• 한국환경농학회지
• /
• 제32권3호
• /
• pp.214-223
• /
• 2013

Dichlorprop(DCPP)는 phenoxyalkanoic acid계열로서 인체에 유해한 것으로 알려진 fenoprop, 2,4-D 및 daminozide의 대체 약제로 사용되어온 auxin 활성 생장조정제로 과수의 낙과 방지에 이용된다. 하지만, DCPP의 과다 사용은 과실의 숙기를 촉진시키며 연화 및 저장력을 현저히 저하하는 부정적인 영향을 나타내며, 제초제의 특성을 나타내기 때문에 농산물에 과다 사용하여 잔류허용기준을 초과할 경우, 인체에 유해할 수 있다. 따라서 본 연구는 생장조정제로 사용되고 있는 DCPP에 대하여 국내에 유통되는 농산물을 대상으로 잔류 실태 조사 연구를 실시하고자 기존 식품공전 분석법을 개선하여 신속하고 효율적인 분석법으로 재확립 하였다. 분석법 검증에 사용된 시료는 농산물의 메트릭스를 대표할 수 있는 농산물 5종(감귤, 감자, 고추, 대두 및 현미)을 사용하였다. 검체에 아세톤을 가하고 산성화시켜 추출한 후 산-염기 액-액 분배법을 이용해 추출, 정제 및 농축 과정을 거쳤다. 농축에 의해 얻어진 잔류물은 메탄올로 재용해한 후, 이중 2 mL를 취해 $BF_3$-메탄올 용액으로 메틸화한 후, 헥산 및 5% 염화나트륨을 사용해 최종 정제를 거친 용액을 헥산으로 재용해하여 GC/ECD에 주입하였다. 기기분석은 DB-17 중간 극성 칼럼과 운반 기체로 질소 가스를 사용하였고, split-less 모드 하에 $1{\mu}L$를 주입하여 승온 조건으로 ECD에 의해 측정하였다. 또한, GC/MS를 통해 확인시험을 수행 하였으며, 모든 검증은 CAC 가이드라인(CAC/GL 40, 1993) 규정에 따라 실시하였다. 그 결과, DCPP의 정량 한계는 모든 검체에서 0.05 mg/kg 수준이었고, 회수율은 감귤89.5-94.3%, 감자 79.4-87.4%, 고추 90.5-102.2%, 대두 78.8-101.1%, 현미 90.5-100.4%였으며, 변동계수는 감귤 2.5-9.5%, 감자 1.4-2.6%, 고추 2.7-3.9%, 대두 3.4-7.3%, 현 미 1.2-2.1%로 나타났다. 이상의 결과는 국제식품규격위원회 가이드라인 규정(CAC/GL 40, 1993)에 만족하는 수준으로, 새롭게 개선된 DCPP 분석법은 향후 국내 유통 농산물을 대상으로 한 생장조정제 DCPP의 잔류 실태 조사 연구에 활용될 계획이다.

