finding a suitable position correction algorithm of industrial robot based on measuring gaps between door and chassis. The algorithm calculates correction quantities and then must allow visually acceptable door-chassis assembly take. The algorithm simulation is performed for a simple door-chassis model, and its effectiveness is addressed in terms of the predefined total unformity, line uniformity. In addition, the error sensitivity analysis of the rotation center of door due to the mismatch of robot grasping is performed using the algorithm.

  • PDF

Staged Total Correction of Complexes Anomalous Origin of Right Pulmonary Artery from the Ascending Aorta One Case Report (상행 대동맥에서의 우폐동맥 이상기시증을 동반한 복잡 심기형의 단계적 완전 교정술-1례 보고-)

  • 정일상;한재진
    • Journal of Chest Surgery
    • /
    • v.30 no.3
    • /
    • pp.322-325
    • /
    • 1997
  • We experienced a case of anomalous origin of right pulmonary artery from the ascending aorta associated with pulmonary atresia, ventricular septal defect, absence of left pulmonary artery afld multiple major aortopulmonary collateral artery (MAPCA). At ten month of age, left pulmonary artery creation with unifocalization and right pulmonary artery banding were performed as the Urst stage, followed by coil embolization of right MAPCA 1 month later, and 1 year later, the total correction was done. After total repair, the patient showed good postoperative course and excellent angiographic and hemodynamic results at 1 year follow-up study.

  • PDF

Surgical correction of Total anomalous pulmonary venous drainage of cardiac type. - 3 cases - (Cardiac type 총폐정맥 이상환류증 수술치험 3)

  • 김삼현
    • Journal of Chest Surgery
    • /
    • v.20 no.2
    • /
    • pp.323-327
    • /
    • 1987
  • Majority of patients with total anomalous pulmonary venous drainage [TAPVD] have severe symptoms within the first few months of life. And early in the experience with correction of TAPVD, hospital mortality was high, especially in infant. In Sejong General Hospital, we operated on 3 infants with TAPVD of cardiac type. Repair was performed under the conventional cardiopulmonary by pass in one case and by the total circulatory arrest in other 2 cases. Interatial septum between enlarged coronary sinus opening and interatrial septal defect was excised and the coronary sinus was radically unroofed to make wide opening between left atrium and common pulmonary venous channel. The defect in atrial septum was closed with redundant pericardial patch. Postoperative courses were uneventful except transient dysrrhythmia of A-V dissociation. They are doing well on follow up check.

  • PDF

Surgical Correction of Obstruction of the Inferior Vena Cava using Profound Hypothermia and Total Circulatory Arrest - A Case Report - (초 저체온법과 전혈류 정지술을 이용한 하공정맥 폐쇄증의 수술 치험: 1례 보고)

  • 유재현
    • Journal of Chest Surgery
    • /
    • v.24 no.7
    • /
    • pp.732-738
    • /
    • 1991
  • Membranous obstruction of the inferior vena cava[IVC] is a rare congenital anomaly that may present clinical features of Budd-Chiari syndrome caused by chronic obstruction of hepatic drain. We have experienced a case of IVC obstruction caused by hour-glass constriction and membrane in its center. Operative correction was accomplished using profound hypothermia [20%] and total circulatory arrest of 26 minutes. This technique permitted resection of membrane with direct vision and removal of thrombus of IVC and hepatic vein. After then constricted IVC was repaired with autologous pericardial patch. Total circulatory arrest was used intermittently for good visual field. Postoperative course was smooth and postoperative angiography showed unobstructed flow through the IVC in spite of slight constriction of cavoatrial junction and nearly complete disappearance of collateral vessels.

  • PDF

A review of the total correction of tetralogy of Fallot (Fallot 4징증의 근치수술에 대한 임상적 고찰)

  • 채성수
    • Journal of Chest Surgery
    • /
    • v.16 no.3
    • /
    • pp.337-341
    • /
    • 1983
  • The experience with operative treatment for total correction of Tetralogy of Fallot at the department of Thoracic and Cardiovascular Surgery, Korea University Hospital from January, 1977, through April, 1983 was reviewed. Of the 29 patients reviewed, male to female occurrence ratio was 22:7 Type of V.S.D. was type II in 26 cases[90%] and total conus defect in 3 cases[10%]. Average size of V.S.D. was 19 mm. Type of Right ventricular outflow tract stenosis was highest frequency with pulmonary valvular and infundibular stenosis combined type in 21 cases[72%], and there were 8 deaths In this group. Type of R.V.O.T. reconstruction contains 2 cases of infundibulectomy only, 1 case of infundibulectomy with valvular commissurotomy, 2 cases of pericardial patch, 23 Cases of pericardial patch with Teflon or Dacron felt reinforced and 1 case of pulmonary valved conduit reconstruction. Operative mortality was higher in outflow patch through pulmonary valve ring. Overall mortality was 31%. Major causes of death and postoperative complications were low output syndrome, complete A-V block acute renal failure, ventricular fibrillation, bleeding brain abscess, and sudden cardiac arrest.

