• 대한토목학회논문집
• /
• 제10권2호
• /
• pp.49-58
• /
• 1990

캔틸레버 시공법에 의해 가설되는 프리스트레스트 콘크리트 교량의 시간 단계별 장기 처짐을 정확하게 해석하지 위해 프리스트레스트 콘크리트의 시간 의존적 재료 특성과 캔틸레버 공법에 있어서의 분할시공 과정을 고려할 수 있는 해석 모델을 개발하고, 이에 기초하여 콤퓨터 프로그램을 작성하였다. 본 프로그램에서는 시간의 경과에 따른 콘크리트의 크리프, 건조 수축 및 탄성 계수의 변화 그리고 PS 강재의 리락세이션을 고려한다. 그리고 시공 단계별 세그먼트의 발생, 다단계 프리스트레싱 그리고 지점조건의 변화를 고려한다. 또한 철근으로 인한 단면의 강성 증가를 고려하고 전단변형의 영향을 고려하여 보다 정확하게 해석할 수 있도록 하였다. 본 프로그램을 이용하여 다경간 PS 콘크리트 교량을 해석함으로써, 프로그램의 실제 적용성과 캔틸레버공법에 의한 교량의 거동 특성을 규명하고자 하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.119-124
• /
• 2001

A general procedure to implement the sensitivity analysis of PSC flexural members is proposed based on the analytical calculation of the gradients of stresses and strains with respect to the 21 design variables in a closed format. The formulation covers the long term losses including concrete creep, shrinkage, and PS steel relaxation as well as load effects. The derived formulation is applied to the rectangular section PSC beam with prestressing and nonprestressing steels for the sensitivity analysis. The analytically calculated sensitivity results are compared with those numerically calculated.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.355-362
• /
• 2001

This study deals with cracking control of concrete deck in steel-concrete composite bridges according to the concrete slab casting sequences. In correlation studies between casting sequences, time dependent effects of concrete creep and shrinkage are implemented in the analytical model. Finally, the methods of cracking control in terms of concrete slump and relative humidity are suggested to prevent early transverse cracking of concrete slab.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2001년도 춘계학술발표대회 개요집
• /
• pp.104-107
• /
• 2001

Creep-fatigue crack growth behavior at the heat affected zone of 1Cr-0.5Mo steel weldment has been experimentally studied. Load hold times of the tests for trapezoidal fatigue wave-shapes were varied among 0, 30, 300 and 3,600 seconds. Time-dependent crack growth rates were characterized by the $C_{t}$ estimated with the equation proposed by the previous finite element analysis work. It was concluded that the $C_{t}$ values calculated from the properties of parent metal were quite comparable to the accurate $C_{t}$ values calculated from both of weld and parent metals.etals.

• KCI Concrete Journal
• /
• 제11권3호
• /
• pp.45-52
• /
• 1999

A Computer-based iterative method is provided for the calculation of minimum thickness values for one-way slabs to satisfy the maximum permissible limits given in the ACI Building Code. An algorithm includes the effects of cracking and time-dependent effects due to creep and shrinkage. Comparison of the calculated minimum thickness values with the current ACI limits is conducted to investigate limitations of the current tabulated minimum thickness. which are constant to a range of design conditions.

• 콘크리트학회논문집
• /
• 제18권1호
• /
• pp.29-36
• /
• 2006

초고층 건물에서 널리 사용되고 있는 SRC 기둥은 콘크리트의 크리프와 건조수축으로 인하여 시간 의존적인 거동을 보인다. 이러한 장기거동은 초고층 구조물에 기둥의 부등 축소량을 야기시키게되어 심각한 사용성 문제와 구조적 문제를 유발하게 되므로 구조물의 장기 변형을 정확히 예측하는 것이 중요하다. 최근 연구보고에 따르면 SRC 기둥의 장기변형은 RC 기둥의 장기변형과 매우 다른 양상을 보이고 있다. 따라서 SRC 기둥의 축소량을 정량적으로 예측하기 위해서는 기존의 평균적인 개념의 해석방법과는 다른 SRC 기둥의 수분확산 특성을 고려할 수 있는 새로운 해석방법이 요구된다. 이 연구에서는 RC 기둥과 SRC 기둥이 보이는 장기거동이 서로 다른 원인을 수분확산 특성에 주안점을 두어 검토하였다. SRC 기둥은 내부 형강의 플랜지가 콘크리트의 수분확산을 제한하게 되어 RC 기둥과는 다른 수분분포를 보이게 되며, 이러한 부등수분분포의 영향으로 인해 건조수축과 건조크리프의 양이 감소하게 된다. 따라서 SRC 기둥의 축소량을 보다 합리적이고 정확히 예측하기 위해서는 수분확산 해석을 통해 수분분포를 파악하고 이를 건조수축과 건조크리프 해석에 적용함으로써 단면 내부의 부등수분분포를 고려하여야 한다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.257-264
• /
• 2003

Tunnelling in water bearing soils influences the ground water regime. It has been indicated in the literature that the existence of ground water above a tunnel influences tunnel stability and the settlement profile. Only limited research, however, has been done on ground water movements around tunnels and their influence on tunnel performance. Time dependent soil behaviour can be caused by the changes of pore water pressure and/or the viscous properties of soil(creep) under the stress change resulting from the advance of the tunnel face. De Moor(1989) demonstrated that the time dependent deformations due to tunnelling are mainly the results of pore pressure dissipation and should be interpreted in terms of effective stress changes. Drainage into tunnels is governed by the permeability of the soil, the length of the drainage path and the hydraulic boundary conditions. The potential effect of lime dependent settlement in a shallow tunnel is likely to occur rapidly due to the short drainage path and possibly high coefficient of consolidation. Existing 2D modelling methods are not applicable to these tunnelling problems, as it is difficult to define empirical parameters. In this paper the time-based 2D modelling method is adopted to account for the three dimensional effect and time dependent behaviour during tunnel construction. The effect of coupling between the unloading procedure and consolidation during excavation is profoundly investigated with the method. It is pointed out that realistic modelling can be achieved by defining a proper permeability at the excavation boundary and prescribing appropriate time for excavation Some guidelines for the numerical modelling of drained and undrained excavation has been suggested using characteristic time factor. It is highlighted that certain range of the factor shows combined effect between the unloading procedure due to excavation and consolidation during construction.

