• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.12 no.2
• /
• pp.29-39
• /
• 2009

Research was initiated to investigate a vegetation characteristics of the winter season by seeding periods. 3 seeding periods (Mid-December seeding plot, Late January seeding plot and Early March seeding plot) and 3 zones (the top zone, the middle zone and the bottom zone) in each plot were treated with 3 replications on the experimented slope. Data such as vegetation coverage (%), soil hardness (MPa), temperature ($^{\circ}C$) and moisture (%) content were analyzed. The vegetation coverage was high in Early March seeding plot, medium in Mid-December, and low in Late January seeding plot. Early March seeding plot was effective in moisture content, soil hardness, and temperature for the growth of vegetation when compared to Late January seeding plot and Mid-December seeding plot. From the standpoint of coverage ratio of plant species, the coverage of Dianthus sinensis and Albizzia julibrissin were high in the Late January seeding plot whereas the coverage of Lotus corniculatus and Cool-season turfgrass were high in Early March seeding plot. These results indicated that the high vegetation coverage of Dianthus sinensis and Albizzia julibrissin in Early March seeding plot was caused by scarification during winter season. There was no difference observed in plant height regardless of seeding periods except in early surveying time of May and June after seeding. As far as each zone of the plot was concerned, the vegetation coverage was high. in the bottom zone, medium in the middle zone and low in the top zone. The bottom area of the experimented slope was high in moisture content when compared to the middle zone and the top zone.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.197-197
• /
• 2017

In order to reduce the loss of perilla seeds at harvesting stage, different seeding methods and harvesting time had been applied to upland soil in NICS (National Institute of Crop Science), RDA, Milyang, Korea. The seeding methods were divided into hill and drill seeding, and harvesting time were 40%, 60%, 80%, and 100% color-changing of top cluster perilla (cv Deulsaem) seeds. Higher plant height and lowest flower cluster, thinner culm thickness was observed in drill seeding treated plot than hill seeding treated plot. However, field lodging occurred lower at drill seeding treatment (lodging degree 3) than hill seeding plot (lodging degree 5). Harvesting time affected the loss of perilla seeds and the loss rate of perilla seeds were investigated at different color-changing of top flower cluster. When seeds were harvested at 40%, 60%, 80%, and 100% color-changing of top cluster perilla seeds, the loss rate of hill and drill seeding showed no significant differences however the loss rated of 40, 60, 80, and 100 % color-changing of top flower cluster were 1.9% to 3.0%, 3.8% to 3.9%, 8.0% to 10.2%, and 16.1% to 22.7%, respectively. The harvesting time had no significant effects on the yield of perilla seeds. These results suggest that optimum harvesting time of perilla could be recommend at the 60% color-changing of top cluster to reduce the loss of perilla seeds.

• Korean Journal of Environmental Agriculture
• /
• v.17 no.2
• /
• pp.150-155
• /
• 1998

To investigate effects of organic matter application on heavy metal uptake of infant rice seeding, the various amount of organic matter(peat and $Bio-com^{(R)}$)was applied on Cd or Cu treated nursery bed soil. No growth difference was observed up to 20mg/kg of Cu treatment. Above 20mg/kg of Cu treatment, the seeding height and top dry weight were decreased but the Cu uptake by seeding was increased with increasing Cu treatment level. The mat formation was poor above 20mg/kg of Cu treatment, however, the seeding peat application level. All peat treatment resulted better mat formation than control. The seeding height and top dry increasing Cd treatment level. The mat formation was not effected by either Cd treatment level or organic matter sources. The effect of peat and $Bio-com{(R)}$ application on Cd uptake by infant rice seeding was not observed at all Cd treatments level.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.3
• /
• pp.236-242
• /
• 1999

