• Sleep Medicine and Psychophysiology
• /
• v.3 no.1
• /
• pp.47-55
• /
• 1996

Narcolepsy is characterized by sleep attack with excessive daytime sleepiness(EDS), cataplexy, sleep paralysis, and hypnagogic hallucination. Paradoxically, narcoleptics tend to complain of frequent arousals and shallow sleep during the night time despite their excessive sleepiness. However, nocturnal sleep fragmentation in narcoleptics is relatively ignored in treatment strategies, compared with sleep attack/EDS and cataplexy. In our paper, we attempted to investigate further on the poor nocturnal sleep in narcoleptics and to discuss possible treatment interventions. Out of consecutively seen patients at Seoul National University Sleep Disorders Clinic and Division of Sleep Studies, we recruited 57 patients, clinically assessed as having sleep attack and/or EDS. Nocturnal polysomnography and multiple sleep latency test(MSLT) were done in each of the subjects. We selected 19 subjects finally diagnosed as narcolepsy(mean age $26.0{\pm}18.3$ years, 16 men and 3 women) for this study, depending on the nocturnal polysomnographic and MSLT findings as well as clinical history and symptomatology. Any subject co-morbid with other hypersomnic sleep disorders such as sleep apnea or periodic limb movements during sleep was excluded. Sleep staging was done using Rechtschaffen and Kales criteria. Sleep parameters were calculated using PSDENT program(Stanford Sleep Clinic, version 1.2) and were compared with the age-matched normal values provided in the program. In narcoleptics, compared with the normal controls, total wake time was found to be significantly increased with significantly decreased sleep efficiency(p<.01, p<.05, respectively), despite no difference of sleep period time and total sleep time between the two groups. Stage 2 sleep%(p<.05), slow wave sleep%(p<.05), and REM sleep%(p<.01) were found to be significantly decreased in narcoleptics compared with normal controls, accompanied by the significant increase of stage 1 sleep%(p<.01). Age showed negative correlation with slow wave sleep%(p<.05). The findings in the present study indicate significant fragmentation of nocturnal sleep in narcoleptics. Reduction of REM sleep% and the total number of REM sleep periods suggests the disturbance of nocturnal REM sleep distribution in narcoleptics. No significant correlations between nocturnal polysomnographic and MSLT variables in narcoleptics suggest that nocturnal sleep disturbance in narcoleptics may be dealt with, in itself, in diagnosing and managing narcolepsy. With the objective demonstration of qualitative and quantitative characteristics of nocturnal and daytime sleep in narcoleptics, we suggest that more attention be paid to the nocturnal sleep fragmentation in narcoleptics and that appropriate treatment interventions such as active drug therapy and/or circadian rhythm-oriented sleep hygiene education be applied as needed.

• Safety and Health at Work
• /
• v.1 no.1
• /
• pp.51-60
• /
• 2010

Objectives: The level of benzene exposure in the petrochemical industry during regular operation has been well established, but not in turnaround (TA), where high exposure may occur. In this study, the characteristics of occupational exposure to benzene during TA in the petrochemical companies were investigated in order to determine the best management strategies and improve the working environment. This was accomplished by evaluating the exposure level for the workers working in environments where benzene was being produced or used as an ingredient during the unit process. Methods: From 2003 to 2008, a total of 705 workers in three petrochemical companies in Korea were studied. Long- and short-term (< 1 hr) samples were taken during TAs. TA was classified into three stages: shut-down, maintenance and start-up. All works were classified into 12 occupation categories. Results: The long-term geometric mean (GM) benzene exposure level was 0.025 (5.82) ppm (0.005-42.120 ppm) and the short-term exposure concentration during TA was 0.020 (17.42) ppm (0.005-61.855 ppm). The proportions of TA samples exceeding the time-weighted average, occupational exposure level (TWA-OEL in Korea, 1 ppm) and the short-term exposure limit (STEL-OEL, 5 ppm) were 4.1% (20 samples of 488) and 6.0% (13 samples of 217), respectively. The results for the benzene exposure levels and the rates of exceeding the OEL were both statistically significant (p < 0.05). Among the 12 job categories of petrochemical workers, mechanical engineers, plumbers, welders, fieldman and scaffolding workers exhibited long-term samples that exceeded the OEL of benzene, and the rate of exceeding the OEL was statistically significant for the first two occupations (p < 0.05). Conclusion: These findings suggest that the periodic work environment must be assessed during non-routine works such as TA.

