• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.2
• /
• pp.152-160
• /
• 2008

In this paper, we analyze the performance of a direct-conversion UHF RFID reader with the range correlation effects of the phase noise. Since a UHF RFIB system uses the same oscillator to generate the transmitted carrier and the local oscillation, the periodic interference and phase noise reduction effects occur due to time delay between two signals. Through exact theory and simulation, we verify how to cancel the periodic interference phenomena using I/Q diversity combining technique. And, we analyze phase noise reduction effects due to range correlation as a function of the tag-reader distance and the offset frequency Using these results, we simulate the symbol-error-rate performance with respect to phase noise with and without range correation effects. We show that the phase noise of the local oscillator has little effect on the symbol-error-rate performance because of phase noise reduction by range correlation.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.11a
• /
• pp.156-157
• /
• 2005

Gas hydrate is ice-like crystalline lattice, formed at appropriate temperature and pressure, in which gas molecules are trapped. It is worldwide popular interesting subject as a potential energy. In korea, a seismic survey for gas hydrate have performed over the East sea by the KIGAM since 1997. In this paper, we had conducted numerical and physical modeling experiments for seismic properties on gas hydrate with field data which had been acquired over the East sea in 1998. We used a finite difference seismic method with staggered grid for 2-D elastic wave equation to generate synthetic seismograms from multi-channel surface seismic survey, OBC(Ocean Bottom Cable) and VSP(Vertical Seismic Profiling). We developed the seismic physical modeling system which is simulated in the deep sea conditions and acquired the physical model data to the various source-receiver geometry. We carried out seismic complex analysis with the obtained data. In numerical and physical modeling data, we observed the phase reversal phenomenon of reflection wave at interface between the gas hydrate and free gas. In seismic physical modeling, seismic properties of the modeling material agree with the seismic velocity estimated from the travel time of reflection events. We could easily find out AVO(Amplitude Versus Offset) in the reflection strength profile through seismic complex analysis.

• Wind and Structures
• /
• v.23 no.2
• /
• pp.157-169
• /
• 2016

The structural integrity of tube bundles represents a major concern when dealing with high risk industries, such as nuclear steam generators, where the rupture of a tube or tubes will lead to the undesired mixing of the primary and secondary fluids. Flow-induced vibration is one of the major concerns that could compromise the structural integrity. The vibration is caused by fluid flow excitation. While there are several excitation mechanisms that could contribute to these vibrations, fluidelastic instability is generally regarded as the most severe. When this mechanism prevails, it could cause serious damage to tube arrays in a very short period of time. The tubes are therefore stiffened by means of supports to avoid these vibrations. To accommodate the thermal expansion of the tube, as well as to facilitate the installation of these tube bundles, clearances are allowed between the tubes and their supports. Progressive tube wear and chemical cleaning gradually increases the clearances between the tubes and their supports, which can lead to more frequent and severe tube/support impact and rubbing. These increased impacts can lead to tube damage due to fatigue and/or wear at the support locations. This paper presents simulations of a loosely supported multi-span U-bend tube subjected to turbulence and fluidelastic instability forces. The mathematical model for the loosely-supported tubes and the fluidelastic instability model is presented. The model is then utilized to simulate the nonlinear response of a U-bend tube with flat bar supports subjected to cross-flow. The effect of the support clearance as well as the support offset are investigated. Special attention is given to the tube/support interaction parameters that affect wear, such as impact and normal work rate.

• Journal of Korean Society of Rural Planning
• /
• v.22 no.1
• /
• pp.37-48
• /
• 2016

The purpose of this study is to provide an objective insight for factors that affect people's visiting behavior to educational farms. Second, this study aims to identify the underlying dimensions representing motivations and constraints for visiting educational farms. Third, this study explores differences among the classified groups with respect to structural relationships of each construct. Finally, identifying strategies of educational farm-related organizations could develop to reinforce visit motivations, offset visit constraints and ultimately increase behavioral intention for potential possible visitors to revisit and recommend educational farms. Empirical results of the study suggest implications for promoting the current farm villages and markets with many stakeholders in agricultural industries. Nevertheless, there are some limitations as followed: first, despite the possibility of their effects, the study did not consider other factors, which could affect revisiting behavior such as destination image, experiencing attributes etc. Second, the study needs improvements through longitudinal research because the cross-sectional research could not rule out the alternative explanations. The directions for the future study are as follows: first, future study requires time series approach instead of cross sectional approach. Secondly, future study might utilize comparative study regarding regional characteristics of educational farms or a nation-wide approach. Thirdly, future study can suggest a combined educational farms considering practical educational farm cases. Lastly, it is considered that developing evaluation measures such as quality authentication system will contribute to educational farms' stabilization.

