• 한국산업융합학회 논문집
• /
• 제25권6_2호
• /
• pp.1003-1008
• /
• 2022

This paper proposes a method related to fault tolerance operation and characteristic analysis of asymmetric 6-phase permanent magnet synchronous motor. In general, motor drive systems with multi-phase structures can be continuously operated despite a reduction of power and speed by using a phase changeover or control techniques according to the failures. As a result, it is widely used in industrial fields such as aviation and defense, which require high efficiency and high reliability. In this paper, the second order ripple of the electrical fundamental freuqnecy occurs in the dq-axis currents of the synchronous coordinate system through mathematical analysis according to the switch open of the dual 3-phase inverter. Therefore, the fault tolerant operation method is presented by applying the fault detection method with a constant cycle for continuous operations. The effectiveness of the proposed fault tolerance operation method is verified through the several experiments.

• 항공우주시스템공학회지
• /
• 제17권2호
• /
• pp.9-15
• /
• 2023

인공위성의 축소 열모델 생성 작업은 궤도 열해석의 시간 단축과 발사체 연동 열해석 수행을 위해 인공위성 제작 프로젝트에서 반드시 한 번 이상 수행하게 된다. 축소 열모델 생성 방법은 여러가지가 거론되고 있지만, 실무적으로는 직관적이면서도 편리한 등온격자생성법이 가장 많이 사용되고 있다. 그러나 아직까지 등온격자생성법의 자동화에 관한 연구는 부족한 실정이다. 본 논문에서는 온도 허용오차와 고정 노드를 고려한 등온격자생성법 기반 위성 축소 열모델 자동 생성 방법을 제안하였다. 서로 다른 세 가지의 온도 허용오차 케이스를 이용하여 방법론을 검증하였으며, 평균 온도 차이는 ECSS의 축소 열모델 생성 가이드라인(< 2 K)을 만족함을 확인할 수 있었다.

• Design & Manufacturing
• /
• 제6권1호
• /
• pp.45-51
• /
• 2012

The main goal of this paper is to establish an interference tolerance for determining optimal amount of clearance in the shaft-bearing system supported by radial ball bearings. The 2-D frictional contact model was employed for the FE analysis between the shaft and the inner raceway. Several examples were simulated using different material properties for the solid shaft. Efforts were focused on the deformation applied in the radial direction to select suitable bearings. The analysis results showed that the initial axial preload applied on the bearings plays a significant role to reduce bearing fatigue life. The proposed design parameters obtained by numerical simulations can approximately predict a rate of bearing life reduction as a function of shaft diameter ratio. This analysis can also be used to calculate the optimal initial radial clearance in order to obtain a shaft-bearing system design for high accuracy and long life.

• Genomics & Informatics
• /
• 제14권4호
• /
• pp.181-186
• /
• 2016

Glucose tolerance tests have been devised to determine the speed of blood glucose clearance. Diabetes is often tested with the standard oral glucose tolerance test (OGTT), along with fasting glucose level. However, no single test may be sufficient for the diagnosis, and the World Health Organization (WHO)/International Diabetes Federation (IDF) has suggested composite criteria. Accordingly, a single multi-class trait was constructed with three of the fasting phenotypes and 1- and 2-hour OGTT phenotypes from the Korean Association Resource (KARE) project, and the genetic association was investigated. All of the 18 possible combinations made out of the 3 sets of classification for the individual phenotypes were taken into our analysis. These were possible due to a method that was recently developed by us for estimating genomic associations using a generalized index of dissimilarity. Eight single-nucleotide polymorphisms (SNPs) that were found to have the strongest main effect are reported with the corresponding genes. Four of them conform to previous reports, located in the CDKAL1 gene, while the other 4 SNPs are new findings. Two-order interacting SNP pairs of are also presented. One pair (rs2328549 and rs6486740) has a prominent association, where the two single-nucleotide polymorphism locations are CDKAL1 and GLT1D1. The latter has not been found to have a strong main effect. New findings may result from the proper construction and analysis of a composite trait.

