• Proceedings of the KIPE Conference
• /
• 2001.12a
• /
• pp.83-88
• /
• 2001

This paper deals with the economical equipment control which is used by internet network system at the industrial workplace. If the control devices can be accessed by internet, we can have the developed possibility of work conditions. In this paper, we presented the advanced digital timer which has a communication function to control and observe panel to realize control solution based on internet to be easily applicable at workplace with low cost. and we used 485 serial communication module to have parallel expansibility and safety. And, this system was experimented and designed for easy system management and status check from remote station through internet As the result of experiment, the circuit configuration would be more simplified than the existing, and it is expected that multi connection control and monitoring can be simply implemented with low cost equipment at industrial workplace.

• Journal of Korea Society of Industrial Information Systems
• /
• v.23 no.3
• /
• pp.1-11
• /
• 2018

This paper explores the reliability issue especially associated with the time-division synchronous communication when a networking stack is implemented using software timers provided by embedded operating systems. Especially, we explore the reliability of beacon synchronization of IEEE 802.15.4. Our experiments based on its practical implementation clearly show that processing delays or losses of hardware timer interrupts used for software timers lead to occasional failures in beacon synchronization. To avoid such failures, we suggest a reception time compensation scheme that turns on the receiver earlier than expected.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12B
• /
• pp.2275-2282
• /
• 1999

In ATM networks, bandwidth allocation using available bandwidth is important to control ABR traffic efficiently. However, it is difficult to dynamically assign bandwidth on bursty traffic, because the tracking of the existing available bandwidth information uses statistical value. In this paper, we propose a output-bufferd ATM switch using Per-VC queueing scheme with timer and Controller. The controller determines whether each VC is in congestion state or not, and the timer can assign dynamically as determining the available bandwidth for the Present period by Backlogged time and total link capacity, and then transmitting the determined bandwidth to source. Instead of using statistical parameters, the proposed scheme can improve link efficiency as allocating the bandwidth of the next period, by use of measured bandwidth during the current period.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.10 s.181
• /
• pp.2581-2588
• /
• 2000

In previous studies, the dynamic resistance, which was calculated by the process variables measured at the electrode of the welding machine, and the electrode displacement were used for quality exa mination. However, in-process usage of such systems is not effective in systems that include a welding gun attached to a robot. In order to overcome such problems, we obtained and used the process variables from the welding machine timer. This would allow us to estimate real time in -process weld quality. For quality estimation, the features were extracted as factors from the primary dynamic resistance patterns, which were measured in t he welding machine timer. The relationship between the indexes and nugget size of the welds was observed through the regression analysis. Using the analyzed factors, a regression model that could estimate nugget diameter was developed. Two regression equations of the model were suggested depending on the factors, and it was showed that the model developed by stepwise method was effective one for weld quality estimation. The developed estimation model was in good linearity with the nugget diameter obtained through the experimentation.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.8 no.4 s.23
• /
• pp.58-67
• /
• 2005

To overcome limitations of test scope, schedule and cost, M&S(Modeling & Simulation) technique has been applied for T&E(Test and Evaluation) of the state-of-art weapon systems. This paper proposes an air defense simulation software framework to reduce both redundancy an[1 programming errors in system simulator. The proposed framework consists of a 'model' and a 'middleware' The 'middleware' is a reliable communication service layer that supports not only HLA(High Level Architecture) which is an international standard in M&S but also TCP/IP, UDP and etc. The main role of 'model' is to schedule and to run the real-time distributed simulation. The proposed framework has been applied to M-SAM(Middle range Surface to Air Missile) system simulator. The proposed framework's scheduling and communication performance results are satisfactory and were measured by hardwired NTP(Network Timer Protocol) time-stamp with GPS(Global Positioning System) timer for better precision.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.11a
• /
• pp.1375-1378
• /
• 2005

