• 한국산학기술학회논문지
• /
• 제18권6호
• /
• pp.431-437
• /
• 2017

본 연구에서는 주행 노면의 형상을 재현하는 알고리즘을 기반으로, 외란 형상 정보를 활용한 차량의 진동제어 시스템과 그 결과를 제시하였다. 시스템에 전달되는 외란으로 유발되는 과도한 진동 및 그 영향을 저감시키고 안정성을 확보하는 것은 중요한 이슈이며, 특히 자동차 분야에서는 그 요구가 지속적으로 제기되고 있다. 차량의 진동과 불안정성을 유발하는 대표적인 외란 요인은 주행하는 차량 타이어에 접촉하는 불규칙한 도로면 형상이다. 따라서 이러한 외란 형상 정보를 확보하는 것은 매우 중요한 과정이다. 본 연구에서는 차체에 부착된 센서로부터 측정된 신호에 혼입된 차량의 동적 거동 영향을 배제하고 관심 도로면의 형상 정보를 재현할 수 있는 RPS 알고리즘과 이를 적용한 실험결과를 제시하였다. 이를 토대로, 예견제어 이론을 응용한 전자 제어 현가 시스템과 7 자유도 전차량 모델에 적용하여 시뮬레이션을 수행하였다. 그 결과 반능동형 작동기와 결합된 지능형 제어 시스템을 통하여 자동차의 주요 성능 지수인 승차감과 조종안정성의 개선 효과를 확인하였으며, 제안한 제어 프레임의 효용성을 제시하였다.

• 한국정밀공학회지
• /
• 제27권2호
• /
• pp.117-122
• /
• 2010

The shock performance of hard disk drives has been a serious issue for Car PC. Since the vibration and disturbances from a car gives an adverse effect on a HDD of Car PC, it is necessary to protect a HDD from them. In this study, passive vibration attenuation system for a vehicle HDD was developed. Acceleration from the ground through the tire and suspension system was measured to figure out the frequency translated to Car PC. Critical frequency to Car PC was determined by exciting it with a shaker and measuring a data transmitting speed from HDD. A newly designed vibration attenuation system was fabricated to protect HDD from the acceleration. It was shown that the developed system had an excellent vibration attenuation ability.

• 한국자동차공학회논문집
• /
• 제10권5호
• /
• pp.168-173
• /
• 2002

The durability test, along with the crashworthiness test, requires the most time and expense in the vehicle development process. The durability design using CAE tools reduces the time required for both the durability test and actual vehicle production. Existing dynamic stress analyses designed fir the analysis of vehicle fatigue mainly calculate the dynamic stress history and fatigue after performing dynamic analysis and stress analysis with relevant software applications and then superpositioning the dynamic load history and stress influence coefficient at each joint. This approach is a complex process, taking into account the flexibility of the parts. It is, however, incapable of giving accurate consideration to the contacts between components, the non-linearity of materials, and tire-road surface interactions. This approach also requires that the analysts have an expertise in software applications of various kinds or an expert in each area must perform the analysis. This requires as a great deal of manpower and time. In order to complement the existing approaches for dynamic stress analysis, this study aims at the following: (1) to suggest the simple and accurate analysis technique which is capable of producing all the possible necessary results; (2) to reduce dramatically the time and manpower needed to construct a model designed to analyze dynamics, quasi-static stress, and fatigue; and (3) to enable an accurate analysis of fatigue by improving the accuracy of dynamic stress. we verify the presented analysis method through durability evaluation of the knuckle of passenger car.

• Structural Engineering and Mechanics
• /
• 제15권1호
• /
• pp.1-19
• /
• 2003

This paper presents the formulation of a new bridge-vehicle system with validation using the field data. Both pitching and twisting modes of the vehicle are considered in the contribution of the dynamic effects in the bridge responses. A heavy vehicle was hired as a control vehicle with known axle weight, axle spacing and spring coefficients. The measured responses were generated from the control vehicle running at a particular speed at a test span at Ma Tau Wai Flyover. The measured responses were acquired using strain gauges installed beneath the girder beams of the test bridge. The simulated responses were generated using BRVEAN that is a self-developed program based on the proposed bridge-vehicle system. The validation shows that the bridge model is valid for representing the test bridge and the governing equations are valid for representing the motion of moving vehicles.

• 한국산학기술학회논문지
• /
• 제18권3호
• /
• pp.306-311
• /
• 2017

본 논문은 자동차 현가장치의 기구적 특성에 대한 설계 최적화에 관한 것이다. 현가장치의 기구적 특성은 토우 및 캠버와 같은 바퀴의 자세를 결정하며 이것은 주행 중 타이어의 마모에 관련될 뿐만 아니라 차량의 운동성능인 조종안정성에 큰 영향을 미친다. 따라서 설계 초기단계에서 현가장치 기구의 특성을 결정하는 것은 매우 중요한 일이다. 본 논문에서는 맥퍼슨 스트러트식 현가장치에 대한 현가장치의 기구적 특성을 파악하기 위하여 변위해석을 수행하였다. 이를 위해 현가장치 기구를 구성하는 조인트에 대한 구속방정식을 세우고 이를 풀 수 있는 프로그램을 작성하였다. 또한 원하고자 하는 현가장치의 기구적 특성을 얻기 위하여 설계 최적화 프로그램인 ADS를 이용하였다. 최적화를 위한 설계변수로서 현가장치의 차체 부착점인 하드 포인트의 좌표로 설정하였으며 목표함수로서 바퀴의 상하운동에 대한 토우-인의 합으로 정의하였다. 구속함수로서 설계 시 제한조건인 최대 캠버각과 최저 롤 중심고를 고려하였다. 본 연구의 결과로서 두 가지 구속함수를 만족하고 토우-인의 변화를 최소로 하는 하드 포인트의 최적위치를 결정할 수 있었다.

• 동력기계공학회지
• /
• 제14권6호
• /
• pp.47-53
• /
• 2010

A stabilizer link connects the stabilizer bar to the lower arm of the suspension. When a vehicle is turning, lateral forces from the tire are transmitted through the stabilizer link into the stabilizer bar. The stabilizer bar will twist, thus adding rigidity to the vehicle body. In this study, the stabilizer link body was manufactured by using composite material with POM-GF25%. Therefore, the strength evaluation of stability link body with composite material carried out from tensile, wear and fatigue test. The tensile strength between the stability link body with composite material and the rod with knurling was the largest of four types of rod. In Analyzing materials property using optical sensing technique of stabilizer link for automobile parts, its has been identified the safety.

• 한국CDE학회논문집
• /
• 제19권4호
• /
• pp.324-331
• /
• 2014

In the design of a combat vehicle, various performances such as firepower, mobility and survivability, etc., should be considered. Furthermore, since these performances relate to each other, design framework which can treat an integrated system should be employed to design the combat vehicle. In this paper, we use empirical interior ballistic and 3D combat vehicle analyses for predicting firepower and mobility performances which are developed in previous study (1) integrated performance modeling. In firepower performance, pitch and roll angle by sequential firing are considered. In mobility performance, vertical acceleration after passing through a bump is regarded. However, since there are many design variables such as mass of vehicle, mass of suspension, spring and damping coefficient of suspension and tire, geometric variables of vehicle, etc., for firepower and mobility performance, we utilize analysis of variance and quality function deployment to reduce the number of design variables. Finally, integrated design optimization is carried out for integrated performance such as firepower and mobility.