• 핵의학기술
• /
• 제17권2호
• /
• pp.84-89
• /
• 2013

PET-CT (Positron Emission Tomography-Computed Tomography)의 융합영상(Fusion image)에서 긴 영상 획득 시간에 의한 환자의 움직임은 융합영상에서 부적합한 결과로 나타나 영상의 질과 진단에 큰 영향을 준다. 의료장비 회사에서 제공하는 팔 지지대는 환자 자세에서의 편의성과 안전성을 고려하지 않아 PET/CT를 검사하는 동안 팔과 머리의 움직임 때문에 뇌기저부의 영상 결손이 생기고 머리의 좌우, 상하 움직임으로 인하여 재촬영이 빈번하다. 이에 우리는 두경부와 팔의 움직임을 최소화할 수 있는 환자보정기구를 개발하여 PET/CT 촬영 시 환자에게 편의성과 안전성을 제공하고 환자의 움직임으로 인한 재촬영을 줄이고자 한다. 2012년 6월부터 7월까지 PET Torso 검사를 위해 핵의학과에 내원하는 환자들 중 움직임에 불편함이 전혀 없는 환자 20명과 어깨 통증으로 팔을 올리기가 불편한 환자 20명을 대상으로 Patient Holding System (PHS)와 팔의 경사도($25^{\circ}$, $27^{\circ}$, $29^{\circ}$, $31^{\circ}$, $33^{\circ}$, $35^{\circ}$)를 변화시켜 가장 편안한 자세와 경사도를 선정 하였다. 또한 지지대 재질의 투과성에 대하여 유관업체의 검증을 하였고, 환자의 머리와 팔을 밴드(벨크로 형태)로 고정하여 이에 대한 편의성을 질의하였다. 그리고 움직임에 의한 재촬영 빈도를 알아보기 위해 2012년 1월부터 12월까지 PET Torso를 시행한 환자들 중 환자보정기구 사용 전/후 재촬영 여부를 분석하였다. 움직임에 불편이 전혀 없는 환자에서는 18명이 PHS와 팔의 각도가 $29^{\circ}$에서 가장 편안함을 느낀다고 답하였으며, 2명은 각각 $27^{\circ}$, $31^{\circ}$이라고 답하였다. 어깨 통증을 느끼는 환자에서는 15명이 $31^{\circ}$에서 가장 편안함을 느낀다고 답하였고, $33^{\circ}$에서 2명, $35^{\circ}$에서 3명이었다. 이를 위해 손잡이 부분이 상, 하 움직임이 가능하도록 제작하였다. 환자보정기구 재질의 투과성은 검증된 상태이며, 환자보정기구 자체의 움직임을 방지하기 위하여 PHS와 보정기구를 밴드(벨크로 형태)로 고정시켰다. 두경부의 움직임을 최소화할 수 있는 홈을 만들고 머리를 고정할 수 있게 고정밴드를 부착 하였고, 손목 및 전완과 상완의 움직임을 제한할 수 있는 고정밴드를 부착하여 팔의 흔들림으로 인한 움직임을 최소화 하였다. PET Torso 촬영 시 움직임에 의한 재촬영 빈도는 환자고정기구 사용 전 10.56% (191건/1,808명), 사용 후 2.77% (48 건/1,732명)로 7.79%의 발생 빈도를 줄일 수 있었다. 최근 의료 환경의 변화와 혁신으로 고가의 영상검사가 늘어남에 따라 고객이 요구하는 차별화된 서비스 제공은 필수적이다. 따라서 PET/CT를 검사하는 동안 환자의 편안함과 안전성을 확보하기 위해 인체공학적인 환자보정기구를 제공하여야 한다. 따라서 본 연구를 통해 PET Torso 검사 시 환자의 체형과 상황에 따라 인체공학적 경사도를 상, 하 조절할 수 있는 환자보정기구를 제작하였으며, 팔의 움직임에 의한 뇌기저부의 영상결손을 줄이고 머리의 움직임으로 인한 재촬영을 줄일 수 있었다.

