• Journal of Korean Institute of Industrial Engineers
• /
• v.31 no.4
• /
• pp.341-348
• /
• 2005

This paper is concerned with the question of servicing warranties for repairable items. During the warranty period, each time an item fails the manufacturer has the obligation to restore the item to operational condition either by repairing the item or by replacing it with a new item. In this paper, we consider repair-replacement strategies based on the condition of the failed item. For products with phase-type lifetime distributions where the phases represent the condition of the item, we develop algorithms to determine the expected cost of servicing a warranty and use it in making the repair-replacement decision. Illustrative numerical examples are presented. We also propose a dynamic strategy by taking the expected remaining warranty cost into consideration.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.3
• /
• pp.195-206
• /
• 2022

The primary purpose of this study was to analyze assessment factors by identifying and prioritizing live fire shooting area requirements using the AHP (Analytic Hierarchy Process) technique. Derived assessment factors for candidate sites were divided into six categories. Of these, four categories (base-to-range distance, weapon danger area, range terrain, and size) were in the realm of physical geography while the remaining two (land use and proximity to habitation) fell under the general heading of human geography. A case study was also conducted to select several alternative firing ranges using derived factors. The optimal location was analyzed by evaluating the candidate site using each assessment factor. As a result, it was found that assessment factors applying to GIS (Geographic Information System) were able to effectively analyze a suitable location for relocation of the focal training facility, taking into consideration public-safety issues, training requirements, and residents' past and likely future complaints. Through this process, it can prevent the waste of time and effort in determining an optimal location for a live fire shooing range.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.209-211
• /
• 2005

This paper proposes a adaptive medium-access control(MAC) protocol designed for low-power wireless multi-hop sensor networks which is used for connecting physical world and cyber computing space. Wireless multi-hop sensor networks use battery-operated computing and sensing device. We expect sensor networks to be deployed in an ad hoc fashion, with nodes remaining inactive for long time, but becoming suddenly active when specific event is detected. These characteristics of multi-hop sensor networks and applications motivate a MAC that is different from traditional wireless MACs about power conservation scheme, such as IEEE 802.11. Proposed MAC uses a few techniques to reduce energy consumption. Result show that proposed MAC obtains more energy savings.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.279-282
• /
• 2003

This paper proposes a medium-access control(MAC) protocol designed for wireless multi-hop sensor networks which is used for connecting physical world and cyber computing space. Wireless multi-hop sensor networks use battery-operated computing and sensing device. We expect sensor networks to be deployed in an ad hoc fashion, with nodes remaining inactive for long time, but becoming suddenly active when specific event is detected. These characteristics of multi-hop sensor networks and applications motivate a MAC that is different from traditional wireless MACs about power conservation scheme, such as IEEE 802.11. Proposed MAC uses a few techniques to reduce energy consumption. Result show that proposed MAC obtains more energy sayings.

• Journal of Korean Academy of Nursing
• /
• v.21 no.3
• /
• pp.349-364
• /
• 1991

Recognition of the usefulness and the importance of the nursing diagnosis is increasing. There is a prevailing opinion that nursing diagnosis should be used to improve the quality of nursing care. Developing standardized nursing care palns based on nursing diagnoses is therefore considered one of the most essential projects for professional growth and improvement in the nursing world of Korea. Consequently, in the first stage of this research project, the ten nursing diagnses used most frequently with patients on medical and surgical wards were determined and related nursing care plans were developed, implemented and evaluated. The application of the standardized nursing care plans raised the nurses' confidence and proved to be effective in enhancing the quality of nursing care. This study was initiated as the next stage, to develop, test, and determine the validity of nursing care plans for the remaining nursing diagnoses. Nineteen medical and surgical wards were selected for the study ; the 176 staff nurses working on those wards and 1211 patients hospitalized there (603 patients during the nursing care plan use) took part in the project. The following summarizes the results of the study : 1. After listing all the nursing diagnoses up to the 20th in frequency from each ward except the ten used in the first study, 22 nursing diagnoses were selected. Two related to ‘self care deficit’, were combined into one. Standardized nursing care plans were established for these 21 nursing diagnoses. 2. The first page of each nursing care plan lists the related factors and defining characteristics as supporting data. The application rate distribution revealed that the majority were recorded less than 50% of the time. For each nursing diagnosis, only one to three related factors were recorded more than 50% of the time regardless of the number of suggested related factors, and similarly, only one to five defining characteristics were recorded more than 50% of the time regardless of the number of suggested defining characteristics. Therefore, these factors and defining characteristics were proposed as the common related factors and the typical signs and symptoms for each nursing diagnosis. 3. The application rate distribution for the expected outcomes, and the nursing orders that were the main data of each nursing care plan occurred more than 50% of the time, unlike the related factors and the characteristics that occurred less frequently. These findings supported the clinical validity. 4. In an effort to evaluate indirectly the effect of the use of the standardized nursing care plans, nurses' job satisfaction and perceptions of their ability in the use of the nursing process were measured and compared. Scores after the use of the plans were significantly higher than those before. The experience in actually using the standardized nursing care plans with patients increased the nurses' professional and emotional satisfaction and their confidence in using the nursing process. Also when the nurses who actually used the nursing care plans were asked to rate their effectiveness, the highest score was given to ‘the ease of establishing the nursing goal’, followed by ‘improved professional advice and care for patients’, ‘the efficiency and systemization of charting’, ‘the definite recognition of the nursing problem’, and ‘the selection of effective and appropriate nursing interventions’ in descending order. The results indicate the nurses were very positive about the effect of the real clinical application of standardized nursing care plans, and that the objective of this study to utilize the nursing diagnosis to strengthen the nursing process was attained.