향후 국내에서 개발되는 저궤도 관측위성의 고성능 탑재컴퓨터로 유럽에서 자체적으로 개발하여 위성용으로 활용하고 있는 MCM-ERC32 를 사용할 예정이다. MCM-ERC32 는 크게 32-비트 ERC32SC 프로세서와 프로세서의 기능을 보완하고 추가적인 기능들을 제공하기 위해 제작된 ASIC인 VASI(Very Advanced Sparc Interface), 그리고 메모리(SRAM, DRAM, EEPROM, etc.)로 구성되어 있다. 위성의 탑재소프트웨어를 설계 및 개발하는데 있어서 가장 기본적으로 요구되는 기능이 타이머이다. 탑재소프트웨어는 타이머를 통하여 태스크들의 관리와 스케쥴링 등을 수행하게 된다. 위성과 같이 높은 정확도가 요구되는 실시간 임베디드 시스템에서는 타이머의 구현이 매우 중요하다. ERC32SC 프로세서 자체에서도 RTC, GPT(General Purpose Timer), WDT(Watchdog Timer)와 같은 기본적인 타이머 기능을 제공하지만 VASI 에서도 클락과 사이클이라는 개념을 이용한 RTC 를 제공한다. 어느 타이머를 사용하는가는 전적으로 개발자의 선택이다. ERC32SC 프로세서에서 제공하는 타이머는 상용의 임베디드 시스템에서 제공하는 기능과 동일하다. 본 논문에서는 위성탑재소프트웨어 개발에 필요한 RTC 를 설계하기 위한 MCM-ERC32 에서 제공하는 VASI RTC 의 구조와 기능에 대하여 소개하고자 한다.

• Journal of the Korean Wood Science and Technology
• /
• v.26 no.1
• /
• pp.87-96
• /
• 1998

The bending performances were evaluated at the radiata pine plywood through veneer compositions encompassing veneer quality, ply-numbers and overlays of the high density- or medium density-phenol resin impregnated sheets (hereafter abbreviated as resin sheets) on the raw plywood. In addition, a prediction on the bending MOE of veneers and plywoods was carried out by the nondestructive testing with stresswave timer. The summarized results were as follows: I. Bending strength and bending MOE of resin sheets-overlaid plywoods in parallel surface grain direction through 5 and 7ply were increased by 13 to 45% and 17 to 34%, respectively. Resin sheets-overlay occurred an increasing effect of the strength efficiency i.e. strength perpendicular-to-grain direction versus that parallel-to-grain direction, showing the phenomenon that the plywood strength becomes greater at the perpendicular-to-grain direction of 7ply than at that of 5ply. Displacement at bending failure had a greater trend at 7ply than at 5ply, and was decreased by resin sheets-overlay. 2. After the nondestructive bending MOEs were measured for individual veneers, these veneers were rearranged in plywood-manufacture. In these plywoods, including resin sheets-overlay, the actual MOE was predictable with feasibility of $R^2$=0.53, and also the nondestructively-evaluated MOE was lower by 20% in raw plywood, and higher 20% in LVL than actual bending MOEs.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.511-514
• /
• 2002

In may automated systems such as manufacturing systems and process plants, an industrial network or fieldbus is a very important component for the exchange of various and sometimes crucial information. Some of the information has a tendency to rapidly lose its value as time elapses after its creation. Such information or data is called real-time data that includes sensor values and control commands. In order to deliver these data in time, the fieldbus network should be tailored to have short delay with respect to the individual time limit of various data. Fine-tuning the network for a given traffic requires the knowledge on the relationship between the protocol parameters such as timer values and the performance measure such as network delay. This paper presents a mathematical performance model to calculate communication delays of the Profibus FMS network when the timer value TTR and the traffic characteristics are given. The results of this model is compared to those from experiments to assess the model's validity.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.1042-1046
• /
• 2008

Both the weighing bridge and the diverter system is a important component in achieving a high accuracy liquid flow rate standard using a static gravimetric method. The weighing bridge is a tank which weighing collected flow with a load cells. The diverter is a moving device used to direct flow alternately along its normal course(by pass) or towards the weighing tank. The time needed for collection into the weighing tank is measured using a timer. So it is important to the diversion period is sufficiently fast and triggering point of timer which is determined the filling time. On this studies show that the measurement deviation of load cell and uncertainty of diverter system for changing diversion speed and triggering point was estimated in accordance with Guide to The Expression of Uncertainty in Measurement(ISO).

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.7
• /
• pp.602-610
• /
• 2000

In communication networks used in safety-critical systems such as control systems in nuclear power plants there exist three types of data traffic : urgent or asynchronous hard real-time data hard real-time periodic data and soft real-time periodic data. it is necessary to allocate a suitable bandwidth to each data traffic in order to meet their real-time constraints. This paper proposes a method to meet the real-time constraints for the three types of data traffic simultaneously under a timer-controlled token bus protocol or the IEEE 802.4 token bus protocol and verifies the validity of the presented method by an example. This paper derives the proper region of the high priority token hold time and the target token rotation time for each station within which the real-time constraints for the three types of data traffic are met, Since the scheduling of the data traffic may reduce the possibility of the abrupt increase of the network load this paper proposes a brief heuristic method to make a scheduling table to satisfy their real-time constraints.