• Spatial Information Research
• /
• v.19 no.1
• /
• pp.29-40
• /
• 2011

GOCI the world first Ocean Color Imager in Geostationary Orbit, which could obtain total 8 images of the same region a day, however, its spatial resolution(500m) is not enough to use for the accurate land application, Super Resolution(SR), reconstructing the high resolution(HR) image from multiple low resolution(LR) images introduced by computer vision field. could be applied to the time-series remotely sensed images such as GOCI data, and the higher resolution image could be reconstructed from multiple images by the SR, and also the cloud masked area of images could be recovered. As the precedent study for developing the efficient SR method for GOCI images, on this research, it reproduced the simulated data under the acquisition process of the remote sensed data, and then the simulated images arc applied to the proposed algorithm. From the proposed algorithm result of the simulated data, it turned out that low resolution(LR) images could be registered in sub-pixel accuracy, and the reconstructed HR image including RMSE, PSNR, SSIM Index value compared with original HR image were 0.5763, 52.9183 db, 0.9486, could be obtained.

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.317-320
• /
• 2003

In this paper, we present real-time, accurate face region detection and tracking technique for an intelligent surveillance system. It is very important to obtain the high-resolution images, which enables accurate identification of an object-of-interest. Conventional surveillance or security systems, however, usually provide poor image quality because they use one or more fixed cameras and keep recording scenes without any clue. We implemented a real-time surveillance system that tracks a moving person using pan-tilt-zoom (PTZ) cameras. While tracking, the region-of-interest (ROI) can be obtained by using a low-pass filter and background subtraction. Color information in the ROI is updated to extract features for optimal tracking and zooming. The experiment with real human faces showed highly acceptable results in the sense of both accuracy and computational efficiency.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.51-51
• /
• 2000

The ambiguity resolution is an essential task for the precise carrier phase differential GPS. In practice, however, there are still many problems in resolving the ambiguity in kinematic mode, especially in the urban areas. The multipath in received signal, the frequent change in visible satellites, and the cyclic slips make the ambiguity resolution very difficult task in real-time operation. In this paper, we consider a differential positioning with the float ambiguity that is free from the integer constraint. The float ambiguity estimation if carried out by the Kalman filter. The float and fixed ambiguities are combined together to determine the position in real-time kinematic mode.

• Transactions of the Society of Information Storage Systems
• /
• v.1 no.2
• /
• pp.132-136
• /
• 2005

It is widely accepted that the reading mechanism of Super-RENS(super-resolution near field structure) and Super-ROM(super-resolution read only memory) is closely related with non-linear temperature dependent material properties such as refractive indices, phase change. Furthermore, the dynamic change of the temperature distribution also an essential part of reading mechanism of Super-RENS/ROM. Therefore, the knowledge of the temperature distribution as a function a time is one of the important keys to reveal the physics of reading mechanism in Super-RENS/ROM. We calculated time-dependent temperature distribution in a 3-dimensional Super-ROM disk structure when moving laser beam is irradiated. With a help of commercial software FEMLAB which employed finite element method, we simulated the temperature distribution of ROM structure whose pit diameter is 120-nm with 50-nm depth. Energy absorption by moving laser irradiation, time variations of heat transfer processes, heat fluxes, heat transfer ratios, and temperature distributions of the complicate 3-dimensional ROM structure have been obtained.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.8
• /
• pp.643-649
• /
• 2016

This paper presents a new image cache algorithm for real-time implementation of high-resolution color image warping. The cache memory is divided into four cache memory modules for simultaneous readout of four input image pixels in consideration of the color filter array (CFA) pattern of an image sensor and CFA image warping. In addition, a pipeline structure from the cache memory to an interpolator is shown to guarantee the generation of an output image pixel at each system clock cycle. The proposed image cache algorithm is applied to an FPGA-based real-time color image warping, and experimental results are presented to show the validity of the proposed method.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.5
• /
• pp.225-233
• /
• 2004

A novel real-time color gamut mapping method is described. The color gamut mapping method that is used for enhancing the color reproduction quality between PC monitor and printer devices is adopted for digital TV display quality enhancement. The high definition digital TV display devices operate at the clock speed of around 70MHz ～ 150MHz and permit several nano seconds for real-time gamut mapping. Thus, the concept of three-dimensional reduced resolution look-up table is introduced for real-time processing. The required hardware can be greatly reduced by look-up table resolution adjustment. The proposed hardware architecture is successfully implemented in FPGA and ASIC and also successfully adopted in digital TV display quality enhancement purposes.

