• 조명전기설비학회논문지
• /
• 제21권1호
• /
• pp.104-110
• /
• 2007

본 논문은 권선내부에 온도계가 설치된 지상변압기를 제작하여 부하운전에 따른 배전용 변압기의 온도상승 특성과 절연유의 유전특성 변화를 관찰하였다. 관찰결과 배전용변압기의 경우 과열점은 세 권선 중 두개의 권선이 접하고 권선의 약 2/3 높이에 위치하고 있으며, 과열점과 절연유 상부 간에 약 $17[^{\circ}C]$의 일정한 온도차를 확인할 수 있었다. 또한 절연유의 정전용량특성은 온도와 선형적인 관계로 감소하는 특성을 보이며, 그 기울기는 열화율과 무관하게 -0.0106의 일정한 값을 관찰할 수 있었다. 이 결과는 수명손실의 정확한 계산과 열화진단을 위한 기구로 활용할 수 있을 것이다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.538-541
• /
• 2006

PSC(Prestressed Concrete) box girder bridges have been widely applied in Korea. A number of these bridges have been built by the segmental construction method in the longitudinal direction and(or) vertically along the cross-sectional depth with MSS(Moving Scaffolding System). An actual 2-span continuous PSC box girder bridge of Kyeongbu high speed railway was selected and instrumented with 96 vibrating wire embedded type strain gauges and 2 thermocouples. The long-term behavior of the bridge was monitored through two major points located at mid-span of the first span and at the internal support. Data collection started just after the casting of the first segment (U section). Concrete strain and temperature data were gathered regularly by a data logger (CR10) during 600 days under and after construction. According to this measurement, the parabolic longitudinal strain distribution in the top slab at mid-span is shown. And also, the same distribution at the interior support is shown. The compressive strains at the cantilever region are larger than at the web position and the internal part in the top slab. Strain difference largely happened during the early construction period.

• Advances in aircraft and spacecraft science
• /
• 제3권4호
• /
• pp.471-502
• /
• 2016

This paper presents the dynamic instability analysis of un-damped elastically supported piezoelectric functionally graded (FG) beams subjected to in-plane static and dynamic periodic thermomechanical loadings with uncertain system properties. The elastic foundation model is assumed as one parameter Pasternak foundation with Winkler cubic nonlinearity. The piezoelectric FG beam is subjected to non-uniform temperature distribution with temperature dependent material properties. The Young's modulus and Poison's ratio of ceramic, metal and piezoelectric, density of respective ceramic and metal, volume fraction exponent and foundation parameters are taken as uncertain system properties. The basic nonlinear formulation of the beam is based on higher order shear deformation theory (HSDT) with von-Karman strain kinematics. The governing deterministic static and dynamic random instability equation and regions is solved by Bolotin's approach with Newmark's time integration method combined with first order perturbation technique (FOPT). Typical numerical results in terms of the mean and standard deviation of dynamic instability analysis are presented to examine the effect of slenderness ratios, volume fraction exponents, foundation parameters, amplitude ratios, temperature increments and position of piezoelectric layers by changing the random system properties. The correctness of the present stochastic model is examined by comparing the results with direct Monte Caro simulation (MCS).

• 한국초전도ㆍ저온공학회논문지
• /
• 제7권4호
• /
• pp.1-3
• /
• 2005

Superconducting $MgB_2$ fibers are in-situ grown by a diffusion method. The fibers are prepared by exposing B filaments to Mg vapor inside a folded Ta foil over a wide range of temperature and growth time. The materials are sealed inside a quartz tube by gas welding. The as - grown fibers are characterized by scanning electron microscopy and energy dispersive x - ray analysis. The fibers have a diameter of about $110{\mu}m$. Surface morphology of the fibers looks dependent on growth temperature and mixing ratio of Mg and B. Radial distribution of Mg ions into B is observed and analyzed over the cross - sectional area. Transport properties of the $MgB_2$ fibers are examined by a physical property measurement system. The $MgB_2$ fibers grown at $900^{\circ}C$ for 2 hours show a superconducting transition at 39.8K with ${\Delta}T_c<$ 2.0 K. Resistance at room temperature $MgB_2$ is 3.745 $\Omega$ and residual resistivity ratio (RRR) is estimated as 4.723.