• 보존과학연구
• /
• s.22
• /
• pp.115-132
• /
• 2001

No. 3 Tomb of Bogam-ri, in Naju City, Chollanam-do Province, was a site excavated and inspected from 1996 to 1998 and had a various grave forms, including jar-coffins, stone-chambers and stone-cists. Although most of the metal artifacts excavated from it were severely corroded, we could implement microstructure investigation by collecting samples from the iron axes, iron coffin-nails and iron clamps in which the metal parts were remained. The metal structures were inspected by using metallographic microscope and SEM, and fine components analysis was implemented by ICP. To examine the hardness differences in accordance with the structure distribution, we measured the hardness by structures with Vickers hardness testing machine. As a result of the metal structure inspection, most of them were pure iron, ferrite, and also pearlite, cementite and widmannstaten structures were displayed. We could confirm carbonization was formed on the surface of the iron axes-B, iron coffin-nails-B, and iron clamps-A. There was no carbonization in the rest of the artifacts, and it is not certain that whether the carbonized parts were peeled off through extreme corrosion or they were not carbonized when they were made. In the particular part of a blade, the quality of the material was strengthened through processing. Due to the processing re-grain was caused and fine grain particles were formed. As a result of the ICP component analysis, there were no addition atoms because pure irons were used as materials. In the mean time, No. 17 jar-coffin where the iron axes-A are excavated, is chronologically ordered as from the late-fourth century to the mid-fifth century, and No. 1 and No. 2 stone chambers, where the rest of the artifacts were excavated, as the early-sixth century. It was difficult to relate the periodic differences with the manufacture technique artifacts which we inspected because there were no distinct characteristics of the manufacture technique of the metal structures and it is impossible to conclude the artifacts and sites are at the same period although their periods are different.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.7 s.337
• /
• pp.49-56
• /
• 2005

In this paper, we describe a solution to improve the effects of the transmitter leakage signals on the frequency modulated continuous wave (FMCW) radar with a single antenna configuration. We analyze characteristics of the IF noise caused by insufficient isolation between transmitter and receiver. The magnitude of the intermediate frequency (IF) noise from a front-end can be reduced by matching the LO signal delay time with that of the largest leakage source. Because the IF noise has periodic singularities at nT$_{m}$/2, t=0,1,2$\cdots$, we find that spectrum of the IF noise due to the leakage signals is very similar to that of the VCO moduation signal except low frequency elements in the vicinity of DC. Based on the studies, we fabricated a W-band homodyne FMCW radar sensor and verified the proposed solution. The results are applicable to design of the homodyne FMCW radar with a single antenna configuration.

• Journal of Advanced Navigation Technology
• /
• v.24 no.3
• /
• pp.184-191
• /
• 2020

Avionics System Integration Laboratory is the integrated test environment for integration and verification of avionics systems. When real equipment can not be used in the laboratory for various reasons, software models should be needed. Because there hasn't been any standardized method for the models so that it is difficult to reuse the developed models, the need for a framework to develop the avionics software models was emerged. We adopted DEVS(discrete event system specification) formalism as the standardized modeling method for the avionics software models. Due to DEVS formalism is based on event-driven algorithm, it doesn't accord a legacy system which has sequential and periodic algorithms. In this paper, we propose real-time event-driven modeling and simulation method for SIL to overcome these restrictions and to maximize reusability of avionics models through the analysis of the characteristics and the limitations of avionics models.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.4
• /
• pp.295-303
• /
• 2008

In general, transform domain adaptive filters show faster convergence speed than the time domain adaptive filters, but the amount of calculation increases dramatically as the filter order increases. This problem can be solved by making use of the subband structure in transform domain adaptive filters. In this paper, to increase the convergence speed on the generalized subband decomposition FIR adaptive filters, a structure of the adaptive filter with subfilter of dyadic sparsity factor in wavelet transform domain is designed. And, in this adaptive filter, the equivalent input in transform domain is derived and, by using the input, the convergence properties for the LMS algorithm is analyzed and evaluated. By using this sub band adaptive filter, the inverse system modeling and the periodic noise canceller were designed, and, by computer simulation, the convergence speeds of the systems on LMS algorithm were compared with that of the subband adaptive filter using DFT(discrete Fourier transform).

