• 한국연소학회:학술대회논문집
• /
• 2000.12a
• /
• pp.168-174
• /
• 2000

A diode laser sensor system based on absorption spectroscopy techniques has been developed to measure $CO_2$ concentration and temperature non-intrusively in high temperature combustion environments using a 2.0 ${\mu}m$ DFB(Distributed Feedback) laser. Two optics was fabricated in pig-tail fashion and all optical components were implemented in a single box. The evolution of measurement sensitivity was done using test cell by changing sweep frequency and $CO_2$ concentration. Gas temperature was determined from the ratio of integrated line strengths. Species concentration was determined from the integrated line intensity and the measured temperature. The result show that the system has 2% error in wide operation frequency range and accuracy of $CO_2$ concentration was about 3%. The system was applied to measure temperature and concentration in the combustion region of a premixed $CH_4$ +air triangular flame. The measurement results of gas temperature agreed well with thermocouple results. Many considerations were taken into account to reduce optical noise, etalon effect, beam steering and base line matching problem. The evaluations results and actual combustion measurement demonstrate the practical and applicability for in-situ and real time combustion monitoring in a practical system.

• Journal of the Optical Society of Korea
• /
• v.12 no.3
• /
• pp.170-173
• /
• 2008

In this study, we simulated a statistical model of FCS(fluorescence correlation spectroscopy) based on a Poisson process to understand and explain observations of the experiment performed on molecules of ultra-low concentration by the home-built laser-scanning confocal microscope. The statistical model confirmed that the relative mean square amplitude of fluctuations is shown to be inversely proportional to the average number of molecules, even in the ultra-low concentration, if some conditions are satisfied. Signal-to-noise ratio and the variability of dwelling time under the confocal volume were found to be effective conditions for the experiment.

• Korean Journal of Materials Research
• /
• v.13 no.5
• /
• pp.328-332
• /
• 2003

Characteristics of $TiO_2$nanoparticles controlled by precursor flow rate and reaction temperature in chemical vapor condensation process were interpreted in the view of decisive reaction factors, i.e. supersaturation ratio, concentration of vapor molecule, collision frequency and rate, and residence time, which directly affect the particle size and size distribution in CVC reactor. As results, the increases of precursor flow rate and reaction temperature induced the increase in the average sizes of $TiO_2$ nanoparticles in CVC reactor by acceleration of coagulation growth due to the increase of collision between $TiO_2$vapor molecules and particles. The effects of reaction factors on the characteristics of$TiO_2$nanoparticles were discussed with considering particle formation process in CVC reactor under given process parameters.

• Journal of Nutrition and Health
• /
• v.31 no.7
• /
• pp.1130-1138
• /
• 1998

The objective of this study was to investigate the relationship between changes in body temperature, adiposity and sympathoadrenal activity in normal weight female college students, eating an instant-noodle lunch in a laboratory setting at ambient temperatures of 22-24.8$^{\circ}C$. Preprandial epinephrine(EPI) concentration, as an indicator of adrenal activity, was inversely and significantly correlated with body weight, body mass index(BMI), and waist girth. Changes in pre- and postprandial EPI concentrations showed positive correlations with % body fat, fat mass, waist girth, hip girth, and waist/hip girth ratio(WHR). The preprandial norepinephrine (NE) concentration was negatively correlated with recovery time from the peak postprandial core temperature to the meal-start core temperature(RTST). However, the NE concentration, an indicator of sympathetic neural activity, was not related to anthropometric measurements in normal weight young women. In conclusion, adrenal activity was negatively associated with adiposity and central body fat distribution. Sympathetic activity was related to body temperature regulation capacity after a meal, but was not related to adiposity in normal weight young women. (Korean J Nutrition 31(7) 1130-1138, 1998)