  • PDF

Uncertainty in Regional Climate Change Impact Assessment using Bias-Correction Technique for Future Climate Scenarios (미래 기상 시나리오에 대한 편의 보정 방법에 따른 지역 기후변화 영향 평가의 불확실성)

  • Hwang, Syewoon;Her, Young Gu;Chang, Seungwoo
    • Journal of The Korean Society of Agricultural Engineers
    • /
    • v.55 no.4
    • /
    • pp.95-106
    • /
    • 2013
  • It is now generally known that dynamical climate modeling outputs include systematic biases in reproducing the properties of atmospheric variables such as, preciptation and temerature. There is thus, general consensus among the researchers about the need of bias-correction process prior to using climate model results especially for hydrologic applications. Among the number of bias-correction methods, distribution (e.g., cumulative distribution fuction, CDF) mapping based approach has been evaluated as one of the skillful techniques. This study investigates the uncertainty of using various CDF mapping-based methods for bias-correciton in assessing regional climate change Impacts. Two different dynamicailly-downscaled Global Circulation Model results (CCSM and GFDL under ARES4 A2 scenario) using Regional Spectial Model for retrospective peiod (1969-2000) and future period (2039-2069) were collected over the west central Florida. Total 12 possible methods (i.e., 3 for developing distribution by each of 4 for estimating biases in future projections) were examined and the variations among the results using different methods were evaluated in various ways. The results for daily temperature showed that while mean and standard deviation of Tmax and Tmin has relatively small variation among the bias-correction methods, monthly maximum values showed as significant variation (~2'C) as the mean differences between the retrospective simulations and future projections. The accuracy of raw preciptiation predictions was much worse than temerature and bias-corrected results appreared to be more significantly influenced by the methodologies. Furthermore the uncertainty of bias-correction was found to be relevant to the performance of climate model (i.e., CCSM results which showed relatively worse accuracy showed larger variation among the bias-correction methods). Concludingly bias-correction methodology is an important sourse of uncertainty among other processes that may be required for cliamte change impact assessment. This study underscores the need to carefully select a bias-correction method and that the approach for any given analysis should depend on the research question being asked.

Studies on the Development of Novel 305 day Adjustment Factors for Production Traits in Dairy Cattle

  • Cho, K.H.;Na, S.H.;Cho, J.H.;Lee, J.H.;Lee, K.J.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.17 no.12
    • /
    • pp.1689-1694
    • /
    • 2004
  • This study was conducted to develop a novel adjustment factors for 305 days using 138,103 lactation records and 1,770,764 daily records, which were based on environmental circumstances such as herd year, season, age at calving, dry period and lactating stages. The present study showed that the change of persistency of cows at the first parity from total lactacting characteristics was slowly processed, while it was rapidly changed in cows at the second parity stage. Particularly, there was an outstanding difference between the first and second parity cows. Milk yield and composition increased as the age at calving was increased. In addition, milk yield and composition were higher at the first parity on fall compared with others, and those were higher at the more than second parity on fall and winter compared with other parity stages and seasons. The cow of dry group was included into lactating records of more than second parity stage. The data indicated that optimal results arose from 45-70 days of dry period. Milk yield was decreased when dry period was longer or shorter than 45-70 days. The lactating days were divided into 17, 28 and 38 stages to compare the multiplicative correction factors. The factor was effective at 28 stages on the first parity. The total correlation coefficients were 0.93832, 0.95058 and 0.95076 at the present correction factor, 17 stage and 28 stage, respectively. At second parity, the factor was higher in dry group 1 and 3 at 17 stage, and it was higher in dry group 2 at 28 stage compared with others. Therefore, the present study showed that the percent squared bias (PSB), which was calculated from the novel correction factor, was better than previously used correction factors. Also, the present study indicated that the bias of the novel correction factor was improved, and this factor could be more accurate compared with others.

Source and LVis based coincidence summing correction in HPGe gamma-ray spectrometry

  • Lee, Jieun;Kim, HyoJin;Kye, Yong Uk;Lee, Dong Yeon;Kim, Jeung Kee;Jo, Wol Soon;Kang, Yeong-Rok
    • Nuclear Engineering and Technology
    • /
    • v.54 no.5
    • /
    • pp.1754-1759
    • /
    • 2022
  • The activity of gamma-ray emitting nuclides is calculated assuming that each gamma-ray is detected individually; thus, the magnitude of the coincidence summing signal must be considered during activity calculations. Here, the correction factor for the coincidence summing effect was calculated, and the detection efficiencies of two HPGe detectors were compared. The CANBERRA Inc. GC4018 high-purity Ge detector provided an estimate for the peak-to-total ratio using a point source to determine the coincidence summing correction factor. The ORTEC Inc. GEM60 high-purity Ge detector uses EFFTRAN in LVis to obtain the parameters of the detector and source model and the gamma-gamma and gamma-X match estimates, in order to determine the coincidence summing correction factor. Nuclide analyses, radioactivity comparisons, and analyses of reference material samples were performed utilizing certified reference materials to accurately determine the detection efficiencies. For both Co-60 and Y-88, the detection efficiency for a point source increased by an average of at least 12-13%, whereas the detection efficiency determined using LVis increased by an average of at least 13-15%. The calculated radioactivity values of the certified reference material and reference material samples were accurate to within 3% and 6% of the measured values, respectively.