• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.7
• /
• pp.518-524
• /
• 2013

A pilot-scale test-bed was operated employing three soils with different grain sizes dredged from the Nakdong River to obtain the design and operation parameters of the multi-purpose filtration pond, such as the filtrate productivity of the filter sand, the appropriate removal period of the surface clogging and the contaminant removal efficiency. The cross-flow velocities were applied stepwise ranging from 0 to 40 cm/sec in order to simulate the various velocities in the artificial stream of the pond. Results showed that a filtrate production rate of 5~3 $m^3/m^2-day$ was maintained by removing the surface clogging every 7 to 13 days and that the filtrate quality was not affected by the factors of the filtrate production rate, the grain size of the filter sand and the cross-flow velocity. Results also showed that most of the removal occurred within 50 cm of the top soil and that the removal efficiencies with the filtration distance of 2.4 m were 80~95% for turbidity, 20~30% for COD, 75~90% for BOD, 5~20% for total nitrogen and 20~60% for total phosphorus, which suggested that particulate matters had a high removal efficiency.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.1
• /
• pp.59-67
• /
• 2005

This paper presents experimental and numerical research results of centrifuge model tests performed to investigate the geotechnical engineering behavior of slag compaction pile as a substitute of sand compaction pile. For centrifuge model tests, bearing capacity of composit soil improved with slag compaction piles, stress concentrations in-between pile and soft clay, settlement characteristics, and failure modes were investigated with slags differing in their relative density. A slag was found to be a good substitute for a sand since the slag compaction pile model showed a greater yield stress intensity up to $30\%$ than the sand compaction pile model under the identical testing conditions. Stress concentration ratio tended to increase with the relative density of slag pile and the clear shear lines in the piles were observed at the depth of $2D{\sim}2.5D$ (D=dia. of model pile) from the top of the piles after loading tests. Numerical analysis with a software of CRISP, implemented with the modified Cam-clay model, was carried out to simulate the results of centrifuge model test. Test results about characteristics of load-settlement curves and stress concentration ratio are in relatively good agreements with numerical estimations.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.18 no.4
• /
• pp.351-354
• /
• 1998

Centipedegrass (Eremochloa ophiuroides) is a popular lawn grass in the southeastern USA. It has a naturally light green color and grows well on a wide range of soil types. Studies show limited morphological variation present in centipedegrass germplasm. To obtain the high morphological variation, plants were established from the irradiated seed at 10 Kr, allowed to interpollinate and harvested bulk seed, and then irradiated again for the next cycles. Morphological characteristics were measured in the 5 genetic varition lines (TC201 : cv. Common and non irradiated, TC202 : 4th cycles, TC241 : 6th cycles, TC306 : 8th cycles, and TC318 : 5th cycles) induced by recurrent gamma radiation. The ranges of variation of recurrently radiated centipedegrass lines < TC202, TC241 and TC306 except TC318(TifBlair) > for the stolons per plant, total stolon length per plant, longest stolon length, leaf length and width at top-most exposed internode were wider than those of non-irradiated line (TC201). Recurrent gamma radiation was very effective to enlarge the ranges of variation of morphological characteristics in reproductive organ like stolons of centipedegrass. The effect of quantity of gamma ray irradiation cycles on the means and ranges of variation in the morphological characteristics of centipedegrass was not regularly tended.

• Journal of Cadastre & Land InformatiX
• /
• v.46 no.2
• /
• pp.27-42
• /
• 2016

Forest accounts for almost 64 percents of total land cover in South Korea. For inventorying, monitoring, and managing such large area of forest, application of remote sensing and geographic information system (RS/GIS) technology is essential. On the basis of spectral characteristics of satellite imagery, forest cover and tree species can be classified, and forest cover map can be prepared. Using three dimensional data of LiDAR(Light Detection and Ranging), tree location and tree height can be measured, and biomass and carbon stocks can be also estimated. In addition, many indices can be extracted using reflection characteristics of land cover. For example, the level of vegetation vitality and forest degradation can be analyzed with VI (vegetation Index) and TGSI (Top Grain Soil Index), respectively. Also, pine wilt disease and o ak w ilt d isease c an b e e arly detected and controled through understanding of change in vegetation indices. RS and GIS take an important role in assessing carbon storage in climate change related projects such as A/R CDM, REDD+ as well. In the field of climate change adaptation, impact and vulnerability can be spatio-temporally assessed for national and local level with the help of spatio-temporal data of GIS. Forest growth, tree mortality, land slide, forest fire can be spatio-temporally estimated using the models in which spatio-temporal data of GIS are added as influence variables.