• The Korean Journal of Physiology
• /
• v.8 no.1
• /
• pp.7-14
• /
• 1974

This study was carried out to investigate the acute changes in R-A-A system following lasix administration, and to evaluate the materials in plasma R-A-A system and electrolytic excretion every 30 minutes for 2 hours after lasix administration with normal high sodium Korean food, moderate sodium restriction, and severe sodium restriction, and it was concluded as followed; 1. Plasma renin activity, angiotensin II concentration, and aldosterone concentration elevated in course of time after lasix administration with high sodium Korean food, but the R-A-A system takes insignificant part because of the increasing rate was so slight. 2. Although the increasing rate of plasma renin activity reached lower levels, angiotensin II and aldosterone concentration were significantly increased after lasix administration with moderate sodium restriction. 3. It was observed that higher rise in aldosterone concentration following lasix administration during severe sodium restriction than when moderate sodium restriction. 4. Urinary sodium and potassium excretion during two hours after lasix administration showed decrease as little as the amount of sodium intake, but K/Na excretion ratio showed increase with small amount of sodium intake because of the decreasing rate of potassium was low value. 5. Sodium excretion after lasix administration reached more than 1.5 times of sodium intake, even though R-A-A reaction showed significantly. 6. As our results showed, R-A-A reaction following acute diuresis was insignificant with high sodium Intake, the increasing ratio of aldosterone concentration showed high rise compare with of plasma renin activity as little as the amount of sodium intake, and the participated rate in sodium reabsorption of R-A-A system was increased.

• Analytical Science and Technology
• /
• v.36 no.4
• /
• pp.170-179
• /
• 2023

Starvation, diabetes, alcoholism and hypothermia cause ketoacidosis in the human body; therefore, the cause of death can be determined by analyzing ketone bodies in the blood of the deceased. In the case of decomposition of the cadaver, however, since collecting intact blood is impossible, ketone body analysis is performed using the spleen. However, the index for diagnosing ketoacidosis is based on blood concentration, and its correlation with ketone bodies present in the spleen remains unknown. In particular, since decomposition proceeds rapidly during summer, when temperature and humidity are high, understanding the correlation between ketone bodies in the blood and spleen is important to estimate the state at the time of death from a decaying body. Therefore, in the present study, the correlation between ketone bodies in the blood and spleen of the deceased was explored. Ketone bodies (beta-hydroxybutyric acid [BHB] and acetone) in the blood and spleen were analyzed and compared from autopsies (>100 mg·L^-1 BHB, blood basis) conducted at the Daejeon Forensic Research Institute from June to December 2021. Moreover, the concentration of ketone bodies in the spleen juice and tissues was compared assuming the scenario of extreme decomposition. Ketone retention concentration in the blood and spleen was positively correlated, and the ratio of BHB concentration in the spleen to BHB concentration in the blood ranged from 0.52 to 1.08 (mean = 0.85 ± 0.12), although the ratio may vary depending on the degree of decomposition of the corpse.

• Korean Journal of Clinical Pharmacy
• /
• v.16 no.1
• /
• pp.57-62
• /
• 2006

The purpose of this study was to investigate the effect of naringenin, one of flavonoids, on the pharmacokinetics and bioavailability of diltiazem (15 mg/kg) after oral administration of diltiazem with or without naringenin (2.0, 10 and 20 mg/kg) in rabbits. Coadministration of naringenin increased the absorption rate constant $(K_a)$, the area under the plasma concentration-time curve (AUC) and peak concentration $(C_{max})$ of diltiazem compared to the control group, but only significantly (p<0.05) by 10mg/kg of naringenin coadministration. The absolute bioavailability (AB%) of diltiazem by coadministration ranges from 7.8% to 10.3%, increased more than control (7.2%), and relative bioavailability (RB%) of diltiazem is increased from 1.08- to 1.43-fold. Coadministration caused on significant changes in the terminal half-lives $(t_{1/2})$ and the time to reach the peak concentration $(T_{max})$ of diltiazem. On the other hand, coadministration of naringenin increased the AUC desacetyldiltiazem, significantly at the dose of 10mg/kg. But the metabolite ratio (MR) was decreased, significantly at 10mg/kg of naringenin. Based on these results, we can make a conclusion that the increased bioavailability and the significant changes of these pharmacokinetic parameters might be due to naringenin, which possess the potency to inhibit the metabolizing enzyme (CYP3A4) in the liver and intestinal mucosa, and also inhibit the P-glycoprotein efflux pump in the intestinal mucosa.

