• 한국축산시설환경학회지
• /
• 제3권2호
• /
• pp.87-95
• /
• 1997

This study was peformed to compare work routine time and performance of milking systems by measuring motion and time in milking procedure. Data were collected from thirteen dairy farms among which milking was done by bucket in two farms, by pipelines in three, by tandem parlors in four including one remodeled side-opening, by herringborn parlors in three and by a parallel milking parlor. Recording time and motion for milking parlor. Recording time and motion for milking procedure was performed by stopwatch and notebook computer. Work routine elements were recorded and calculated into cows milked per-man-hour(CMPH). The results are as follows : Average milking time per cow(MTPC) in bucket and pipeline milking systems usually installed in cow stall were 442.7 and 395.8 seconds, respectively. And average CMPH of bucket and pipeline milking system were 144.5, 303.3, 272.5 and 380.3 seconds, respectively. And CMPH of tandem, herringbone, parallel and modified side-opening systems were 24.9, 11.9, 13.2 and 9.5 heads, respectively. CMPH was the highest in the tandem milking system and the lowest in the bucket milking facilities. CMPH, when milked in a parlor resulted in high value compared with bucket or pipeline milking systems installed in cow stable. They showed considerably low CMPH compared with the results of other countries. The reason why so low CMPH could be derived from type and mechanization of facilities and equipment, operator's ability, number of operator, idle time and milking procedure.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 춘계학술대회논문집
• /
• pp.43-50
• /
• 2009

In order to reduce the download around Smart UAV(SUAV) at hovering and transition mode, flow control using synthetic jet has been performed. Many of the complex tilt rotor flow features are captured including wing leading and trailing edge separation, and the large region of separated flow beneath the wing. First, in order to control the trailing edge separation, synthetic jet is located at 30, 95% of flap chord length. The flow control using synthetic jet on flap shows that stall characteristics depending on several mode can be improved through separation vortices resizing. Also, a flap jet and a 0.01c jet which control the separation efficiently are applied at the same time at each test case because controlling the leading edge separation is essential for download reduction. As a result, time averaged download is reduced about 18% comparing with no control case at hovering mode and 48% at transition mode. These research results show that if flow control using leading edge jet and trailing edge jet is used effectively to the SUAV in overall flight mode, flight performance and stability can be improved.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 추계학술대회
• /
• pp.1010-1013
• /
• 2009

농촌의 청년들이 대도시로 대거 진출하여 농촌에 남아 생산에 종사하는 인력의 대부분이 노년층이 되어 온 것이 오래전부터의 일이다. 이들 노년층에게 있어서 가축에게 사료를 주는 일보다는 오히려 축사의 배설물을 치우는 일이 힘겨운 일이기 때문에 무엇보다 이부분의 자동화가 필요하다고 본다. 따라서 우리는 가축들의 폐사를 줄이기 위하여 축사의 배설물을 청소할 수 있고 혹한기와 혹서기 때 급격한 온도변화에 빠르게 대응할 수 있는 자동화시스템을 개발해 왔다. 시스템의 동작 환경을 원격지에서 모니터링 하기위하여 CCD 카메라를 이용하여 실시간으로 감시할 수 있는 시스템도 제안하였다. 본 논문에서는 이동 중에 축사 자동화 시스템을 제어할 수 있도록 PDA를 이용한 원격제어 시스템을 제안하였다. 제안 시스템은 사용자가 이동하고 있는 동안에 PDA 화면을 이용하여 제어 및 모니터링이 가능하도록 구현하였다. 또한 화재 및 외부로부터의 침입이 있을 경우 경고를 보내 도난을 방지하기 위한 보안시스템도 추가하였으며 도난 및 화재 등 비상시에 상황을 실시간으로 모바일을 이용하여 문자전송을 받을 수 있도록 구현하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제31권11호
• /
• pp.1828-1832
• /
• 2018

Objective: Environmental change is one of the stressful events in livestock production. Change in environment disturbs cow behavior and cows require several days to regain a stable behavioral pattern. Sleeping posture (SP) and lying posture (LP) have been used as indicators for animal that are relaxed and well-acclimated to their environment. The aim of this study was to examine the time required by Japanese black cows for stabilization of SP and LP after moving into new environment. Methods: Seven pregnant Japanese black cows were used. Cows were moved into new tie-stall shed and their sleeping and lying posture measured 17 times during 35 experimental days. Both SP and LP were detected by accelerometer fixed on middle occipital and hip-cross, respectively. Daily total time, frequency, and average bout of both SP and LP were calculated. Results: Daily SP time was the shortest on day 1 and increased to the highest on day 3. It then decreased until day 9, after that stabilized about 65 min/d till the end of experiment. Daily LP time changed in same manner as daily SP time. The average SP bout was the longest on day 1, and then decreased to stable level on day 7. On the other hand, the average LP bout was the shortest on day 1, and it increased to stable level on day 7. Conclusion: These results showed that pregnant Japanese black cows needed 1 week to stabilize their SP. However, there were different change patterns between the average SP and LP bout, even though the change pattern of daily SP and LP time were similar.