• The Plant Pathology Journal
• /
• 제29권2호
• /
• pp.209-220
• /
• 2013

Root colonization by Pseudomonas chlororaphis O6 induces systemic drought tolerance in Arabidopsis thaliana. Microarray analysis was performed using the 22,800-gene Affymetrix GeneChips to identify differentially-expressed genes from plants colonized with or without P. chlororaphis O6 under drought stressed conditions or normal growth conditions. Root colonization in plants grown under regular irrigation condition increased transcript accumulation from genes associated with defense, response to reactive oxygen species, and auxin- and jasmonic acid-responsive genes, but decreased transcription factors associated with ethylene and abscisic acid signaling. The cluster of genes involved in plant disease resistance were up-regulated, but the set of drought signaling response genes were down-regulated in the P. chlororaphis O6-colonized under drought stress plants compared to those of the drought stressed plants without bacterial treatment. Transcripts of the jasmonic acid-marker genes, VSP1 and pdf-1.2, the salicylic acid regulated gene, PR-1, and the ethylene-response gene, HEL, also were up-regulated in plants colonized by P. chlororaphis O6, but differed in their responsiveness to drought stress. These data show how gene expression in plants lacking adequate water can be remarkably influenced by microbial colonization leading to plant protection, and the activation of the plant defense signal pathway induced by root colonization of P. chlororaphis O6 might be a key element for induced systemic tolerance by microbes.

• 원예과학기술지
• /
• 제33권3호
• /
• pp.309-316
• /
• 2015

In this experiment, five commercial cultivars and one wild species of loquat were used to investigate frost tolerance and enzymatic activities in leaves and young fruits under cold stress at $-3^{\circ}C$. The frost injury, malondialdehyde (MDA) content, and oxygen-scavenging enzyme activities of superoxide dismutase (SOD), peroxidase (POD), catalase (CAT) and ascorbate peroxidase (APX) were studied. This results showed that the wild species 'Wild Oak-leaf' loquat was the most frost tolerant among accessions tested, followed by the cultivar 'Golden Block'. Other cultivars, 'Wu Gong Bai', 'Taicheng 4', 'Xiangzhong 11' and 'Zaozhong 6', were relatively weak in frost tolerance. The enzymatic activities of SOD, POD and CAT increased initially and then decreased as the exposure time increased. However, the enzymatic peak occurred later in the frost-tolerant accession than in the frost-sensitive accession. The correlation coefficients of MDA contents between leaves and immature fruits were from 0.93 to 0.99 in the five commercial loquat cultivars. For the 'Wild Oak-leaf' loquat, the correlation coefficients of MDA and POD were 0.98 and 0.95, respectively, but the coefficients for SOD, CAT and APX were relatively low. In general, there were good correlations between loquat leaves and immature fruits in MDA content and enzyme activities. These results indicate that analysis of these physiological and biochemical activities in loquat leaves could potentially be used to predict the cold tolerance in loquat at immature fruit stage and to accelerate breeding programs for cold tolerance in loquat.

• 산업경영시스템학회지
• /
• 제39권4호
• /
• pp.1-6
• /
• 2016

As manufacturing industries become globalized, product design affects every area of organization. The design sets the goals for a number of different departments, so if it fails to effectively communicate these goals, the entire organization is less efficient. In addition, To communicate clearly, the design must represent a product that meets its technical specification. GD&T (Geometric Dimensioning and Tolerancing) is one of the most important factors, which has an effect on efficiency of manufacture system, in designing products. However, most of designers in different industries are prone to ignore the importance of GD&T. To analyse the importance of GD&T compliance with international standards for design drawing, a comparison analysis of the difference between two methods, composite profile control and multiple single segment profile control, is performed on three different cases and suggests how it used to be more suitable. Composite profile tolerance is specified by a dual feature control frame that has one profile symbol specified with two lines of tolerance information. Whereas a multiple single segment profile control is when two or more single segment profile callouts are used to define the location and/or orientation and/or size and/or form of a part feature. In this study, the following results will be provided : a clear definition and an obvious difference of the tolerance zone, datums and datums sequence and minimization of tolerances. On this study, composite profile tolerance and multiple single segment profile tolerance were discussed. Next steps of research will consist on reaching more accurate results for profile control. Further research will be focused on dealing with the remaining 14 symbols of GD&T.