• Nuclear Engineering and Technology
• /
• 제17권2호
• /
• pp.116-128
• /
• 1985

본 논문에는 이산화 우라늄 소결체의 노내고밀화현상을 온도와 미세구조의 함수로 정화하게 예측할 수 있는 기계론적 이론 모형이 개발.기술되어있다. 이 모형은 $UO_2$ 소결체의 결정 입계내에서 공극(vacancy)이 생성 이동되고, 결정입계에서 공극이 소멸되는 현상을 고려하고 있으며, 이 과정에서 일어나는 고밀화의 크기가 핵분열율, 조사시간, $UO_2$ 소결체밀도, 기공 크기의 분포, 결정입크기 및 온도의 함수로 기술되어 있다. 본 모형의 기공 수축에 대한 결과식은 Assmann과 Stehle가 유도한 4개의 온도 영역에 대한 결과식과는 상이한 것으로서, 소결체의 모든 온도 영역에 직접 적용된다. 본 모형에 의한 노내고밀화 크기의 예측치는 실험자료와 아주 잘 일치하며, KEFDA 전산코드에 사용된 경험적 실험 연산식에 비하여 고밀화의 경향과 절대치를 보다 정확히 예측한다.

• 한국재료학회지
• /
• 제19권5호
• /
• pp.245-252
• /
• 2009

Changes in the surface morphology and light scattering of textured Al doped ZnO thin films on glass substrates prepared by rf magnetron sputtering were investigated. As-deposited ZnO:Al films show a high transmittance of above 80% in the visible range and a low electrical resistivity of $4.5{\times}10^{-4}{\Omega}{\cdot}cm$. The surface morphology of textured ZnO:Al films are closely dependent on the deposition parameters of heater temperature, working pressure, and etching time in the etching process. The optimized surface morphology with a crater shape is obtained at a heater temperature of $350^{\circ}C$, working pressure of 0.5 mtorr, and etching time of 45 seconds. The optical properties of light transmittance, haze, and angular distribution function (ADF) are significantly affected by the resulting surface morphologies of textured films. The film surfaces, having uniformly size-distributed craters, represent good light scattering properties of high haze and ADF values. Compared with commercial Asahi U ($SnO_2$:F) substrates, the suitability of textured ZnO:Al films as front electrode material for amorphous silicon thin film solar cells is also estimated with respect to electrical and optical properties.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 추계학술발표회논문집(1)
• /
• pp.309-314
• /
• 1996

Feasibility study has been accomplished to evaluate the effectiveness of the in-vessel core debris cooling through lower cavity flooding using two dimensional finite difference scheme. The volume of cerium pool and decay power rate generated in corium pool were evaluated as important parameters to the temperature distribution on the reactor vessel lower head through previous works. In this study, the corium volume based on the System 80＋ core structure and time dependent decay power rate are considered for feasibility evaluation. In addition, preliminary plans for the in-vessel core debris cooling through lower cavity flooding as severe accident management strategy, i.e. flooding timing, method and capacity, are suggested based on the result of the numerical study, international tendency related to in-vessel core debris cooling through lower cavity flooding.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1597-1599
• /
• 1996

In this study, we investigated the electrical characteristics such as tracking resistance, dielectric constant, insulating resistance, and arc resistance, of silicone rubber for outdoor use, and, focused on the tracking resistance. In the Inclined Plane Test, two kind of the contamination solutions were used, and their phenomena were observed. The average leakage current and the tracking breakdown time decreased, and erosion rate increased, using anionic surfactant added contaminant solution. The dielectric constant and dissipation factor were increased with increasing temperature.

• 한국농공학회지
• /
• 제45권3호
• /
• pp.116-126
• /
• 2003

In this study, we research about the relationships of human longevity and environments, inducted the significant factors of longevity from the statistical analysis, and represented spatial distribution of longevity using geographic information system. The factors confining human longevity can be categorized by geography/geology, climate/weather, economy, and social welfare. After analyzing statistical data, dependent variable which means the longevity index is defined by the ratio of population more than 85 years old among population more than 65 years old. The results of analysis show that longevity are related with waterworks ratio, temperature, local tax ratio, and latitude. In this study we discussed about the spatial characteristics which are represented by variance of the longevity index and described a spatial relationship between the longevity index and significant factors which are chosen by statistical analysis. In the further study, in order to sustain the longevity of a region, it is necessary for the effective rural planning to propagate a longevity of rural areas.

• Smart Structures and Systems
• /
• 제23권3호
• /
• pp.215-225
• /
• 2019

In the present paper, the nonlocal strain gradient refined model is used to study the thermal stability of sandwich nanoplates integrated with piezoelectric layers for the first time. The influence of Kerr elastic foundation is also studied. The present model incorporates two small-scale coefficients to examine the size-dependent thermal stability response. Elastic properties of nanoplate made of functionally graded materials (FGMs) are supposed to vary through the thickness direction and are estimated employing a modified power-law rule in which the porosity with even type of distribution is approximated. The governing differential equations of embedded sandwich piezoelectric porous nanoplates under hygrothermal loading are derived through Hamilton's principle where the Galerkin method is applied to solve the stability problem of the nanoplates with simply-supported edges. It is indicated that the thermal stability characteristics of the porous nanoplates are obviously influenced by the porosity volume fraction and material variation, nonlocal parameter, strain gradient parameter, geometry of the nanoplate, external voltage, temperature and humidity variations, and elastic foundation parameters.