• 항공우주정책ㆍ법학회지
• /
• 제28권1호
• /
• pp.115-157
• /
• 2013

시카고협약 일부 체약국은 자국 항공사에게 AOC(AOC and Operations Specifications)을 승인하여 발행하는 것 이외에 외국 항공사에게도 FAOC(Foreign AOC and Operations Specifications)을 발행하고 있으며 다양한 항공안전평가도 실시하고 있다. 외국 항공사에게 FAOC 승인 발행 및 항공안전평가 실시는 점차 확대되고 있는 추세로 전 세계적으로 항공안전 증진 및 항공기 사고율 감소에 기여한 공로가 크다고 볼 수 있으나, 한편으로는 승인 및 지적사항에 대한 적법성 논란 및 행정 편의를 표방하는 대표적 사례라는 지탄과 함께 감독 당국의 업무수행 능력 차이로 인하여 항공기 운항 상 불편이 초래되고 있다. 항공기 사고방지 및 효율적인 항공기 운항을 위하여 항공 안전 확보는 가장 중요한 요소 중의 하나로 타협할 수 있는 사항이 아니며, 따라서 국제항공사회는 ICAO에서 시카고협약부속서 19 Safety Management를 별도로 제정하여 2013년 말부터 적용하도록 하였다. 국제 항공 질서 확립 및 항공 안전 확보를 위하여 시카고협약 및 부속서는 체약국의 의무 및 '국제표준 및 권고방식(SARPs, Standards and Recommended Practices)'을 규정하고 있으며 각 체약국은 SARPs에 합당한 이행의무를 준수해야 한다. 이와 관련하여 각 체약국은 항공사의 안전운항체계를 확인하고 AOC를 승인하여 발행하며 지속적으로 관리감독 업무를 수행하고 있다. 이러한 AOC 승인 발행에 대한 ICAO 국제 표준은 체약국의 항공당국이 자국의 항공사를 대상으로 허가 및 교부하는 것으로 체약국을 운항하는 외국의 항공사에게까지 발급하도록 규정하고 있지 않으나 미국, 중국, 호주, 뉴질랜드, 몽골 등 일부 체약국은 자국 내 항공사에게 AOC 발행 뿐 아니라 외국의 항공사에게도 AOC(FAOC)를 인가하여 교부하고 있으며 이는 EASA 등으로 확대되고 있는 실정이다. AOC나 FAOC 이외에도 ICAO와 IATA는 항공당국 및 항공사 전반에 대한 항공안전평가가 있으며, 미국 및 유럽도 자국 및 회원국 등을 운항하는 외국 항공 당국 및 항공사에 대한 항공안전평가를 별도로 실시하고 그 평가 결과를 공표하면서 항공 안전 불합격으로 평가된 국가나 항공사에게는 운항 제한 등 불이익을 주고 있다. 이와 관련하여 본 논문에서는 AOC, FAOC 및 항공안전평가제도의 법적 근거 및 동향을 고찰하고 조종사비행기록부 탑재여부 등에 대한 국제 사례연구를 통하여 몇 가지 제언과 개선방안을 제시하였다. 본 논문이 현 제도의 미흡한 부분을 보완하고 불합리한 제한기준이 개선되는데 도움을 주고, 아울러 국제 표준 준수 및 항공안전 발전에 기여하길 기대한다. 항공법규 관련 합리적인 기준 수립 및 이행에 있어 가장 중요한 요소 중 하나는 시카고협약 및 SARPs에 대한 철저한 이해가 선행되어야 한다는 것이다. 법규 제정자, 연구기관, 전문가, 운영자 등 모든 관계자들의 긴밀한 협조 하에 기준 수립이 이루어질 때 항공법규 수립 및 이행에 대한 보다 실질적인 개선 및 질적 향상을 기대할 수 있을 것이다.

• Tuberculosis and Respiratory Diseases
• /
• 제44권6호
• /
• pp.1318-1325
• /
• 1997

연구배경 : 일정한 분시 유지하면서도 기도압의 하나인 압력조절용적조정양식(PRVC)의 입상적 유용성에 대한 보고는 없었다. 본 연구는 호흡역학이 불안정한 환자에서 PRVC 양식이 원래의 개발 목적대로 압력 조절 양식에 비해 일호흡량을 일정하게 유지하면서 용적조절양식에 비해 기도압을 낮게 유지하는지를 관찰하였다. 연구방법 : 기계 호흡 중이며 활력징후의 안정을 보이는 환자 중 15분간 관찰 결과 VCV에서 최고 홉기압의 변이계수가 10이상으로 최고 홉기압의 변화가 심하거나, PCV에서 상시 호흡량의 변이계수가 10이상으로 일 호흡량의 변화가 심한 환자 8 명(남 : 녀=6 : 2, $56{\pm}26$세)를 대상으로 하여 일호흡량을 비슷한 유지하도록 VCV, PCV, PRVC 양식을 설정한 후 각 환기양식에서 15분간 일호흡량과 최고 흡기압을 관찰하였다. 결 과 : 1) 평균 일호흡량은 VCV에서 $431{\pm}102ml$, PCV에서 $417{\pm}99ml$, PRVC에서 $414{\pm}97ml$였으며 각 환기양식 간에 차이가 없었다. 2) 상시 호흡량의 변이계수는 VCV에서 $5.2{\pm}3.9%$, PCV에서 $15.2{\pm}7.5%$ PRVC에서 $19.3{\pm}10.0%$로 PCV와 PRVC에서 상시 호흡량의 변화가 심하였다(p<0.01). 3) 평균 최고 홉기압은 VCV에서 $31.0{\pm}6.9cm$ $H_2O$, PCV에서 $26.0{\pm}6.5cm$ $H_2O$, PRVC에서 $27.0{\pm}6.4cm$ $H_2O$로 PCV와 PRVC의 최고 흡기압의 VCV의 경우보다 낮게 유지되었다(p<0.01). 4) 최고 홉기압의 변이계수는 VCV에서 $13.9{\pm}3.7%$, PCV에서 $4.9{\pm}2.6%$, PRVC에서 $12.2{\pm}7.0%$로 VCV와 PRVC에서 최고 홉기압의 변동이 심하였다(p<0.01). 결 론 : PRVC 양식은 호흡역학이 불안정한 환자에서는 VCV에 비해 평균 최고 홉기압은 낮게 유지하였으나 최고 흡기압의 변동이 심하였고, PCV에 비해 상시 호흡량의 변동이 심하여 이중조절환기양식 본래의 목적을 달성하기 어려울 것으로 사료된다.