• Publications of The Korean Astronomical Society
• /
• v.20 no.1 s.24
• /
• pp.135-141
• /
• 2005

The FIMS(Far-ultraviolet IMaging Spectrograph), the main payload onboard the first Korean Science Technology SATellite, STSAT-1, has performed various astronomical observations, including the Cygnus Loop, Vela supernova remnants, LMC(Large Magellanic Cloud), since its launch on September 2003. It has been found that the attitude information provided by spacecraft bus system has the errors of more than about 10-15 arcmins due to the time offset problem and errors in attitude knowledge. We develop an algorithm for correction of position errors in FIMS data. The aspect for the FIMS data is determined by comparing the positions of observed bright stars with the Tycho-II and TD-1 catalogs. The position errors of the bright stars along the scanning (${\gamma}$) and spatial (${\delta}$) directions were considered as functions of ${\delta}$, ignoring errors in position angle. The corrected positions of the bright stars coincided very well to their Tycho-II and TD-I positions. The correction algorithm is essential for the FIMS data analysis, and is being used for the FIMS data analysis.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.1
• /
• pp.29.1-29.1
• /
• 2017

I present new near-infrared (NIR) photometry of globular cluster (GC) systems associated to a cD galaxy NGC 4874 in the core of the Coma cluster and 16 early-type galaxies in the Fornax and Virgo clusters of galaxies using the Infrared Channel of the Wide Field Camera 3 (WFC3/IR) on board the Hubble Space Telescope (HST). Combining these high-resolution NIR data with new HST Advanced Camera for Surveys (ACS) optical photometry for NGC 4874 and existing ACS GC catalogs from the ACS Fornax and Virgo Cluster Surveys, I have examined for the first time the GC systems in a statistically significant optical/NIR sample of galaxies spanning a wide range of luminosities and colors. A primary goal of this study is to explore empirically whether the distributions of purely optical and hybrid optical - NIR color indices for extragalactic GCs have different forms and whether the relations between these color indices are nonlinear, indicating that they behave differently with underlying metallicity. I find that some GC systems of large galaxies in our sample show color bimodalities that differ between the optical and optical - NIR colors, in the sense that they have disparate ratios of "blue" and "red" peak GCs, as well as differing ratios in their color dispersions. Consistent with these results, I find empirically that the dependence of hybrid optical-NIR color on purely optical color is nonlinear, with an inflection at intermediate metallicities. These findings underscore the importance of understanding the nature of galaxy-to-galaxy variations in the GC color distributions and color-color relations, as well as the exact forms of the color-metallicity transformations, in interpreting the observational data on GC color bimodality. Our ACS data for NGC 4874 shows that its GC system exhibits a very strong blue tilt, implying a very steep mass-metallicity scaling, and the centroid of this GC system is offset by $4{\pm}1kpc$ from the luminosity center of NGC 4874, in the direction of NGC 4872. Finally, I discuss the asymmetrical GC distribution around a dwarf elliptical galaxy in Coma that has a very high relative velocity with respect to the cluster mean at small clustercentric radius.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.9
• /
• pp.1073-1082
• /
• 1999