• Journal of Environmental Science International
• /
• v.13 no.10
• /
• pp.891-902
• /
• 2004

In order to predict air pollution and Yellow-sand dispersion precisely, it is necessary to clarify the sensitivity of meteorological field input interval. Therefore numerical experiment by atmospheric dynamic model(RAMS) and atmospheric dispersion model(PDAS) was performed for evaluating the effect of temporal and spatial resolution of meteorological data on particle dispersion. The results are as follows: 1) Base on the result of RAMS simulation, surface wind direction and speed can either synchronize upper wind or not. If surface wind and upper wind do not synchronize, precise prediction of Yellow-sand dispersion is strongly associated with upwelling process of sand of particle. 2) There is no significant discrepance in distribution of particle under usage of difference temporal resolution of meteorological information at early time of simulation, but the difference of distribution of particles become large as time goes by. 3) There is little difference between calculated particles distributions in dispersion experiments with high temporal resolution of meteorological data. On the other hand, low resolution of meteorological data occur the quantitative difference of particle density and there is strong tendency to the quantitative difference.

• Korean Journal of Computational Design and Engineering
• /
• v.11 no.4
• /
• pp.315-325
• /
• 2006

It is very often necessary to search for similar parts during designing a new product because its parts are often easily designed by modifying existing similar parts. In this way, the design time and cost can be reduced. Thus it would be nice to have an efficient similarity comparison algorithm that can be used anytime in the design process. There have been many approaches to compare shape similarity between two solids. In this paper, two parts represented in B-Rep is compared in two steps: one for overall appearances and the other for detail features. In the first step, geometric information is used in low level of detail for easy and fast pre-classification by the overall appearance. In the second step, feature information is used to compare the detail shape in high level of detail to find more similar design. To realize the idea above, a multi resolution algorithm is proposed so that a given solid is described by an overall appearance in a low resolution and by detail features in high resolution. Using this multi-resolution representation, parts can be compared based on the overall appearance first so that the number of parts to be compared in high resolution is reduced, and then detail features are investigated to retrieve the most similar part. In this way, computational time can be reduced by the fast classification in the first step while reliability can be preserved by detail comparison in the second step.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.6_2
• /
• pp.559-565
• /
• 2013

Spatial resolution of land covers from remotely sensed images can be increased using super-resolution mapping techniques for soft-classified land cover proportions. A further development of super-resolution mapping technique is downscaling the original remotely sensed image using super-resolution mapping techniques with a forward model. In this paper, the model for increasing spatial resolution of remote sensing multispectral image is tested with real SPOT 5 imagery at 10m spatial resolution for an area in Bac Giang Province, Vietnam in order to evaluate the feasibility of application of this model to the real imagery. The soft-classified land cover proportions obtained using a fuzzy c-means classification are then used as input data for a Hopfield neural network (HNN) to predict the multispectral images at sub-pixel spatial resolution. The 10m SPOT multispectral image was improved to 5m, 3,3m and 2.5m and compared with SPOT Panchromatic image at 2.5m resolution for assessment.Visually, the resulted image is compared with a SPOT 5 panchromatic image acquired at the same time with the multispectral data. The predicted image is apparently sharper than the original coarse spatial resolution image.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.413-416
• /
• 2006

As even small features can be classified as high resolution imagery, urban remote sensing is regarded as one of the important application fields in time of wide use of the commercialized high resolution satellite imageries. In this study, we have analyzed the variogram properties of high resolution imagery, which was obtained in urban area through the simple modeling and applied to the real image. Based on the grasped variogram characteristics, we have tried to decomposed two high-resolution imagery such as IKONOS and QuickBird reducing window size until the unique variogram that urban feature has come out and then been indexed. Modeling results will be used as the fundamental data for variographic analysis in urban area using high resolution imagery later on. Index map also can be used for determining urban complexity or land-use classification, because the index is influenced by the feature size.