To examine the seedling stand and growth as affected by early seeding dates of dry direct seeded rice in the Honam plain area of Korea, Dongjinbyeo was seeded at six seeding dates from early March to late April in rice fields of silty loam soil(Jeonbuk series) at the National Honam Agricultural Experiment Station (NHAES) for two years, 1996 and 1998. Seedling stand decreased slightly. with an early seeding date, but it produced more than the optimum seedling number except for the seeding of 25 March in 1996. Days to emergence was significantly longer, as seeding date was earlier, and days to emergence by early seeding was shortened only by 8 days because the mean air temperature was lower in 1996 than average, while in 1998, the reduction effect was nine to twenty five days because the mean air temperature was higher than average. In early seeding, various weeds occurred at the emergence date of rice and dominant weeds were Alopecurus aequailis, Ludwigia prostata and Rorippa islandica. NH$_4$$^{+}$ -N content in the soil at the 5th leaf stage and maximum tillering stage were lower, as the seeding date was earlier when nitrogen was split applied as basal and top dressed in 1996, while it was not significantly different among seeding dates when nitrogen was intensively applied as a top dressing in 1998. Tiller number at the maximum tillering stage and panicle number/m$^2$ were more, as seeding date was earlier in 1996, while it was not different in 1998. Filled grain rate and 1,000 grain weight was not different among the seeding dates. Milled rice yield was significantly decreased in the seeding before the middle of March, but in the seeding after late March, it was not varied when compared with the normal seeding date in 1996, while in 1998, there was no difference among seeding dates. From the above results, in consideration of seedling stand, weed occurance, rice growth and milled rice yield, the critical optimum early seeding time in the southern plain area may lie in early April. But it was suggested that when soil moisture is proper for seeding practices, seeding amount is increased and nitrogen is applied after plumule emergence of rice, milled rice yield may not be reduced in the seeding of middle or late March, compared with the seeding in April.l.

• Progress in Superconductivity and Cryogenics
• /
• v.19 no.2
• /
• pp.14-18
• /
• 2017

This study presents three dimensional (3-D) seeding technique which is a modification of interior seeding. 3-D seeding is beneficial for shortening the processing period and enhancing the magnetic properties of REBCO bulk superconductors fabricated by melt growth. Oxygen channels were provided by using divided powder compacts instead of by using a rubber insert. Microstructure observations revealed that the grains grown from the seeds impinged each other and formed low angle grain boundaries of (001)/(001). It has been shown that the 3-D seeding technique reduces the volume fraction of a-c growth sector and thereby maximizes the area of a-b growth sector which attribute to the high magnetic characteristics of single grain REBCO bulk superconductors.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.6
• /
• pp.662-668
• /
• 2016

No-tillage dry-seeding of rice can offer potential benefits by reducing time and labor cost compared with conventional tillage practices. This study was conducted to investigate the effects of no-tillage dry-seeding on rice growth and soil hardness in comparison with other rice cultivation methods, machine transplanting and wet-hill-seeding on puddled paddy. The seedling stand fell within optimum range for both no-till dry-seeding and wet-hill-seeding on puddled paddy. Plant height, number of tillers and SPAD values in no-tillage dry-seeding cultivation were higher than those observed in other methods. There were no significant differences in grain yield of rice among three cultivation methods. The quality characteristics of milled rice grown in no-tillage dry-seeding were similar to those grown in other cultivation methods. Soil hardness in top 10 cm depth was significantly higher in no-tillage dry-seeding than other cultivation methods, while soil hardness below 10 cm depth was highest in machine transplanting cultivation. Results indicate that no-tillage dry-seeding practice is comparable to conventional tillage system in terms of seedling establishment, growth, yield and grain quality.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.5
• /
• pp.335-338
• /
• 2000

The technology of direct-seeding in rice cultivation is an innovation mainly induced by factors in market economy and is rapidly diffused among individual farmhouses. Because the effect of technology can be affected by many factors under various farming circumstances, the impact and stability of the direct-seeding technology compared with transplanting was analyzed under various topographical regions. Yield in direct-seeding was higher in plains, although the farm size producing higher yield was quite different depending on the topographical regions. In the direct-seeding cultivation of rice, man-labor hours was reduced by about 38 percent and the reduction rate showed little difference among topographical regions. Fertilizer was used about 11 percent more but the increase rate varied from 3 to 17 percent depending on regions with higher rates in plains. Application of agricultural chemicals was also increased about 9 percent in direct-seeding, but the increase rate was as high as 12 percent in suburbs. More fertilizer and agricultural chemicals were used in direct-seeding cultivation by farmhouses implementing both direct-seeding and transplanting than by those implementing direct-seeding only. Use of more fertilizers and agricultural chemicals in direct-seeding in all regions may indicate its technical instability. Major problems causing the technical instability of direct-seeding cultivation should be solved by comprehensive research considering various farming circumstances such as topographical features rather than just a top-down style research and extension.