• 대한수의학회지
• /
• 제14권2호
• /
• pp.273-279
• /
• 1974

Studies were made on the relation of mastitis infection rate to the management and sanitations of dairy farms by examining 46 dairy herds. The results obtained were as follows: 1. The higher infection rate was observed in farms managed by employees than by owners, and in impoprted cattle than cattle horn in Korea. 2. Type of education and the period of experience of management were not correlated to the infection rate. 3. The infection rate was the highest in Summer and in cattle of 5~8 lactating age group. 4. It was observed that the amount of water supply, time of cleaning stall, frequency of disinfection, the method of using cleaning towel and the method of milking were correlated to the infection rate.

• 대한조선학회논문집
• /
• 제44권1호
• /
• pp.8-15
• /
• 2007

In this paper, numerical calculations are performed to analyze the unsteady flow of NACA airfoil sections. In order to ease the flow computation for the fluid region changing in time, improve the quality of solution and simplify the grid generation for the oscillating foil flow, the computational method adopts a moving and deforming mesh with the multi-block grid topology. The multi-block, structured-unstructured hybrid grid is generated using the commercial meshing software Gridgen V15. The MDM (Moving & Deforming Mesh) and the UDF (User Define function) function of FLUENT 6 are adopted for computing turbulent flows of the foil in pitching motion. Computed unsteady lift and drag forces are compared with experimental data. in general, the characteristics of unsteady lift and drag of the experiments are reproduced well in the numerical analysis.

• 대한기계학회논문집B
• /
• 제33권2호
• /
• pp.141-148
• /
• 2009

Axial-flow compressor is one of the most important parts of gas turbine units with axial turbine and combustor. Therefore, precise prediction of performance is very important for development of new compressor or modification of existing one. Meanline analysis is a simple, fast and powerful method for performance prediction of axial-flow compressors with different geometries. So, Meanline analysis is frequently used in preliminary design stage and performance analysis for given geometry data. Much correlations for meanline analysis have been developed theoretically and experimentally for estimating various types of losses and flow deviation angle for long time. In present study, meanline analysis program was developed to estimate compressor losses, incidence angles, deviation angles, stall and surge conditions with many correlations. Performance prediction of one stage axial compressors is conducted with this meanline analysis program. The comparison between experimental and numerical results show a good agreement. This meanline analysis program can be used for various types of single stage axial-flow compressors with different geometries, as well as multistage axial-flow compressors.

• International Journal of Aeronautical and Space Sciences
• /
• 제8권2호
• /
• pp.28-36
• /
• 2007

A multi-objective design exploration for a three-element airfoil consisted of a slat, a main wing, and a flap was carried out. The lift curve improvement is important to design high-lift system, thus design has to be performed with considered multi-angle. The objective functions considered here are to maximize the lift coefficient at landing and near stall conditions simultaneously. Kriging surrogate model which was constructed based on several sample designs is introduced. The solution space was explored based on the maximization of Expected Improvement (EI) value corresponding to objective functions on the Krigingmodels. The improvement of the model and the exploration of the optimum can be advanced at the same time by maximizing EI value. In this study, a total of 90 sample points are evaluated using the Reynolds averaged Navier-Stokes simulation(RANS) for the construction of the Kriging model. In order to obtain the information of the design space, two data mining techniques are applied to design result. One is functional Analysis of Variance(ANOVA) which can show quantitative information and the other is Self-Organizing Map(SOM) which can show qualitative information.

• 대한기계학회논문집B
• /
• 제25권10호
• /
• pp.1384-1391
• /
• 2001

Three-dimensional flow analysis is implemented to investigate the flow through transonic axial-flow compressor rotor(NASA R67) and to evaluate the performances of Abid's low-Reynolds-number k-$\omega$ and Baldwin-Lomax turbulence models. A finite volume method is used fur spatial discretization. The equations are solved implicitly in time by the use of approximate factorization. The upwind difference scheme is used for inviscid terms and viscous terms are approximated with central difference. The flux-difference-splitting method of Roe is used to obtain fluxes at the cell faces. Numerical analysis is performed near peak efficiency and near stall. The results are compared with the experimental data for NASA R67 rotor. Blade-to-Blade Mach number distributions are compared to confirm the accuracy of the code. From the results, it is concluded that Abid'k-$\omega$ model is better for the calculation of flow rate and efficiency than Baldwin-Lomax model. But, the predictions for Mach number and shock structure are almost the same.

• 한국농촌건축학회논문집
• /
• 제16권3호
• /
• pp.45-52
• /
• 2014

Recently, Korean people are more interested in leisure time as the Korean economy has enjoyed the economic growth on a continual basis. Along with it, the disabled people's demand for enjoying the beach is growing. To meet the disabled people's demand for enjoy the beaches, it is important to prepare the convenient facilities where the disabled people in the wheel chair can use comfortably, including the handicapped parking area, toilet for the disabled, shower stall room and am bathhouse. On the backdrop of this, the study has been made on the obstacles which keep the disabled people from using the convenient facilities installed on 12 beaches in the southern coat of Korea from the perspective of barrier free design. This study showed that half of the beaches in question did not have the handicapped parking places. The parking space was also so narrow that it was difficult for handicapped people to access the parking lot with their vehicles. There were also 3 beaches which did not have the toilet for the disabled. Even the beaches which have the toilet for the disabled, the size of entrance door and floor space was so narrow and there were a lot of physical obstacles such as no handles for the disabled people that it was really hard for the disabled people in wheelchair to use them.