• Journal of Conservation Science
• /
• v.8 no.1 s.11
• /
• pp.40-50
• /
• 1999

A geotechnical research including observation of the movement of wall-structure, monitoring of groundwater, non-destructive geophysical investigation was conducted to workout a countermeasure to conserve the Muryong Royal Tomb which is the most extinguishable cultural property of the Baekje dynasty. Movement of the structure of Muryong Royal Tomb generally arises to the front chamber and its amplitude in a rainy season is twice of that in the dry season. It represents serious problem concerned about structural safety of the royal tomb in the rainy season. Movement of wall-structure is caused due to the rain infiltration through cracks in the quicklime layer within the soil mound on the top of the royal tomb and the change of the temperature inside of the tomb. Cracks found around the Muryong Royal Tomb are mostly spread in NW and SE of the tomb structure and it harmonizes with the direction of movement of wall-structure of the Muryong Royal Tomb. Counter-plans for safety and prevention of water-leakage that obstruct the movement of wall structures towards the direction of south are very important for the conservation of Muryong Royal Tomb. After getting rid of the cause of structural change by the restoration of the front chamber of the Muryong Royal Tomb, it needs to reinforce the quicklime layer for prevention of waterleak.

• Korean Journal of Environmental Agriculture
• /
• v.12 no.1
• /
• pp.59-67
• /
• 1993

This study was conducted to clarify the translocation and the phytotoxicity of soil treated Heptachlor (0.1ppm) and Heptachlor epoxide (0.1ppm) on Hop plants and Hansam vine. Residues in the soils and the plants were analyzed and phytotoxic patterns were investigated at the different growing stages. Photosynthetic rate and chlorophyll contents were measured. The results were summarized as follows: 1. At the second growing stage, 40 days after transplanting, severe damages by Heptachlor were observed on root of Hop. Growth rate on top and root parts of Hop was retarded from the third growing stage, 70 days after transplanting. The damages seemed to be caused by Heptachlor epoxide rather than by Heptachlor. 2. Residues of Heptachlor and Heptachlor epoxide in the plants, Hops and Hansam vine, were high at the second growing stage in comparison with those at the other stages. Residual levels in the plant parts were in order of root> stem> leaf. 3. Inhibition of photosynthetic rate was more serious in Hop plants than those in Hansam vine. The photosynthetic rate was suppressed at the second growing stage by Heptachlor epoxide and greatly reduced at the third growing stage. 4. Chlorophyll contents were not significantly changed in Hops and Hansam vine. Decreasing trends of the chlorophyll contents in both plants treated with the pesticides were similar to those of control plants.

• The Journal of Engineering Geology
• /
• v.20 no.2
• /
• pp.121-126
• /
• 2010

Current technology for radioactive waste disposal facility is operated as part of KURT site characterization in terms of reliability assessment is conducted to expand. In this study, a geological model of KURT surrounding area on the basis of flow characteristics of the site-scale hydrogeological study was about. Distributed in the study area into four boreholes were plotted using the stereo net NS, NW, EW, Low-angle fracture group was able to identify the components of geological models and include top soil layer, belt of weathering, Low-angle fracture zone, fracture zone was divided into. Separated by fracture of the hydraulic test of through the groundwater aquifer that provides the flow hydraulic conductivity and insulation hydraulic affecting the slope of the normal distribution for the size and direction by performing statistical analysis of fracture in the direction of local ns The advantage was confirmed. In addition, Low-angle fracture hydraulic conductivity of the value of 3.61e-07 m/s has a value greater than the major fracture, the fracture zones exist in the base rock and base rock and the hydraulic characteristics of the different methods applied and had to have a different interpretation judged by was.

