• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.2
• /
• pp.69-74
• /
• 2004

In general the surge pressure generated in hydraulic systems causes noise, vibration and odd effect to the system. To reduce the surge pressure, high frequency PWM control of 20KHz was attempted. To estimate the braking noise caused by surge, a vehicle equipped with on-board ABS hydraulic modulator has been experimented with respect to the various breaking condition. Thorough this experiments, it was found that breaking noise has been reduced using high frequency PWM control method compare with low frequency method. To evaluate high frequency control m practice, including verification of general functionality, EMI tests was experimented. Its was found that it is necessary to have the solution to electromagnetic interference(EMI) generated by switching elements.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.314-318
• /
• 2002

Several types of burrs form on the edges of all machined and stamped parts. These burrs must be removed to prevent interference fits or short circuits, to improve fatigue life or to prevent injury. Despite the full or partial automation of FMC or FMS, deburring operations to obtain workpiece with fine surface quality are difficult to be automated since the occurrence and condition of burr are not constant. This study focused on developing micro-deburring technique for small electro- parts produced by press process. The successful performance was demonstrated by deburring experiment using the powder blasting.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.4
• /
• pp.119-125
• /
• 2008

A new type of swivel unit is suggested in order to complement weak points of the existing. This new type of Swivel unit is developed by adopting a spring type cable which has elasticity and restoring force. To minimize the troubles in the process of manufacturing during operating the new type system, strength analysis and the check of interference between parts are accomplished with CATIA. The check of rotating performance is also carried out to determine the diameter and length of spring type cable by SimDesigner motion analysis. Swivel unit used in the robot spot welding is developed with spring type cable and its usefulness in the industrial field is verified through experiments. This system has been registered for patent.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.7
• /
• pp.1378-1384
• /
• 2011

In this paper, the electromagnetic shielding performance of a BiMODAL Tram is investigated by means of an electromagnetic analysis tool, called HFSS. For the purposed of doing this, first, three-dimensional finite element modeling for the tram including electronic devices and engine room is carried out. Then, for quantitatively assessing the electromagnetic shielding performance of the tram's body, concentration indexes for electric field magnitude and time-average stored electric energy are introduced. From numerical results, it is inferred that the tram's body can protect the electronic devices and engine room against external electromagnetic waves from 30 MHz to 100 MHz.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.11
• /
• pp.1271-1278
• /
• 1992

In this paper, a practical model for evaluating and comparing the bit error rates(BERs) due to adjacent channel mutual interference in a synchronous and asynchronous frequency hopped spread spectrum multiple access(FH-SSMA) radio communication systems is proposed. After implementing the actual FH radio in both the sychronous and asynchronous case, the BER is computed and measured. An experiment of this system in mobile tactical environments reveals that the performance in the asynchronous case is lower than that of the synchronous case. The computer simulation model is an efficient tool for designing practical FH radios in mobile communication environments.

• Journal of information and communication convergence engineering
• /
• v.9 no.4
• /
• pp.391-395
• /
• 2011

Cognitive radio (CR) technique is a useful tool for improving spectrum utilization by detecting and using the vacant frequency bands while avoiding interference to the primary user. The sensing performance in a CR network can be improved by allowing some CR users to perform cooperative spectrum sensing. In this paper, we propose a new sensing algorithm that utilizes an adaptive energy threshold for cooperative spectrum sensing in which a changeable energy threshold is adopted by the CR users for improving local sensing performance. Through the proposed scheme, the reliability of global decision can be enhanced mainly due to the improvement in local sensing performance.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.920-923
• /
• 2003

An wearable electrocardiogram (ECG) monitoring system is a widely used non-invasive diagnostic tool for ambulatory patient who may be at risk from latent life-threatening cardiac abnormalities. In this paper, we have a portable ECG monitoring system with conductive fiber which was characterized by the small-size and the low power consumption. The system consists of conductive fibers, one-chip microcontroller, ECG preprocessing circuit, and monitoring software to be able to record and analyze in PC. ECG preprocessing circuit is made of pre-amplifier with gain of 10, band-pass filter with bandwidth of 0.5-120Hz and 2.5V offset circuit for A/D conversion. ECG signals obtained by sensor are included with corrupted noises such as a baseline wandering, 60 Hz power noise and interference noise by body movement. For cancellation corrupted noises in signals obtained by conductive fiber, we used the wavelet decomposition of wavelet transforms in MATLAB toolbox.

• International Journal of Computer Science & Network Security
• /
• v.22 no.1
• /
• pp.189-198
• /
• 2022

As the number of people using the Internet increases, a new application known as the Internet of Things (IoT) has been emerged. Internet of Things makes it easier for machines and objects to exchange, compute, and coordinate information autonomously without human interference. It is a tool for attaching intelligence to a variety of contemporary objects in houses, hospitals, buildings, vehicles, and even cities. As a new emerging technology, the focus in current IoT surveys does not shed the light on deep understanding for IoT fundamentals, architectures, challenges, and solutions. For this reason, the objective of this paper is to introduce specifications for IoT definitions, characteristics, functional blocks, and different architectures as a cement for better understanding. Additionally, we present current documented IoT challenges, with the existing available solution for each challenge.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1161-1165
• /
• 2009

Safety of workers and productivity in construction site are affected according to the conflict status of work spaces which are performed at a time. The interference among the work spaces in construction site should be minimized because it becomes a blocking factor that causes construction delay and low productivity. Those factors can be managed by reasonable H&S (Health & Safety) practice. This research suggests the requirements of H&S practice and rules to establish the strategy of H&S management based on the literature reviews related to H&S rule. The suggested H&S rule can be visualized for searching space conflict point if the rule is linked with visual simulation tool. Accordingly the research results can be used for improving and visualizing construction productivity by work space control in 4D/nD CAD system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.7
• /
• pp.521-527
• /
• 2014

Most of Sea Surveillance Radar(SSR)s which are used in Vessel Traffic Service are Magnetron-based Non-Coherent Method and use the pulse integration technique having a signal to noise ratio enhancement function to satisfy a surveillance performance about target. Especially, Pulse Integration technique has an effect on target serveillance performance through signal to noise ratio, in addition, has an effect to improve a signal interference and noise spike. In this paper, we have a simulation experiment by using MATLAB simulation tool for appling a pulse integration technique in VTS system using a Non-Coherent radar, and verify an optimum pulse integration technique through out performance analysis between frequently use pulse integration techniques.