• Journal of the korean society of oceanography
• /
• v.34 no.1
• /
• pp.49-57
• /
• 1999

A red tide organism, Amphidinium carterae was incubated under different iron/chelator and nitrate concentrations to investigate the factors controlling the growth. The chelation capacity played a critical role in regulating the nitrate reductase (NR) activity and in vivo fluorescence of this organism. However, there was a significant difference between the NR activity and in vivo fluorescence in response to trace metals and chelator treatments. In vivo fluorescence was the highest in FeEDTA 10 ${\mu}$M treatments and the lowest in DTPA 10 ${\mu}$M treatments. This indicates that the availability of the trace metal is important in regulating the in vivo fluorescence of this photosynthetic microalgae In contrast, NR activity showed the highest values in trace metal enriched treatments, and trace metal + DTPA treatments showed fairly high NR activities. This suggests that DTPA treatment did not hinder the NR activity as much as it did in vivo fluorescence. In vivo fluorescence and NR activity increased with nitrate concentration of up to 50 ${\mu}$M and remained relatively constant or the rate of increase decreased above that concentration, indicating that initial nitrate concentration of higher than a certain level would not accelerate the growth of A. carterae. Further investigation is needed to elucidate the reason for the difference in timing sequence between the NR and in vivo fluorescence in response to different metal treatments and chelation capacity.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.8
• /
• pp.1100-1106
• /
• 2009

Recently, there are quite a lot of attention is drown on the researches related to of Miller method applied high expansion cycle. For this study, high expansion cycles are formed and analyzed with the base view point of thermodynamics, and the features of each factors are also investigated. As a result of analysis, the expansion-compression ratio is expected with a decrease of effective compression ratio as intake valve closing time retarded, however, the decrease of mean effective pressure and its output is accompanied with the counterflow of intake air. Accordingly, as the consequence of such failure, it is expected that an alternative is needed for the realization of high expansion cycles, and the improvement over thermal efficiency. To materialize such cycle, the control system to delay the closing time of intake valve was designed and VVT, the 3 S/B low speed diesel engine, is applied to evaluate the efficiency. The result of the trial shows that there was no significant errors.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.41 no.2
• /
• pp.180-186
• /
• 2014

One or two mesiodens are mostly common to the clinician. However, three mesiodens is rarely found and can cause complications such as orthodontic problems or interruptions of the adjacent teeth with more than 1 or 2 mesiodens. Many factors cause irregularities in the permanent dentition. Mesiodens, especially in the anterior maxilla, can disturb the eruption of adjacent permanent teeth and cause diastemas, ectopic eruptions, root resorption, or the formation of dentigerous cysts. The early diagnosis of mesiodens is important for preventing such complications, and the timing of intervention should be based on their location and number. Periodic checkups and improved diagnostic devices make it easy to find mesiodens and associated complications. In this case, 3 supernumerary teeth in the maxillary anterior region were affecting the eruption of the adjacent permanent incisors. To minimize complications and preserve the deciduous teeth, the three supernumerary teeth were extracted in 2 steps. Since cone-beam computed tomography was not available, a brace wire was used to measure the depth of the mesiodens.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.20 no.2
• /
• pp.102-110
• /
• 2010

Personal exposure relies on characteristics of time activity patterns of the population of concern as human activities impact the timing, location, and level of personal exposure. The information about time spent in microenvironments plays a critical role for personal exposure to air pollutants. It is useful to determine the precise times of the day that the subjects are in certain locations or engaging in specific activities because exposure to some air pollutants can depend on temporal trends. This study investigated time activity pattern for workers of Korean population over 19 years old with 8,778 workers in weekday. The residential indoor times were 12 hours. Time activity was different by gender and the mean times stayed at home in weekday were 12.9 hours in female and 11.42 hours in male, respectively. The major factors on residential indoor time and workplace time were age, monthly income, occupation and industry type, work position, education, and gender. Considering shorter than those in other countries, Korean workers spent less time at home after the working hours. Determinants of time activity pattern need to be taken into account in exposure assessment, epidemiological analyses, exposure simulations, as well as in the development of preventive strategies. Since there are substantial difference of Korean worker activity pattern, this information can be critical for exposure assessment in Korea.