• Transactions of the KSME C: Technology and Education
• /
• v.2 no.2
• /
• pp.89-97
• /
• 2014

The diesel driven power generation facility provides most of electricity of island region where is isolated from the main land power supply system. It is possible to extend the life of diesel driven power generation facility by periodic maintenance. However, the long-term use of diesel driven power generation facility increases the operating cost due to aging hardware and reduced plant efficiency. In other words, on-time replacement of aging diesel driven power generation facility reduces plant operation cost. The purpose of this study presents major indicators to represent the characteristics of the diesel generator and conducts sensitivity analysis using Monte Carlo analysis. In addition, status core which indicates quantitatively the state of the diesel driven power generation facility is defined and prepare the replacement criteria based on the state score.

• Proceedings of the KSPS conference
• /
• 2007.05a
• /
• pp.143-145
• /
• 2007

Muscle groups that are located in and around the vocal tract can produce audible changes in frequency and/or intensity of the voice. Vocal vibrato is a characteristic feature in the singing of performers trained in the western classical tradition and vibrato is generally considered to result from modulation in frequency amplitude and timbre. Vocal tremor is also characterized by periodic fluctuations in the voice frequency or intensity and vocal tremor is symptom of a neurological disease as Spasmodic dysphonia , Parkinson's disease. Vocal vibrato and Vocal tremor may have many of the same origins and mechanisms in the voice production systems. The purpose of this study is to find acostic character of Korean traditional song Pansori singer's vibrato and Spasmodic dysphonia patient's vocal tremor. twelve Pansori singers and seven Spasmodic dysponia patients participated to this study. Power spectrum and Real time Spectrogram are used to analyze the acoustic characteristics of Pansori singing and Spasmodic dysphonia patient's voice The results are as follows; First, vowel formant differences between Pansori singing and Spasmodic dysphonia patient's voice are higher F1, F3. Second, The vibrato rate show differences between Pansori singing and Spasmodic dysphonia patients;$4^{\sim}6/sec$ and $5{\sim}6/sec$ Vibrato rate of pitch is 5.7 Hz ${\sim}$ 42.4 Hz for Pansori singing , 3.8 Hz ${\sim}$ 27.9 Hz for Spasmodic dysphonia patients ;Vibrato rate of intensity range is 0.07 dB ${\sim}$ 8.26 dB for Pansori singing and 0.07 dB ${\sim}$ 4.81 dB for Spasmodic dysphonia patients

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.3
• /
• pp.76-82
• /
• 2001

Most fluid machines can be considered as periodic noise sources when operated under constant conditions, which allows for a frequency domain representation of the source and the associated acoustic field In the duct. In such a representation, the source is characterized by frequency-dependent values of both strength and impedance. Although knowledge of these values can be gained by either experimentation or by modeling, one-port acoustic characteristics of an in-duct source with high flow velocity, high temperature, and high sound level can be measured only by the multiload method using an overdetermined set of open pipes with different lengths as applied loads. However, the problem is that negative source resistances have been often measured. This paper reviews the possible causes of the problem, with reference to experimental and theoretical results, in an attempt to clarify the issue. A new interpretation is given for the violation of basic assumptions and the defect in the algorithm of multiload method. The major cause and mechanism of the problem is due to the violation of time invariance assumption of the source and the load impedance can seriously affect the final measured result of source impedance.

• Journal of Broadcast Engineering
• /
• v.15 no.3
• /
• pp.321-331
• /
• 2010

Most of multimedia video coding algorithms are lossy schemes and several kinds of spatial and temporal artifacts are inevitable. Flickering, which is the most typical coding artifact in time domain, is mainly due to fact that the quality of coded sequence fluctuates as the quantization parameter is adjusted for rate control. In this paper, we analyzed the effect of quality variation according to the characteristics of video sequence when the I-frames are periodically inserted. And we proposed the FR(Full Reference)-based assessment algorithm to measure the amount of flickering artifacts in the coded video. It is discovered that the flickering becomes critical when the level of quality is intermediate and is affected by the amount of detail or movement, the size of object, and camera parameters. The proposed measurement algorithm shows is well consistent with HVS(Human Visual System).