• Korean Journal of Environment and Ecology
• /
• v.34 no.4
• /
• pp.304-317
• /
• 2020

This study conducted selected two sites in Geumnamhonam and four sites in Honam-Jeongmaek for vegetation survey with consideration to the location environment and anthropogenic impacts to investigate the vegetation structures of the Geumnamhonam-Jeongmaek·Honam-Jeongmaek ridge areas. Using TWINSPAN (two-way indicator species analysis), each of the two ridge areas were categorized into seven plant communities. The differential species in the TWINSPAN technique indirectly represent the environmental factors of plant communities, and the community types of the two ridge areas were divided based on environmental factors such as altitudes above sea level, soil moisture, and disturbance. These results were in harmony with the environmental factors of the DCA (detrended correspondence analysis) axis 1. In the low-lying areas of both ridge areas, afforestation tree species such as Pinus rigida and P. thunbergii were in competition with native tree species. As such, in the low-lying areas, artificial vegetation disturbance was severe due to afforestation and development projects. In relatively highland areas, such as upper slopes, and top areas, in the ridge, the vegetation type with the dominance of Quercus mongolica, Q. variabilis, and P. densiflora was preserved well. As for differences between the two ridge areas, communities dominated by Q. mongolica were distributed widely in Geumnamhonam-Jeongmaek because of the altitudes above sea level, and the latitude of this ridge area are higher than those of Honam-Jeongmaek. On the other hand, communities dominated by P. densiflora were distributed along with communities dominated by Q. mongolica, and communities dominated by Q. variabilis appeared in Honam-Jeongmaek because it is adjacent to the south coast. In quantitative vegetation analysis such as TWINSPAN and DCA, changes in species composition and the extracting environmental factors that cause the changes are important. To that end, the removal of accidental emergent species, the establishment of an investigation plan that assumes environmental factors, and the selection of the optimal analytical method suitable for the characteristics of the survey data are necessary.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.2 s.48
• /
• pp.51-62
• /
• 2006

In the companion paper (I-Problem Statements of the Current Seismic Design Code), the current Korean seismic design code is required to be modified considering site characteristics in Korea for the reliable estimation of site amplification. In this paper, three site classification methods based on the mean shear wave velocity of the top 30m $V_{S30}$, fundamental site periods $(T_G)$ and bedrock depth were investigated and compared with each other to determine the best classification system. Not enough of a difference in the standard deviation of site coefficients $(F_a\;and\;F_v)$ to determine the best system, and neither is the difference between the average spectral accelerations and the design response spectrum of each system. However, the amplification range of RRS values based on $T_G$ were definitely concentrated on a narrow band than other classification system. It means that sites which have a similar behavior during earthquake will be classified as the same site category at the site classification system based on $T_G$. The regression curves between site coefficients and $T_G$ described the effect of soil non linearity well as the rock shaking intensity increases than the current method based on $V_{S30}$. Furthermore, it is unambiguous to determine sue category based on $T_G$ when the site investigation is performed to shallower depth less than 30m, whereas the current $V_{S30}$ is usually calculated fallaciously by extrapolating the $V_s$ of bedrock to 30m. From the results of this study, new site classification system based on $T_G$ was recommended for legions of shallow bedrock depth in Korea.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.3
• /
• pp.57-65
• /
• 2018

This study adopts high resolution 3D X-ray CT imaging technique to visualize and evaluate the internal structure of experimentally frozen soils. Temperature and elastic wave velocity are also measured during the freezing process. The X-ray images of frozen specimens reveal that no changes in internal structure are observed for sand specimen, whereas systematic growth pattern of pore ice is observed within clay specimen. The freezing patterns are then quantified by a set of X-ray images with the aid of two-point correlation method by computing characteristic length Lr. The results reveal that characteristic length for pore ice freezing pattern in clay linearly increases with respect to the distance from the cooling source, so that Lr at the bottom layer is 2.5 times greater than the top layer when freezing process is completed. Furthermore, during the freezing process, local temperature differences are not observed in sand, but observed in clay specimen due to its relatively low thermal conductivity.