본 논문에서는 시스템 내의 프로세서들을 효과적으로 사용하기 위한 적응적 프로세서 할당 정책을 제안한다. 프로그램의 병렬성을 향상시키기 위하여 일반적으로 병렬 처리에 사용될 프로세서 개수를 증가시킨다. 그러나 증가된 프로세서들은 그레인 크기에 변화를 일으키며 이는 캐쉬 성능에 영향을 미친다. 특히 대역이 제한된 공유 버스를 사용하는 시스템에서는 프로세서 개수의 증가는 공유 버스에 대한 접근 경쟁을 크게 증가하므로 버스에서 대기하는 시간이 프로세서 증가에 의한 계산 능력 이득을 상쇄시키는 주요한 원인이 되고 있다. 본 논문에서 제안한 적응적 프로세서 할당 정책은 프로그램이 수행되는 도중에 임의의 기간동안 공유버스에 대기중인 프로세서 분포에 관한 정보를 얻는다. 그리고 이 정보를 바탕으로 프로세서 개수를 변경하는 방법이다. 모의 시험에서 적응적 프로세서 할당 정책은 프로그램들의 버스 트래픽 특성에 따른 최적의 적합한 프로세서 개수를 발견함을 보인다. 그리고 적응적 프로세서 할당 정책은 고정된 프로세서 개수를 사용한 가장 좋은 성능보다는 다소 떨어진 성능을 나타내었으나 시스템의 프로세서 활용성을 높여 효과적 시스템 사용에 기여함을 보인다. Abstract In this paper, the adaptive processor allocation policy is suggested to make effective use of processors in system. To enhance the parallelism, the number of processors used in the parallel computing may be increased. However, increasing the number of processors affects the grain size of the parallel program. Therefore, it affects the cache performance. In particular, when the shared bus is employed, since increasing the number of processors can result in a significant amount of contention to achieve the shared-bus, the increased computing power is offset by the bus waiting time due to these contentions. The adaptive processor allocation policy acquires the information about the distribution of waiting processors on shared bus for any execution period of programs. And it changes the number of processors working in parallel processing during the program's run. Our simulation results show that the adaptive processor allocation policy finds the optimum feasible number of processors based on the bus traffic characteristic of programs. Thus, it contributes to effective system utilization, even though it performs slightly less efficiently than using a fixed number of processors with the best performance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.1
• /
• pp.166-174
• /
• 2010

SSDs are one of the best media to support portable and desktop computers' storage devices. Their features include non-volatility, low power consumption, and fast access time for read operations, which are sufficient to present flash memories as major database storage components for desktop and server computers. However, we need to improve traditional index management schemes based on B-Tree due to the relatively slow characteristics of flash memory operations, as compared to RAM memory. In order to achieve this goal, we propose a new index management scheme based on a compressed hot-cold clustering called CHC-Tree. CHC-Tree-based index management improves index operation performance by dividing index nodes into hot or cold segments and compressing pointers and keys in the index nodes and clustering the hot or cold segments. The offset compression techniques using unused free area in cold index node lead to reduce the number of slow erase operations in index node insert/delete processes. Simulation results show that our scheme significantly reduces the write and erase operation overheads, improving the index search performance of B-Tree by up to 26 percent, and the index update performance by up to 23 percent.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.629-632
• /
• 2007

While conventional interferometric SAR (InSAR) technique is an excellent tool for displacement observation, it is only sensitive to one-dimensional deformation along the satellite's line-of-sight (LOS). Recently, a multiple aperture interferogram (MAI) technique has been developed to overcome this drawback. This method successfully extracted along-track displacements from InSAR data, based on split-beam InSAR processing, to create forward- and backward- looking interferograms, and was superior to along-track displacements derived by pixel-offset algorithm. This method is useful to measure along-track displacements. However, it does not only decrease the coherence of MAI because three co-registration and resampling procedures are required for producing MAI, but also is confined to a suitable interferometric pair of SAR images having zero Doppler centroid. In this paper, we propose an efficient and robust method to generate MAI from interferometric pair having non-zero Doppler centroid. The proposed method efficiently improves the coherence of MAI, because the co-registration of forward- and backward- single look complex (SLC) images is carried out by time shift property of Fourier transform without resampling procedure. It also successfully removes azimuth flat earth and topographic phases caused by the effect of non-zero Doppler centroid. We tested the proposed method using ERS images of the Mw 7.1 1999 California, Hector Mine Earthquake. The result shows that the proposed method improved the coherence of MAI and generalized MAI processing algorithm.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.130-133
• /
• 2007

In order to get high quality and high resolution image data from the space-borne camera system, the image chain from the sensor to the user in the ground-station need to be designed and controlled with extreme care. The behavior of the camera system needs to be controlled by ground commands to support on-orbit calibration and to adjust imaging parameters and to perform early stage on-orbit image correction, like gain and offset control, non-uniformity correction, etc. The operation status including the temperature of the sensor needs to be transferred to the ground-station. The preparation time of the camera system for imaging with specific parameters should be minimized. The camera controller needs to synchronize the operation of cameras for every channel and for every spectral band. Detail timing information of the image data needs to be provided for image data correction at ground-station. In this paper, the design of the camera controller for the AEISS on KOMPSAT-3 will be introduced. It will be described how the image chain is controlled and which imaging parameters are to be adjusted The camera controller will have software for the flexible operation of the camera by the ground-station operators and it can be reconfigured by ground commands. A simple concept of the camera operations and the design of the camera controller, not only with hardware but also with controller software are to be introduced in this paper.