• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.7
• /
• pp.4554-4561
• /
• 2014

In recent years, several paradigms have been identified to simplify the design of fault-tolerant distributed applications in a conventional static system. Leader Election is among the most noticeable, particularly because it is closely related to group communication, which provides a powerful basis for implementing active replications among other uses. On the other hand, despite its usefulness, to our knowledge, no study has focused on this problem in a mobile computing environment. The aim of this paper was to propose an algorithm for the leader election protocol in a fixed station based wireless networks environment. The election algorithm is much more efficient than other election algorithms in terms of the fault tolerance.

• Journal of Ecology and Environment
• /
• v.41 no.3
• /
• pp.99-106
• /
• 2017

Background: Plants over-expressing Arabidopsis ABF3 (abscisic acid-responsive element-binding factor 3) have enhanced tolerance to various environmental stresses, especially drought. Using terminal restriction fragment length polymorphism (T-RFLP) analysis, we compared the rhizosphere-associated structures of microbial communities for transgenic potato containing this gene and conventional "Jopoong" plants. Results: During a 2-year field experiment, fungal richness, evenness, and diversity varied by year, increasing in 2010 when a moderate water deficit occurred. By contrast, the bacterial richness decreased in 2010 while evenness and diversity were similar in both years. No significant difference was observed in any indices for either sampling time or plant line. Although the composition of the microbial communities (defined as T-RF profiles) changed according to year and sampling time, differences were not significant between the transgenic and control plants. Conclusions: The results in this study suggest that the insertion of ABF3 into potato has no detectable (by current T-RFLP technique) effects on rhizosphere communities, and that any possible influences, if any, can be masked by seasonal or yearly variations.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.11a
• /
• pp.99-106
• /
• 2001

The design for cold extrusion dies is very important, because the die insert is subjected to very high radial and hoop stresses. The design of cold extrusion dies has many constrained conditions. In this paper, the used assumptions are such that the yield strength of each ring is selected according to the allowable tensile or compressive hoop stress in each ring and the maximum allowable inner pressure, when yielding occurs in one ring of the dies, is obtained by the proposed equation. In order to obtain design variables, such as diameter ratios and interferences, using the maximum inner pressure, the flexible tolerance method was used for shrink-fitted thick-walled cylinders. ANSYS APDL was used to perform the repeated analysis of deformation of the dies due to the variation of the design variables. The response surface methodology is utilized to analyze the relationship between the design variables and the maximum radial displacement of the die insert during extrusion. From the results, it is found that outer diameter of the die Insert has the largest effect on the minimization of maximum radial displacement at the inner surface of the dies.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.6
• /
• pp.1743-1752
• /
• 1996

In this paper, a precision inspection technique using CAD/CAI integration is proposed for the parts having very thin and sharp 3 dimensional curve features. The technique begings with feature reconstruction of turbine blades which have 3 dimensional combined feometry, such as splines, and thin circles. The alifnment procedures consistsb of two phases-rough and fine phases : rough phase alignment is based on the conventional 6 point5s probing on the clear cut surfacef, and fine phase alignment is based on the intial measurement on the 3 dimensional curved parts using an lterative measurement feed-back least sequares technique for alignment. Forf the analysis of profile tolerance of parts, the actual measured points are obtained by finding the closet points on the CAD geometry by the developed subdivision technique and the Tschebycheff norm is applied based on iterative fashion, giving accurate profile tolerance value. The developed inspection technique is applied to practical procedures of blade manufacturing and demonstrated high performance.

• BMB Reports
• /
• v.41 no.3
• /
• pp.204-209
• /
• 2008

The cDNAs encoding glutathione peroxidase (GPx) were cloned and sequenced from the liver of three Chinese carps with different tolerance to hepatotoxic microcystins, phyto-planktivorous silver carp (Hypophthalmichthys molitrix) and bighead carp (Aristichthys nobilis), and herbivorous grass carp (Ctenopharyngodon idellus). Using genome walker method, a 750 bp 5'-flanking region of the silver carp GPx gene was obtained, and several potential regulatory elements were identified in the promoter region of the GPx gene. The silver carp GPx gene was widely expressed in all tissues examined. Despite phylogenetic analysis, assigning this newly described carp GPx to the group of mammalian GPx2, the carp GPx seems more similar to GPx1 from a physiological point of view. The constitutive expression pattern of the three carp liver GPx gene, shows a positive relationship with their tolerance to microcystins.