• Journal of Applied Tourism Food and Beverage Management and Research
• /
• v.13 no.1
• /
• pp.29-41
• /
• 2002

Controlling food materials, is getting more significant in hotel management nowadays as the selling of food beverage continue to rise. F&B managers have been required to have new management of the food materials by a fierce competition, an increase in cost, the shortened span of product life and customer's demand that is becoming more various and sophisticated since Korea was placed under the influence of IMF. I'm going to analyze the factors that cause waste and loss through a series of the process to purchase inspect, store food materials, make a product with that materials and sell the product in order to make more profits by making the circulation of the food materials easier and more efficiently. I studied how 3 chain hotels of A group purchase, store the food materials and control stock. I made up questionnaires about the circulation and control of food materials to 107 cooks in order to know what the cooks who are working at the hotel regard as a real problem and a practical solution. This research indicates that purchasing, producing and selling departments don't establish the mutual connection, a professional purchasing manager is strongly needed and there is difficulty in predicting the proper timing to supply. Also the research shows that A hotel group controls the food materials by analyzing the amount of consumption, stock, setting up the period of validity and uses slowly moving food materials in stock mainly by introducing the menu that aims at four seasons. As a result, the research suggests that we should introduce the concept of food producing factory, as it were, Central Kitchen that is based on the network among various kitchens to improve the flow of the food materials.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.29 no.4
• /
• pp.333-339
• /
• 2007

Adequate bone quantity is one of the important factor to obtain osseointegration after implantation. Guided bone regeneration (GBR) has widely used in implantation for reconstruction of bony defects. Since introducing this procedure, there are many studies about survival rate of implants, changing in surrounding bone volume after function. The purpose of this study was to evaluate the amount of resorption according to placement timing and survival rate after function. The subjects were patients who had been operated with GBR from Jun 2003 to Jun 2004 in Seoul National University Bundang Hospital. They were divided into simultaneous and delayed placement group. The follow up had been performed at the time of just after GBR, 1, 3, 6, 12, 24-month later and standard periapical radiographs were taken to estimate the bone level at the time. The total average of bone level change in radiographs was 1.94mm(${\pm}0.25$), and 1.92mm(${\pm}0.72$) in simultaneous installation, 2.03mm(${\pm}0.25$) in delayed installation. In this report, the survival rates were 92.2% in simulataneous group and 92.3% in delayed group. Insufficient primary stability, early contamination of wound, overloading, poor oral hygiene, and infection were thought to be associated factors in the failed cases.

• Journal of Embryo Transfer
• /
• v.28 no.2
• /
• pp.87-93
• /
• 2013

The efficiency of artificial insemination (AI) for horses remains unsatisfactory. It is mainly because each process of AI causes a detrimental effect on semen quality. To sustain quality of semen properly, several factors including libido of stallions and sperm damage during sperm processing and preservation should be considered. Stallions with decent libido produce a high ratio of sperm to seminal plasma in their ejaculates, which is the ideal semen composition for maintaining sperm quality. Thus, to maximize the fertility rate upon AI, stallions should be appropriately managed to enhance their libido. Seminal plasma should have a positive effect on horse fertility in the case of natural breeding, whereas the effects of seminal plasma on both sperm viability and quality in the context of AI remain controversial. Centrifugation of semen is performed during semen processing to remove seminal plasma and to isolate fine quality sperm from semen. However, the centrifugation process can also result in sperm loss and damage. To solve this problem, several different centrifugation techniques such as Cushion Fluid along with dual and single Androcoll-E$^{TM}$ were developed to minimize loss of sperm and to damage at the bottom of the pellet. Most recently, a new technique without centrifugation was developed with the purpose of separating sperm from semen. AI techniques have been advanced to deliver sperm to optimal region of female reproductive tract at perfect timing. Recombinant equine luteinizing hormone (reLH) and low dose insemination techniques have been developed to maximize both fertility rate and the efficiency of AI. Horse breeders should consider that the entire AI procedure should be optimized for each stallion due to variation in individual horses for a uniformed AI protocol.

