• Journal of Environmental Impact Assessment
• /
• v.22 no.5
• /
• pp.427-437
• /
• 2013

Generation rate of construction wastes in Korea has occupied preponderantly in recent years. To understand chemical properties of recycled concrete aggregate (RCA), RCA samples were tested for their leaching characteristics. Leaching tests were conducted according to Korean Standard Leaching Test (KLT) and Toxicity Characteristics Leaching Procedure (TCLP) respectively. The RCA samples were characterized using X-ray fluorescence (XRF). Alkalinity of the leachate was determined using a pH meter titration method. The XRF analysis result shows that the calcium oxide (CaO) content in the RCA sample is 25.3~50.4 %. When the RCA sample was mixed with water in a batch reactor, pH in the solution was rapidly increased, and 70% of the total pH change was found in 1 hour. The TCLP showed slightly higher efficiency for leaching heavy metals than the KLT. The leaching efficiency was also higher as the particle size of RCA sample was smaller. The leaching test results suggest that RCA can be generally classified as nonhazardous waste.

• The Journal of Korean Society of Virology
• /
• v.29 no.1
• /
• pp.33-38
• /
• 1999

Retroviral vector provide a highly efficient method for gene transfer into eukaryotic cells. This vector system can be divided into two components; the retroviral vector itself and the retroviral packaging cell line. The key improvement in the design of these two components are, focused on two aspects; the reduction of helper virus production and high titer-virus. We used PA317 for retrovirus packaging cell line, for its high producibility of viral titer. To test the ability of the vectors to generate high titer-virus, we have chosen four different retroviral vectors; LN, LNSX, LNCX and LXSN. To test easily the viral titer, we have made recombinant construction with CD4 and CD8, checked their viral titer and stained their surface expression. LXSN which contain SV40 early promoter in front of neo gene showed best results in viral transient transfection assay, dot blot assay and surface expression. In addition, recombinant containing CD8 generally showed much higher viral titration and surface expression than CD4.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.3
• /
• pp.88-97
• /
• 2011

We carried out cationization of Dak pulp (paper mulberry bast fiber pulp) which is raw material of Hanji (Traditional Korean Paper) using a (3-chloro-2-hydroxypropyl) trimethyl ammonium chloride to improve dyeability during a dyeing of Hanji with Gardenia (Gardenia jasminoides) and smoke tree (Cotinus coggygria). Fiber specific charge densities were determined using polyelectrolyte titration method and K/S values of dyed Hanji was calculated by Kubelka-Munk equation. As the result, fiber specific charge density increased with degree of cationization. Colors of Hanji dyed with Gardenia did not vary significantly with degree of cationization, but cationized Hanji dyed with smoke tree showed a large increase of a* value and reddish yellow color. After-mordanting did not decrease K/S value of dyes with cationized Hanji. K/S values of dyed Hanji decreased with increasing dyeing temperature. For smoke tree, the cationization impair lightfastness of dyed Hanji without mordant. After-mordanting with copper acetate or iron chloride improved lightfastness of dyed Hanji.

• Analytical Science and Technology
• /
• v.18 no.4
• /
• pp.355-361
• /
• 2005

The objective of this paper is to compare the surface features of two kinds of activated caron fiber (ACF) treated with potassium and the variation of their properties by phosphoric acid pre-treatment. X-ray diffraction (XRD) patterns indicate that activated carbon fiber containing potassium species show better performance for metal and metal salts by pre-treatment with phosphoric acid. In order to present the causes of the differences in surface properties and specific surface area after the samples were treated with phosphoric acid, pore structure and surface morphology were investigated by adsorption analysis and SEM. For the chemical composition microanalysis for potassium leading of the activated carbon fibers pre-treated with phosphoric acid, samples were analyzed by EDX. Finally, the type and quality of oxygen groups were determined from the method proposed by Boehm.

• Journal of the Korean Chemical Society
• /
• v.10 no.3
• /
• pp.114-118
• /
• 1966

The glass electrode was empirically calibrated in dioxane-and ethanol-water mixed solvents, by means of which the pH-meter reading could be converted to stoichiometric hydrogen ion concentration. By the potentiometric titration method, the thermodynamic dissociation constants of hydrogen cupferrate (HCup) with variations of ionic concentration in aqueous solution were determined, and by the extrapolation of the constants the new thermodynamic $pK_a$ value, 3.980${\pm}$0.006, at zero ional concentration was obtained. The thermodynamic dissociation constants of HCup in dioxane-and ethanol-water solution were also potentiometrically determined with the changes in composition of organic solvents at 0.01 and 0.05 of the ionic strength(${mu}$) and 25 $^{\circ}C$. The empirical formula of the constants with mole fraction(n) of the organic solvent are as follow: Dioxane-water solution. $pK_a$= 12.96n + 4.10 at ${\mu}$ = 0.01, n = 0.0228∼0.171 $pK_a$= 12.05n + 4.23 at ${\mu}$ = 0.05, n= 0.0228∼0.171 Ethanol-water solution, $pK_a$= 4.0ln + 4.26 at ${\mu}$= 0.01, n= 0.0395∼0.262 $pK_a$= 3.83n + 4.34 at ${\mu}$= 0.05, n= 0.0395∼0.262

• Bulletin of the Korean Chemical Society
• /
• v.31 no.10
• /
• pp.2980-2984
• /
• 2010