• Korean Journal of Human Ecology
• /
• v.23 no.1
• /
• pp.47-61
• /
• 2014

The purpose of this study was to identify the relationship among financial debt burden, psychological factors and financial stress. Data was collected by surveying 450 individuals who were over twenty years old, and 384 were used for the analysis. As the result, first, number of sources of debt, use of each debt, marital status/double income, housing, debt amount and financial stress were found to be significantly different among three groups(debt free, non risky, risky). In addition, marital status/double income, gender, housing and income were found to significantly influence to the probability of being one of the three groups. Second, level of debt burden, age, employment and income were found to significantly influence to financial stress, while psychological factors such as risk tolerance and self-control were not. It might be noteworthy that people in debt were likely to have higher level of stress, while the older, employed, and having higher income were likely to have lower level of stress. This study would provide useful information in terms of debt policy to relieve the financial stress.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.852-858
• /
• 2007

This paper investigates the dynamic characteristics of a tilted HDD spindle system with fluid dynamic bearings (FDBs). Tilting motion of a HDD spindle system may be caused by improper manufacturing tolerance, such as imperfect cylindricity between shaft and sleeve of FDBs, imperfect perpendicularity between shaft and thrust as well as the gyroscopic moment of the unbalanced mass of the rotating part. Tilting motion may result in the instability of the HDD spindle system and it may increase the disk run-out to limit memory capacity. This research proposes a modified Reynolds equation for the coupled journal and thrust FDBs to include the variable film thickness due to the cylindricity and the perpendicularity. Finite element method is used to solve the Reynolds equation for the pressure distribution. Reaction forces and friction torque are obtained by integrating the pressure and shear stress, respectively. The dynamic behavior is determined by solving the equations of a motion of a HDD spindle system in six degrees of freedom with the Runge-Kutta method to study whirling and tilting motions. This research shows that the cylindricity and the perpendicularity increase the tilting angle and whirl radius of the rotor.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.10
• /
• pp.1660-1669
• /
• 2015

The present study describes the gene cloning, overexpression and characterization of a novel nitrilase from hyperthermophilic bacterium Thermotoga maritima MSB8. The nitrilase gene consisted of 804 base pairs, encoding a protein of 268 amino acid residues with a molecular mass of 30.07 kDa after SDS-PAGE analysis. The optimal temperature and pH of the purified enzyme were 45℃ and 7.5, respectively. The enzyme demonstrated good temperature tolerance, with 40% residual activity after 60 min of heat treatment at 75℃. The kinetic constants V_max and K_m of this nitrilase toward 3-cyanopyridine were 3.12 μmol/min/mg and 7.63 mM, respectively. Furthermore, this novel nitrilase exhibited a broad spectrum toward the hydrolysis of the aliphatic nitriles among the tested substrates, and particularly was specific to aliphatic dinitriles like succinonitrile, which was distinguished from most nitrilases ever reported. The catalytic efficiency k_cat/K_m was 0.44 /mM/s toward succinonitrile. This distinct characteristic might enable this nitrilase to be a potential candidate for industrial applications for biosynthesis of carboxylic acid.

• Journal of Astronomy and Space Sciences
• /
• v.17 no.1
• /
• pp.67-76
• /
• 2000

Far-ultraviolet IMaging Spectrograph(FIMS) is the main payload of the first Korean scientific satellite, KAISTSTA-4, which will be launched in 2002. The optical system of FIMS consists of parabolic cylinder mirror, slit, ellipsoidal reflection grating, and MCP to get spatial information as well as spectral information. Allowed ranges of manufacturing and positioning error are derived for each optical components to achieve the astronomical goals. In the procedure, graphical simplification is dedicated to understand sensitivity table and to derive range and precision of manipulation for each optical component. The result shows that precision of ${\mu}m$ for linear and of 2' for angular manipulation fulfills optical requirements.

• Journal of Welding and Joining
• /
• v.22 no.6
• /
• pp.19-24
• /
• 2004

The laser welding and its analysis of thin-sheet carbon steels were carried out with high power $CO_{2}$ laser. The main factor of weld quality of laser welding is gap and edge quality. This work was preformed to focus on the gap tolerance problem during laser welding. First, bead on plate welding of thin sheet was examined to investigate the effect of laser welding variables, and to obtain optimum welding condition. Butt welding was also carried out to show the effect of gap on the laser weldability of thin sheet. In order to investigate the effect of gap on formability of welded thin sheet, LDH test was caried out. At high welding speed, the partial penetration was obtained by low heat input. Otherwise, porosity was formed in the bead at low weld speed because of too much heat input. The optimum welding condition of welding was derived from bead width, penetration and hardness property. The maximum gap tolerance on laser welding was observed to be about 0.2mm. This gap size has good relationship with beam size of laser spot(about 0.3mm). The formability of welded sheet was about $80{\%}$ value of base metal and the gap size has not affected on the formability, although weld quality is dependent on the gap size.