• 지능정보연구
• /
• 제19권3호
• /
• pp.25-44
• /
• 2013

최근 IPTV와 스마트 TV 등의 등장과 영상 콘텐츠를 시청하고 검색할 수 있는 웹 서비스의 등장으로 영상 콘텐츠의 접근이 용이해져 사용자들은 자신이 원하는 콘텐츠를 찾고자 하는 요구가 증가하고 있다. 하지만 서비스되는 콘텐츠의 양이 방대하여 영상 콘텐츠를 검색할 때 사용하는 키워드 기반의 검색은 많은 양의 결과를 가져오며 사용자가 필요로 하지 않은 결과가 검색된다. 따라서 사용자가 원하는 콘텐츠의 검색 시간과 노력이 증가 하게 되었다. 이를 극복 하기 위해 콘텐츠 추천 및 검색에 대한 연구가 수행되어 왔다. 기존의 연구에는 사용자의 선호도 분석을 통하여 영상 콘텐츠를 추천하거나 비슷한 성향을 가지는 사용자들을 분류하여 콘텐츠를 추천하는 기법들이 연구되어 왔다. 본 논문에서는 영상 콘텐츠 중 영화의 추천을 위해 사용자 개인의 영화 메타데이터의 선호도를 분석하고, 영화의 메타데이터와 영화의 유사성을 도출하여 이를 기반으로 영화 추천 기법을 제안한다. 영화의 특징을 담고 있고, 사용자의 영화 선호도에 영향을 끼치는 장르, 줄거리, 배우, 키워드 등의 영화 메타데이터를 기반으로 온톨로지를 구축하고, 확률 기법을 통한 메타 데이터간의 유사성을 분석하여 유사 메타데이터를 연결한다. 또한 사용자의 선호도와 그룹을 정의하고, 사용자 정보를 활용하기 위한 사용자 모델을 정의한다. 제안하는 추천 기법은 1) 사용자 정보기반의 후보 영화 검색 컴포넌트, 2) 사용자 선호기반의 후보 영화 검색 컴포넌트, 3) 1)과 2)의 결과를 통합하고 가중치를 부여하는 컴포넌트, 4) 최종결과의 분석을 통한 개인화된 영화 추천 컴포넌트 등 총 4가지 컴포넌트로 구성된다. 제안하는 추천 기법의 실험을 위하여 20대 남/녀 10명씩 20명을 대상으로 실험을 진행하였으며, 실험결과 평균 Top-5에서 2.1개 Top-10에서 3.35개 Top-20에서 6.35의 영화가 보고 싶은 영화로 선택되었다. 본 논문에서는 영화 메타데이터간의 연관성 도출을 통하여 영화간의 유사성을 도출하고 이를 기반으로 사용자의 기본적인 정보를 활용한 추천뿐만 아니라 사용자가 예상하지 못한 영화의 추천이 가능하다.