• Journal of Animal Reproduction and Biotechnology
• /
• v.35 no.2
• /
• pp.171-176
• /
• 2020

Advancing the estrous cycle of mares is an essential breeding strategy that is routinely conducted by Thoroughbred breeders to improve economic outcomes. For this purpose, Equilume light masks have been developed as an alternative to existing technologies such as artificial lighting or hormonal treatments because they are considered as valid as existing methods with additional animal welfare advantages. For example, with the Equilume light masks, horses can be let out into the pasture, whereas they have to be kept indoors during lighting treatment. Because the function of Equilume light mask on the estrous cycle of mares is influenced by environmental factors such as nutrition condition and temperature, Equilume light mask should be studied in various environments. The objective of the present study was thus to verify the effect of Equilume light masks on the onset of the estrous cycle in Thoroughbred mares in South Korea. Mares were randomly selected and separated into two groups at two Thoroughbred horse breeding farms. The mares in the treatment group were equipped with Equilume light masks from November 18 to February 10 the following year. The body condition, the number and size (> 35 mm) of uterine follicles, and the uterine horn score of the mares were assessed on January 6 and February 10. The body condition scores were not different between the two groups. The treatment with the Equilume light mask had no positive effects on developing follicles and the reproductive tract. In conclusion, the use of Equilume light masks did not influence the seasonal resumption of the estrus cycles in Thoroughbred mares in South Korea.

• Journal of Korean Neurosurgical Society
• /
• v.42 no.2
• /
• pp.89-91
• /
• 2007

Objective : Cranioplasty is necessary to repair the cranial defect, produced either by decompressive craniectomy or removal of the contaminated depressed skull fracture. Complications are relatively common after cranioplasty, being reported up to 23.6%. We examined the incidence and risk factors of infectious complications after cranioplasty during last 6 year period. Methods : From January 2000 to December 2005, 107 cranioplasties were performed in our institution. The infectious complications occurred in 17 cases that required the removal of the bone flap. We examined the age of the patients, causes of the skull defect, timing of the cranioplasty the size of the defect, and kinds of the cranioplasty material. The size of the skull defect was calculated by a formula, $3.14{\times}long\;axis\;{\times}short$ axis. The cranioplasty material was autogenous bone kept in a freezer in 74 patients, and polymethylmetacrylate in 33 patients. Statistical significance was tested using the chi-square test. Results : The infection occurred in 17 patients in 107 cranioplasties (15.9%). It occurred in 2 of 29 cases of less than $75\;cm^2$ defect (6.9%), and 6 in 54 cases of $75{\sim}125\;cm^2$ defect (11.1%). Also, it occurred in 9 of 24 cases of more than $125\;cm^2$ defect (37.5%). This difference was statistically significant (p <0.01). Conclusion : During the cranioplasty, special attention is required when the skull defect is large since the infection tends to occurr more commonly.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.8
• /
• pp.930-938
• /
• 1999

미래의 통합 이동 통신망은 멀티미디어 데이터 서비스를 하기 위해 작은 셀로 망이 구성될 것이다. 셀이 작은 경우, 이동 호스트의 셀간 이동이 상대적으로 증가해서 잦은 핸드오프 처리로 서비스 중단이 빈번히 발생할 수 있을 뿐만 아니라 자원의 낭비도 많아지게 된다. 따라서 이런 문제를 해결하기 위해 이동 호스트의 이동성을 예측해서 멀티캐스트 연결을 구성해서 사전 핸드오프 처리를 하는 SGMH방법을 제안한다. SGMH방법의 성능 평가를 위해 핸드오프 처리과정의 데이터 및 제어 정보의 흐름을 분석하고, 망 종속 인자들을 도입해서 버퍼 오버헤드와 서비스 중단 시간 면에서 기존 핸드오프 방법들과 비교했다. 비교 분석한 결과는 제안한 방법이 기존의 방법보다 기지국에서의 버퍼 오버헤드뿐만 아니라 서비스 중단 시간을 줄일 수 있음을 보였다.Abstract For mobile multimedia data services, future mobile communication networks will consist of small cells. In case of smaller cell size, the number of user movements between cells will increase and more network resources will be consumed for processing frequent handoffs. This processing delay will cause frequent connection service disruptions. To solve these problems, a multicast-based handoff method ,called SGMH(Sub-Group Multicast-based Handoff), is suggested. SGMH method estimates future movements of mobile hosts and setups a dynamic multicast connection tree for procesing handoffs. For performance evaluation, we represent flows of data and control messages as timing diagrams and introduce several network related factors. In terms of buffer overhead and service disruption time we compared the SGMH method to other methods. The results show that SGMH method has better performance in that it can reduce consumption of network resources and minimize service disruption time.