• Journal of Korea Foundry Society
• /
• v.38 no.3
• /
• pp.55-59
• /
• 2018

To optimize the conductivity and to reduce the weight by as much as possible, Al-Cu composites were prepared through a suction-casting procedure. Pure copper metal foam was infiltrated by melted aluminum with the use of the vacuum, after which warm rolling was conducted to remove several remaining pores at the interface between the Cu foam and the aluminum matrix. Despite the short casting time, significant dissolution of Cu into the melt was observed. Moreover, it was found that various Al-Cu intermetallic compounds arose at the interface during the isothermal heating process after the casting and rolling steps. The average thickness of the Al-Cu intermetallic compound tended to increase in proportion to the heating time. The electrical and thermal conductivity levels of the cast composites were found to be comparatively low, mainly due to the dissolution of the Cu foam and the formation of intermetallics at the interface.

• Journal of Welding and Joining
• /
• v.16 no.1
• /
• pp.70-76
• /
• 1998

Most fossil power plants and many critical components will be approaching the end of their nominal design life. At the same time, utilities are finding it economically attractive to extend the use of these plants for several more years, Especially Main steam pipe that operated under high temperature and pressure, often under the more severe operating conditions associated with cycling duty, is most important pipe system and critical component in fossil power plant. To extend the viability of older pipe system and to improve the operation and maintenance reliability, some technologies of precise diagnosis and life management have evolved out of the necessity. The purpose of this study is to descrive the related technologies and show the example of one power plants. The purpose of this study is to descrive the related technologies and show the example of one power plants. The stress analysis was done using ANSYS FEM Code. The branch area from main steam to turbine was the high stressed zone. To evaluate the degradation of the pipe material, replica, visual check, magnetic test, hardness test were done at the welding spot. The degradation level of welding point was E/F, so the remaining life of the welded area was about 0-25%.

• Food Science of Animal Resources
• /
• v.38 no.6
• /
• pp.1216-1225
• /
• 2018

Shelf-life is defined as the amount of time during which a food product retains its desired sensory, chemical, and physical characteristics while remaining safe for consumption. The food industry needs to rapidly obtain the necessary information for determining the shelf life of its products. Here we studied the approaches available for conducting accelerated shelf-life tests. Accelerated shelf-life testing is applied to a variety of products to rapidly estimate change in characteristics with time. The aim of this work was to use accelerated shelf-life testing to study the changes in pH, microbiology, and sensory characteristics of ice cream by the application of a kinetic approach and, based on the observations, to estimate its shelf life. As per the current law, there is no shelf life on ice cream. Our results suggest that the shelf life of an ice cream sample was 24.27 months at $-18^{\circ}C$, 2.29 months at $-6^{\circ}C$, 0.39 months at $-1^{\circ}C$, and 0.15 months at $4^{\circ}C$. Results of this study suggest that a set expiration date on ice cream might also contribute to effective management of ice cream characteristics in the retail chilled chain.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.1
• /
• pp.14-20
• /
• 2016

This paper describes a green stripping process to effectively strip the remaining DFR layer on a non-alkali-based ITO glass surface after an etching process. A stripper, water-soluble amine compound, is used to investigate the characteristics of stripping ability and to suggest a valid method for the green process. Increasing the composition (5-30% concentration) of the ethanol amine-based stripper was found to greatly reduce the stripping time applied in the dipping method. The composition (30%) achieved an excellent stripping effect and free-residue impurities. Additionally, it was possible to obtain the effect of stripping in a way to sustain the release before generating DFR sludge from the ITO glass surface by using dipping condition (stripping time) in the composition. An Additional stripping process (buffering) out of dipping can realize productivity improvement and cost reduction because of the higher proportion of re-use of the stripping solution used in the DFR removal step.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.1
• /
• pp.73-82
• /
• 2004

Statment of problem : Little in known about the importance of selection of various double crowns as retainer in determining the outcome of treatment with double crown retained removable partial denture. Purpose : To obtain information about the effects and the results of this treatment modality. Material and methods : This study describes 61 double crown retained removable partial dentures worn by 51 patients from Samsung Medical Center, Seoul a time ranging between 6 and 48 months and evaluate occlusal contacts on the denture teeth, denture movement, incidence of denture relining, denture retention, fracture of dentures and abutments, hygiene, residual ridge inflammatory changes, number of lost abutment,. interruption of denture use. Results : One tenth of all the restorations were relined. Restorations in 21 arches fractured repeatedly for various reasons . There was no apparent interrelationship between fractures and the five groups. Conclusion : Good prognoses of removable partial dentures were shown in all groups(Kennedy Classes I, II, III, combination and few remaining abutment).