• 한국지반공학회논문집
• /
• 제19권4호
• /
• pp.191-200
• /
• 2003

본 연구는 말뚝 부마찰력 저감용으로 사용하는 역청재료의 유변학적 특성을 분석한 결과이다. 역청재료는 효과적으로 부마찰력을 저감시키고 경제적인 장점으로 인하여 말뚝의 부마찰력 저감 공법으로 사용하여 왔다. 본 연구에서는 세 종류의 말뚝용 역청재료를 선택하여 비교 시험을 실시하였다. 물리적 특성시험으로는 침입도 시험, 연화점 시험 및 침입도 지수를 실시하였으며 유변학적 시험으로는 동적전단 유동기를 사용하여 위상각, 복합계수, 크리프시험 및 흐름시험을 시험온도 15, 30, 45 및 6$0^{\circ}C$에서 수행하였다. 시험 결과는 역청재료의 유변학적 특성을 나타내는 위상각, G$^*$/sin $\delta$, 크리프 컴플라이언스 및 전단점도로 분석하여 상호 비교하였다. 시험 결과 온도와 위상각은 비례관계를 나타냈으며 G$^*$/sin $\delta$는 반비례 관계를 보였다. 또한, 크리프 컴플라이언스는 하중시간이 증가함에 따라 증가하여 역청재료가 시간의 변화에 따라 점성유체로 작용하는 것으로 나타났다. 크리프시험으로 인한 시간 및 온도의 변화는 크리프 컴플라이언스 값을 크게 변화 시켰으나 전단점도의 변화는 그다지 심하게 나타나지 않아서 말뚝 역청재료의 평가에는 크리프 컴플라이언스를 측정 할 수 있는 크리프시험이 적절한 것으로 평가되었다. 본 연구에서 유변학적 시험을 실시한 결과 물리적 시험으로부터 분석할 수 없는 온도와 시간의 변화에 따른 역청재료의 특성변화를 상세하게 분석할 수 있었는데 이러한 시험 결과는 말뚝용 역청재료의 선정에 큰 영향을 미칠 것으로 판단된다.

• 한국생산제조학회지
• /
• 제7권6호
• /
• pp.117-125
• /
• 1998

The paper attempts to estimate the incubation time of a cavity in the interface between a power law creep particle and an elastic matrix subjected to a uniaxial stress. Since the power law creep particle is time dependent, the stresses in the interface relax. The volume free energy associated with Helmholtz free energy includes strain energies caused by applied stress and dislocations piled up in interface(DPI). The energy due to DPI is found by modifying the result of Dundurs and Mura[4]. The volume free energies caused by both applied stress and DPI are a function of the cavity size(r) and elapsed time(t) and arise from stress relaxation in the interface. Critical radius $r^*$ and incubation time $t^*$ to maximise Helmholtz free energy is found in present analysis. Also, kinetics of cavity formation are investigated using the results obtained by Riede [7]. The incubation time is defined in the analysis as the time required to satisfy both the thermodynamic and kinetic conditions. Through the analysis it is found that 1) strain energy caused by the applied stress does not contribute significantly to the thermodynamic and kinetic conditions of a cavity formation, 2) in order to satisfy both thermodynamic and kinetic conditions, critical radius $r^*$ decreases or holds constant with increase of the time until the kinetic condition(eq. 2.3) is satisfied. there for the cavity may not grow right after it is formed, as postulated by Harris [15], and Ishida and Mclean [16], 3) the effects of strain rate exponent (m), material constant $\sigma$0, volume fraction of the particle to matrix(f)and particle size on the incubation time are estimated using material constants of the copper as matrix.

• Steel and Composite Structures
• /
• 제17권4호
• /
• pp.405-429
• /
• 2014

In this paper, it is aimed to determine the structural behavior of suspension bridges considering construction stages and different soil conditions. Bosporus Suspension Bridge connecting the Europe and Asia in Istanbul is selected as an example. Finite element model of the bridge is constituted using SAP2000 program considering existing drawings. Geometric nonlinearities are taken into consideration in the analysis using P-Delta large displacement criterion. The time dependent material strength of steel and concrete and geometric variations is included in the analysis. Time dependent material properties are considered as compressive strength, aging, shrinkage and creep for concrete, and relaxation for steel. To emphases the soil condition effect on the structural behavior of suspension bridges, each of hard, medium and soft soils are considered in the analysis. The structural behavior of the bridge at different construction stages and different soil conditions has been examined. Two different finite element analyses with and without construction stages are carried out and results are compared with each other. At the end of the analyses, variation of the displacement and internal forces such as bending moment, axial forces and shear forces for bridge deck and towers are given in detail. Also, displacement and stresses for bridge foundation are given with detail. It can be seen from the analyses that there are some differences between both analyses (with and without construction stages) and the results obtained from the construction stages are bigger. It can be stated that the analysis without construction stages cannot give the reliable solutions. In addition, soil condition have effect on the structural behavior of the bridge. So, it is thought that construction stage analysis using time dependent material properties, geometric nonlinearity and soil conditions effects should be considered in order to obtain more realistic structural behavior of suspension bridges.