• 비파괴검사학회지
• /
• 제20권4호
• /
• pp.290-295
• /
• 2000

최근 역타시공법 등에 의한 콘크리트 구조물의 시공이 증가 추세에 있다. 이 경우, 자주 발생되는 신 구타설 콘크리트 시공이음부의 공극은 향후 구조물의 구조적인 특성과 내구성 등에 큰 영향을 미치게 된다. 그러나 현재 제안되고 있는 비파괴 검사법으로는 효과적으로 이음부 공극을 평가하기에 많은 한계가 있다. 본 연구에서는 시공이음부의 콘크리트 충전상태를 평가하기 위해 철골철근 콘크리트와 무근 콘크리트 시험체내에 공극을 모의제작한 후, 초음파속도 측정을 실시하고, 화상처리기법을 이용하여 비교적 용이하게 해석 가능한 방법에 대해 검토하였다.

• 한국건축시공학회지
• /
• 제6권4호
• /
• pp.45-52
• /
• 2006

Top Down method is more widely used in downtown construction, recently. As underground construction constitutes a significant portion of the total construction cost and time in Top Down construction, it is important to develop a construction method to reduce the time required in underground works. The purpose of this study is to analyze load carrying capacity of Top Down prefounded columns on different excavation schedule. When several floors are excavated, the valid buckling length of prefounded column is increased and allowable buckling stress is decreased. The result shows that all columns are safe in buckling down to B3 story whether 2 or 3 stories are excavated. However, several columns are not safe from B4 story when 2 or 3 stories are excavated straightly. With these results, a process can be designed that the first three stories in the basement are excavated, and then excavate B4 story after placing concrete on B1 and B2 floor.

• 한국건축시공학회지
• /
• 제1권2호
• /
• pp.191-195
• /
• 2001

When top down method is used, it could be a construction method trouble in column joint, between the former concrete and the latter. It could bring a void and weak concrete in column. The purpose of this study is finding a way to prevent concrete void and concrete suitable for top down , through V-metering for top down column and concrete experiment. To minimize the void of reverse placement joint, It is more effect to use the sheath method then direct method in concrete placement.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.213-221
• /
• 2022

Defects are the risk factors in the construction process of buildings. They cause damage, delaying the construction duration. They especially cause adverse effects on the top-down construction method. This study analyzed the degree of construction delay induced by each work type, focusing on defects in the top-down method. Then, we derived construction delay induction coefficient from different work types in order by using the severity of construction delay per defect and the occurrence probability of defect; this assessment model measures the impact of defects on construction delay for each work type. Furthermore, by comparing each work type based on the defect frequency and the construction delay induction coefficient, we found work types that need to be administered attentively. We identified that plastering work was easy to overlook, requiring caution in defect management. This study provides an efficient defect management system suitable for the buildings that are built using the top-down construction method.

• Nuclear Engineering and Technology
• /
• 제50권6호
• /
• pp.854-859
• /
• 2018

Calculating minimal cut sets is a typical quantification method used to evaluate the top event probability for a fault tree. If minimal cut sets cannot be calculated or if the accuracy of the quantification result is in doubt, the Monte Carlo method can provide an alternative for fault tree quantification. The Monte Carlo method for fault tree quantification tends to take a long time because it repeats the calculation for a large number of samples. Herein, proposal is made to improve the quantification algorithm of a fault tree with circular logic. We developed a top-down iteration algorithm that combines the characteristics of the top-down approach and the iteration approach, thereby reducing the computation time of the Monte Carlo method.

• 기술발표회
• /
• 통권2006호
• /
• pp.45-53
• /
• 2006

Top-Down Construction Method has been considered as the steadiest and the most reasonable method of construction since 1984 when it was applied to LG Da-Dong building and its usage in the field construction has since grown rapidly. With increased cases, engineers not only pursue their studies of R & D continuously but also develop various technical methods based on Top-Down Construction in an era of rapid technological change to adopt them to the field construction. Top-Down Construction meets the needs of these challenging points, such as reduction and eliminates of temporary equipment for supporting permanent structures on the ground, improved method of construction, shortening construction periods, cost reduction, and allows for minimal environmental impact.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2001년도 학술논문발표회
• /
• pp.34-39
• /
• 2001

When top down method is used, it could be a construction method trouble in column joint, between the former concrete and the latter. It could bring a void and weak concrete in column. The purpose of this study is finding a way to prevent concrete void and concrete suitable for top down, through V-metering for top down column and concrete experiment.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 2부
• /
• pp.25-30
• /
• 2011

Almost prefounded columns for top-down construction certainly have construction tolerances in plan and plumbness. Therefore, it is very difficult to connect prefabricated beams to prefounded columns at each floor level after excavation by usual top-down connection method and this usual connection method leads to long construction time, increasing cost and decreasing quality. This paper presents a new method for connecting prefabricated beam to prefounded column with GROUT-JACKET CONNECTION SYSTEM consisting of sleeve, bearing-shear bands and grout. Details and illustrations of the connections and applications by GROUT-JACKET CONNECTION SYSTEM for the top-down construction are also included in this paper.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 춘계 학술논문 발표대회
• /
• pp.31-34
• /
• 2008

Construction of buildings downtown is increasing as much as ever with a strong demand. A Top-Down Method is suitable for its advantage in minimizing its disturbance to the neighborhood. In general, the Pre-founded Column, one of the most important aspects of the Top-Down Method, has been made with an H-Shape Steel Column. However, due to its structural and economical benefits, the usage of CFT(Concrete Filled Tube) columns in the place of Pre-founded Columns is increasing. To promote their applications, we analyze the merits of CFT columns by comparing them with I-Shape columns and propose further research.

• 지질공학
• /
• 제22권1호
• /
• pp.39-48
• /
• 2012

본 연구에서는 흙막이벽 설계시 널리 사용되고 있는 SUNEX 프로그램을 이용하여 Top-Down 공법이 적용된 지중연속벽, 주열식 흙막이벽(CIP벽, SCW벽)의 변형거동을 분석하였다. 해석프로그램에 Rankine의 토압(1857), Terzaghi and Peck의 토압(1967), Tschebotarioff의 토압(1973), 홍원표 윤중만의 토압(1995a)을 적용하여 흙막이벽의 수평변위를 예측하였다. 프로그램 해석결과, 흙막이벽의 수평변위량은 토압의 종류에 따라 큰 차이를 나타내고 있다. 홍원표 윤중만의 토압(1995a)을 적용하여 얻은 흙막이벽의 예측수평변위량이 실측수평변위량과 가장 유사하게 나타났다. 따라서 프로그램 해석시 홍원표 윤중만의 경험토압(1995a)을 적용하면, Top-Down 공법이 적용된 흙막이벽의 변형거동을 비교적 정확히 예측할 수 있다.