• Korean Journal of Soil Science and Fertilizer
• /
• v.47 no.6
• /
• pp.425-431
• /
• 2014

Most fields in highland areas are covered with rye or hairy vetch for conservation during a fallow. However, using cover crops needs an effort to sow, and this makes top soil more vulnerable to loss due to surface disturbances. The aims of this study were to develop an automatic seeding-regulator device using a low-price, extensive-use GPS sensors and a DC motors and to evaluate a working efficiency of it after adaptation to partial tillage machine for reducing seeding effort. The amount of runoff water and soil loss was evaluated with partial tillage and simultaneous-seeding after harvesting soybean, in 17% slope lysimeters. In results, the seeding amount with the machine speed was stable between $0.5{\sim}0.8m\;s^{-1}$ of working sections. The automatic control device of seeding-rate could be enough to solve the slip problems of power selecting supply system or five four-wheel drive device. In partial tillage and simultaneous seeding, runoff water was 11.6% ($1.8m^3ha^{-1}$) of the scatter-seeding control ($15.5m^3ha^{-1}$) and soil loss was 13.2% ($7kg\;ha^{-1}$) of the scatter-seeding control ($53kg\;ha^{-1}$). These results suggest that partial tillage and simultaneous-seeding methods are very effective in decreasing work effort and soil loss of sloped land.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.3
• /
• pp.319-323
• /
• 2013

Red rice (Oryza sativa L.) is one of the most important weeds in most of rice cultivating area. Seed germination related experiments were done to evaluate germination percentage, emerging speed, and initial growth by seeding depth and soil moisture level. The four experiments, 1) temperature, 2) seeding depth, 3) soil moisture level, and 4) seeding position, were done with combination each other on phytotron for germination and seedling growth related experiments of redrice. The treatments levels were: 1) Temperatures were 20/15(Low), 25/20 (Mid.), $30/25{\circ}C$ (High), (day/night), 2) seeding depths were 0, 3, 6 cm, 3) soil moisture levels were 25, 35, 45, 55, 65% (VWC, %), and seeding position were furrow, ridge, ridge-top. The germination percentage and germination speed of red rice were higher and faster than Daeanbyeo in low temperature. Yoeongcheon redrice of seed germination percentage and seedling length was more vigor than Hapcheon red rice. Red rice was not germinated on 6 cm seeding depth until 11 days after seeding except high temperature treatment. Germination percentage increased with increasing soil water percentage in low temperature, however it was greatest in 45% in high soil moisture level between 25% to 65% in low temperature. Seed germination percentage and seedling length were not significantly different among the soil water level in mid- and high temperature levels. In conclusion, red rice could germinate in top soil (<6 cm) in mid- and high temperature range, so we might be control red rice by spraying herbicide after germination of red rice combined with delayed rotary cultivation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.6
• /
• pp.731-737
• /
• 1995

This experiment was carried out at National Crop Experiment Station in 1994 to obtain basic information of growth characters and yield of rice under various nitrogen split application methods on different soil textures in direct seeding on dry paddy. Hwaseongbyeo sown on April 27 by flat drill seeding, and irrigation was done at 3 leaf stage after seedling establishment. Number of seedling stand was 159~177 seedlings per $m^2$ regardless of soil texture and nitrogen application method. Number of panicle per unit area in loam was higher than in sandy loam, and it also was higher in top dressing plots, which were 3 times application at rate of 40-30-30% (3rd leaf stage -7th leaf stage -panicle initiation stage) and 4 times application 10-30-30-30%(basal-3rd leaf stage -7th leaf stage -panicle initiation stage), than in conventional method. Leaf colour, leaf area index and dry matter production at heading stage were highest at top dressing plots among the nitrogen application methods in both sandy loam and loam. Lodging index in top dressing plots increased by low breaking weight with long culm. There were field lodging of degree 3 in top dressing plots. Rice yield in sandy loam, loam increased by 7~9%, 6~9% in top dressing of nitrogen, respectively.