• 벤처혁신연구
• /
• 제5권3호
• /
• pp.57-70
• /
• 2022

현대의 산업자본주의는 근로의 제공과 임금의 수령이라는 관계가 사회를 규율하는 중요한 원리로 자리 잡고 있다. 근로계약에 따라 자신의 노동력에 대한 처분권을 사용자에게 맡기고 제공받는 임금은 직접적인 보상이 되고 있으며, 적절한 휴식의 보장으로 인간다운 삶의 보장과 재생산을 할 수 있어야 한다. 자유계약에 의한 근로관계의 구축은 근로자 보호에 문제점을 나타내고 있으며, 이에 따라 근로자에 대한 최소한의 권리로 근로시간의 최대치를 정하고 최소휴식의 기준을 설정·부여하고 있다. 근로시간의 단축은 근로자의 삶의 질이라는 측면에서 매우 중요하지만 효율적인 기업활동에 있어서도 중요한 문제이다. 우리나라는 2020년 기준 연간 근로시간이 1,908시간으로 장시간 근로를 하고 있으며, UN산하 자문기구인 지속가능발전해법네트워크(SDSN)가 조사한 행복지수에서 OECD 37개국 중에서 하위 3번째로 나타나고 있다. 이에 따라 근로시간 단축의 필요성은 인정되어, 2018년부터 1주의 최대 근로시간이 52시간으로 제한하고 있다. 이러한 상황에서 기업의 부가가치 창출력을 유지하고, 근로자의 다양한 니즈에 부응하기 위한 방안으로 법적으로 다양한 근로시간의 예외를 두고 있으며, 우리나라 근로기준법은 3개월 이내의 탄력적 근로시간제와 3개월을 초과하는 탄력적 근로시간제, 선택적 근로시간제와 근로시간의 연장을 허용하는 연장근로의 제한을 두어 이를 허용하고 있다. 하지만 2021년 개정된 탄력적 근로시간제를 적용하는 것과 최근 논의되고 있는 정산 단위기간의 확대에 대한 논의에서 탄력적 근로시간제의 문제점이 있어 이에 대한 개선이 필요하다. 따라서 본 논문은 탄력적 근로시간제의 문제점과 이에 때한 개선방안을 살펴보고자 한다. 탄력적 근로시간제는 미리정한 기준에 따라 특정일 또는 특정주에 법정근로시간을 초과하더라도 근로기준법에서 정하고 있는 근로시간에 위배되는 것이 아님과 동시에 초과한 연장근로에 대한 가산임금을 지급하지 않아도 되는 제도로 주로 계절별 시기별 업무량 편차가 심한 제조업, 판매서비스업, 연속사업이나 장기간 조업을 위한 전기·가스·수도, 운수업 등에 있어 교대근무형태로 유용하게 활용되고 있으며, 운용에 따라 보다 짧은 근무일 설정을 통한 휴일 확대 등 근로시간 단축의 방편으로 활용되기도 한다. 하지만 정산 단위기간을 확대할 경우 근로자가 수령할 수 있는 가산임금을 수령하지 못하게 되어 근로자에게 불리하다. 따라서 첫째, 현재 논의되고 있는 정산 단위기간 확대를 하려면 현행 기준에서 확대되는 기간에 대하여 추가임금 지급을 하도록 하여야 한다. 둘째, 탄력적 근로시간제의 개별근로자에 대한 적용을 개선하여 근로자대표와의 서면합의에 있어 개별근로자와 충분한 협의를 하도록 하는 조치가 필요하고, 셋째, 정산 단위기간 동안 연장 근로의 허용시간을 명확히 하여야 하며, 넷째, 1일 최대근로시간이 정해지지 않고 있어 근로시간의 한도를 최대 근로시간으로 제한하거나 연속휴식에 대한 적용이 필요하며, 추가적으로 근로자대표의 서면합의가 탄력적 근로시간제의 적용에 있어 중요한 문제이므로 근로자대표의 대표성을 확보하여야 할 것이다.