• 한국축산식품학회지
• /
• 제36권1호
• /
• pp.37-43
• /
• 2016

Cardiovascular and cerebrovascular diseases seriously harm human health, and Bifidobacterium is the most beneficial probiotic in the gastrointestinal tract of humans. This work aimed to screen cholesterol-lowering Bifidobacterium from Guizhou Xiang Pig and evaluate its tolerance to oxygen, acid, and bile. Twenty-seven aerotolerant strains with similar colony to Bifidobacterium were isolated through incubation at 37℃ in 20% (v/v) CO₂-80% (v/v) atmospheric air by using Mupirocin lithium modified MRS agar medium, modified PTYG with added CaCO₃, and modified PTYG supplemented with X-gal. Ten strains with cholesterol-lowering rates above 20% (w/w) were used for further screening. The selected strains’ tolerance to acid and bile was then determined. A combination of colony and cell morphology, physiological, and biochemical experiments, as well as 16S rRNA gene-sequence analysis, was performed. Results suggested that BZ25 with excellent characteristics of high cholesterol-removal rate of 36.32% (w/w), as well as tolerance to acid and bile, was identified as Bifidobacterium animalis subsp. lactis. To further evaluate Bifidobacterium BZ25’s growth characteristic and tolerance to oxygen, culture experiments were performed in liquid medium and an agar plate. Findings suggested that BZ25 grew well both in environmental 20% (v/v) CO₂-80% (v/v) atmospheric air and in 100% atmospheric air because BZ25 reached an absorbance of 1.185 at 600 nm in 100% atmospheric air. Moreover, BZ25 was aerotolerant and can grow in an agar medium under the environmental condition of 100% atmospheric air. This study can lay a preliminary foundation for the potential industrial applications of BZ25.

• 한국광학회지
• /
• 제33권5호
• /
• pp.210-217
• /
• 2022

Window 밀폐형 광 커넥터의 정렬오차로 인해 발생하는 광 손실을 감소시키기 위해 정렬용 기구물의 허용 공차에 대한 연구를 진행하였다. 광섬유 간 결합을 위해 사용되는 광 커넥터는 광신호 전달 및 광통신 시스템의 전달 거리 증가를 위해 높은 광효율을 유지 및 향상시키는 것이 중요하다. Window 밀폐형 광 커넥터의 경우 정렬용 기구물을 통해 광학계를 정렬하며, 이때 두 커넥터를 결속한 채 사용하기 때문에 구성요소가 고정되어 추가적인 정렬이 불가능하다. 광 커넥터의 광학계 정렬을 위해 사용되는 하우징 시스템 및 정렬 핀이 가지는 정렬오차는 광 손실을 발생시켜 광통신 시스템의 심각한 문제를 야기한다. 따라서 해당 광 커넥터의 정렬용 기구물 제작 시 요구되는 허용 공차에 대한 연구를 위해 광 커넥터의 광학 부품인 볼렌즈와 window의 공차 분석을 진행하였다. 또한, single-mode와 multi-mode 광 커넥터 광학계를 각각 구현하여 광 효율 시뮬레이션을 진행하고, 그 결과를 기반으로 정렬용 기구물에 대한 허용 공차 값을 도출하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1348-1351
• /
• 1997

The federated Kaman filter(FKF) is being widely used in many multisensor navigatiion systems. It is know that the FKF has advantages of simplicity and fault-tolerance over other decentralized filter techniques. In this paper, optimal and suboptimal FKF configuratiions are mentioned and a covariance analysis technique for the suboptimal FKF is newly presented. The suboptimal FKF configuration, known as No-reset(NR) mode, has better fault tolerance capability than the optimal FKF coniguratioin. In the suggested technique, a suboptimal fusion process of FKF is considered a swell as suboptimal gains of local filters. An upper boun of error covariance for suboptimal FKF is derived. Also, it is mathematically shown that this bound is smaller thanexisting bound in the literatrue. A vehicle-navigaion system is designed using the FKF. In thissystem, a map constraing equation is introduced and used as a measurement equatioin of Kalman filter. Performance analysis is done by the suggested covariance analysis techniques.