A new poly (vinyl chloride) (PVC) membrane electrode that is highly selective to $Mn^{+2}$ ions was prepared using N,N'-bis(2'-pyridinecarboxamide)-1,2-ethane ($bpenH_2$) as a suitable neutral carrier. This concentration range ($1.0{\times}10^{-5}$ to $1.0{\times}10^{-1}\;M$) with Nernstian slope of $29.3{\pm}0.5\;mV$ per decade. The detection limit and the response time of electrode were $8.0{\times}10^{-6}\;M$ and (${\leq}15\;s$) respectively. The membrane can be used for more than two months without observing any divergence. The electrodes exhibited excellent selectivity for $Mn^{+2}$ ion over other mono-, di- and trivalent cations. Selectivity coefficients were determined by the matched potential method (MPM). The electrode can be used in the pH range from 4.0 - 9.0. The isothermal coefficient of this electrode amounted to 0.00023 V/$^{\circ}C$. The stability constant (log $K_s$) of the $Mn^{+2}$ - $bpenH_2$ complex was determined at $25^{\circ}C$ by potentiometric titration in mixed aqueous solution. The proposed electrode was applied to the determination of $Mn^{+2}$ ions in real samples.

• Journal of the Korean Ceramic Society
• /
• v.44 no.11
• /
• pp.607-612
• /
• 2007

Zn-AC and Zn-H-AC series prepared from non- and surface-modified activated carbon were investigated in terms of their hydrogen production capacity. An increase in the concentration of the zinc salts used with these series was shown to lead to a decrease in the values of the surface textural properties. The existence of zinc complexes on the surface was confirmed from an analysis of XRD data. The SEM micrographs of the two different sample types showed that the transformation of the carbon surface with an acid pre-treatment significantly change the metal contents on the surfaces of the carbon matrix. The EDX spectra indicated that all of the samples were richer in the amount of oxygen and zinc compared to any other elements. The results obtained using the Boehm's titration method showed that the positive introduction of the acidic groups on the carbon surfaces with the acid treatment is correlated with an increase in the amounts of zinc complexes with variation of the acidic groups. In terms of the hydrogen production performance, the volume fractions of the Zn-H-AC series were found to produce higher amounts than the Zn-AC series as a function of the metal contents considering the effects of the acid treatment.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.12
• /
• pp.1178-1183
• /
• 2006

This paper is concerned with the modeling and identification of pH neutralization process as nonlinear chemical system. The pH control has been applied to various chemical processes such as wastewater treatment, chemical, and biochemical industries. But the control of the pH is very difficult due to its highly nonlinear nature which is the titration curve with the steepest slope at the neutralization point. We apply SVM which have become an increasingly popular tool for machine teaming tasks such as classification, regression or detection to model pH process which has strong nonlinearities. Linear and radial basis function kernels are employed and each result has been compared. So SVH based on kernel method have been found to work well. Simulations have shown that the SVM based on the kernel substitution including linear and radial basis function kernel provides a promising alternative to model strong nonlinearities of the pH neutralization but also to control the system.

• Journal of the Korean Chemical Society
• /
• v.5 no.1
• /
• pp.60-65
• /
• 1961

Nowadays, it is a well-known fact that the epoxy resins play an important role in the industrial field of plastics because of their excellent properties. Although studies on the polymers of epichlorohydrin with phenols, up-to-date, were various, there were only a few wokrs on the polymers of epichlorohydrin with amines. Therefore the experiments are carried out about the polymerization of epichlorohydrin with ${\alpha}-, {\beta}$-naphtylamine, o-, m-, p-toluidine, and o-, m-, p-nitroaniline. Examining the polymerization processes and the differences in the properties of the polymers, we obtained the following conclusions. 1) ${\alpha}$-naphthylamine, ${\beta}$-naphthylamine, o-toluidine, m-toluidine and p-toluidine react with epichlorohydrin to form polymers but o-, m-, and p-nitroaniline do not make polymers with epichlorohydrin. 2) As polymerization times after adding sodium hydroxide and refluxing again 3hrs. are suitable for ${\alpha}$-naphthylamine-epichlorohydrin, 3.5hrs. for${\beta}$-naphthylamine-epichlorohydrin, and 4hrs, for m-toluidine-epichlorohydrin. 3) Method for determining molecular weight of these polymers by the titration of end group is applicable to the polymers having D.P. less than about 200 for ${\alpha}$-, ${\beta}$-naphthylamine-epichlorohydrin and those having D.P. less than 18 for m-toluidine-epichlorohydrin. 4) Gererally, these polymers get special colors so that these need proper pigmentation to use as molding compounds.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.11
• /
• pp.1635-1640
• /
• 2004

The cyclophanes 1a-d containing two benzo[b]furan rings connected by various bridges have been prepared and their binding behaviors with N-benzylphenethylammonium cation 2 were examined by NMR titration method. The successive alkylation reactions of 4-hydroxyl groups and then 2-hydroxyl groups of 2,4-dihydroxybenzophenonse gave macrocycles 5a-c. Photoirradiation of the macrocycles 5a-c with 350 nm mercury lamp followed by dehydration afforded the cyclophanes 1a-c. Hydrolysis of two ester groups pendant on a bridge of 1b produced the carboxyl group-containing cyclophane 1d. The cyclophane 1a having a p-xylene bridge showed 1 : 1 binding with 2 with the binding constant of $36{\pm}6M^{-1}$ in 3 : 1 $CDCl_3$/methanol-$d_4$ solvent, while 1b and 1c which have neutral flexible bridges exhibited no appreciable binding with 2. The disodium salt of 1d showed much higher binding affinity for 2 forming 1 : 1 and 1 : 2 complexes.