• Korean Journal of Veterinary Research
• /
• v.53 no.2
• /
• pp.77-82
• /
• 2013

The present study was planned to evaluate the bioequivalence of two commercial formulations of enrofloxacin, which have been marketed as 10% injectable solution after intramuscular administration at a single dose of 2.5 mg/kg body weight to 12 clinically healthy goats The study was carried out on the basis of crossover design. The two formulations were: Baytril as a reference product and Spectrama Vet as a test product. The plasma concentrations of enrofloxacin were measured by high performance liquid chromatography (HPLC) with UV detector. The pharmacokinetics of that data was performed using non-compartmental analysis. The maximum plasma concentration ($C_{max}$), time to reach peak concentration ($T_{max}$), area under concentration-time curve (AUC), elimination half-life ($t_{0.5el}$) were 1.14 and $1.05{\mu}g/mL$, 0.79 and 0.83 h, 5.70 and $5.79{\mu}g.h/mL$, 5.19 and 5.39 h for Baytril and Spectrama Vet, respectively. The 90% confidence interval for the mean ratio of $T_{max}$, $C_{max}$ and AUC were 94.72-116.2, 87.88-97.16 and 86.44-118.72%, respectively. These values falls within the European Medicines Agency bioequivalence acceptance range of 80-125% for both $T_{max}$ and AUC and between 75-133% for $C_{max}$. In conclusion, Spectrama-Vet is bioequivalent to Baytril and both products can be used as interchangeable drug in veterinary medicine practice.

• Microbiology and Biotechnology Letters
• /
• v.10 no.1
• /
• pp.45-52
• /
• 1982

A fungus with the highest protopectinase productivity was selected among 205 strains isolated from the soil and identified as a Verticillium sp. The Verticillium sp. was cultivated on wheat bran and the crude extruct of its culture medium showed the highest protopectinase activity on the following conditions: 3 days of cultivation time, 27$^{\circ}C$ of cultivation temperature, 1.2 $m\ell$/g wheat bran of water content, and reinforcement of ammonium nitrate and calcium chloride at the concentration of 0.5 and 0.02%, respectively. The optimum conditions for pectin production from Citrus peel pulp by the protopectinase were consequently obtained as follows: 20$m\ell$/g of liquid volume-to-pulp weight ratio, 4$0^{\circ}C$ of reaction temperature, and 4 of reaction pH. The higher the enzyme concentration, the better the yield of pectin and the shorter the reaction time. Total 45.6mg of pectin/g peel was produced by 1 hour reaction at the enzyme concentration of 10.5 units/$m\ell$. Molecular weight of the pectin produced by the enzyme was estimated to be about 62,000 by Smit and Bryant's method.

• Journal of Hydrogen and New Energy
• /
• v.3 no.2
• /
• pp.17-24
• /
• 1992

Hydrogen gas sensors were fabricated after the form of metal/insulator/semiconductor(MIS) structure on a p-type silicon wafer and a insulating layer (silicon dioxide) thickness was changed from $500{\AA}$ to $5000{\AA}$. Their electrical properties were investigated with the variation of the hydrogen gas concentration at room temperature. At the applied forward bias of lV to both ends of Pd-MIS sensors the current was decreased logarithmically with the increase of hydrogen concentration in air. In the case of a thin $SiO_2$ layered ($500{\AA}$) sensor the current ratio was decreased to 25 % at 1 % of hydrogen concentration in air and 50% for a thick $SiO_2$ layered ($5000{\AA}$) sensor. And the response time of the thick insulating layered sensor to 1% hydrogen containing air was about 50 seconds and regeneration time was 2.5 minutes. When a 0.5mA current was appied to the thick insulating layered sensor the maximun voltage shift was calculated to 0.8V in the case of ${\theta}$ = 1 and the Pd surface coverage of hydrogen was increased logarithmically with hydrogen partial pressure.