• 마케팅과학연구
• /
• 제19권3호
• /
• pp.17-27
• /
• 2009

典型的价格促销是指降低一定数量产品的价格或以相同的价 格获得更多数量的产品, 从而增加价值和创造经济的激励购买. 价格促销经常用来鼓励没有消费过产品或服务的用户试用产品或服务. 因此, 理解价格促销对那些从来没有使用过促销品牌的消费者的此品牌质量认知的影响是很重要的. 然而, 如果消费者通过价格促销获得的产品的质量不好, 促销可能达不到用经济的刺激方法来增加销售的效果. 相反则有可能发生. 具体来说, 通过价格促销消费者产生低的质量的认知会削弱经济的和心理上的激励, 减少购买的可能性. 因此, 对市场营销人员来说理解品牌的价格促销信息如何影响消费者对此品牌的质量的不良认知是非常重要的. 先前的有关价格促销对质量认知的影响的研究有不一致的解释. 一些是关注价格促销对消费者认知的不利影响. 但是其他的研究显示价格促销并没有提高消费者对品牌的不良认知. 之前的研究发现这些不一致的结果和价格促销曝光的时机以及相关的试验得出的质量评估有关. 而且, 消费者是否经历过产品促销都可能会调节这些影响. 一些研究把产品类别的不同作为基本的因素. 本研究的目的是探讨在不同的情况下, 价格促销信息对消费者的不良的质量认知产生的影响. 作者控制了促销曝光的时机, 过去的各种促销形式以及信息发布的方式. 与以往的研究不同, 作者通过控制以前个人使用此产品的经验的潜在调节作用来测试事先设定限制的价格促销的影响. 这样的操作可以解决相关的有可能产生的争议. 这种方法对实际工作方面也是有意义的. 价格促销不仅适用于已存在的目标消费者, 而且可以鼓励没有使用过产品和服务的消费者尝试此产品或服务. 因此, 对市场营销人员来说理解品牌的价格促销信息如何影响消费者对此品牌的质量的不良认知是非常重要的. 如果没有使用过这个品牌的消费者通过价格促销获得的产品的质量不好, 促销可能达不到用经济的刺激方法来增加销售的效果. 相反则有可能发生. 另外, 如果价格促销结束, 购买了这个产品的消费者可能会出现明显的减少再购买行为. 通过文献回顾, 假设1用来探讨消费者通过过去的价格促销获得的质量认知的调节作用. 消费者对没有使用过的品牌的价格促销而产生的质量认知的影响会被此品牌过去的价格促销活动所调节. 换句话说, 消费者会对没有进行过价格促销的没有使用过的品牌产生不良的质量认知. 假设2-1:未使用过的品牌进行首次价格促销的时候, 价格促销的信息发布的方式将影响价格促销的成败. 假设2-2:消费者越不在意价格促销的原因, 越容易对产品的质量产生不良的认知. 通过测试1, 简要地解释了产品和品牌在提供四种价格促销形式之前并解释说明了每种价格促销形式. WAVEX这个虚拟品牌的质量的认知被评估为7. 网球拍被选中的原因是由于选定的产品组必须过去几乎没有价格促销活动来消除促销的平均次数对价格促销信息的影响, 正如Raghubir和Corfman(1999)所提出的. 测试2也用网球拍作为产品组, 主持测试2的管理者与测试1相同. 随着测试1, 选择了对产品组熟悉而对产品不熟悉的受访者. 每个受访者被分配到代表WAVEX价格促销的两种不同信息发布方式的两组中的一组. 在评估WAVEX的质量认知为7以前, 受访者看了每个促销信息. 不熟悉的实验品牌的价格促销对消费者的质量认知的影响被证明为会被以前有过或没有价格促销活动所调节. 与过去的促销行为一致是使品牌评估变得更糟的不良影响的重要变量. 如果此品牌从未进行过价格促销, 价格促销活动会对消费者的质量认知产生不良的影响. 第二, 不熟悉的品牌进行首次价格促销时, 促销信息的发布方式会影响公司促销的成败. 当消费者进行性格归因和情境归因的比较时, 质量认知的不良影响会更大. 与先前主要关注具有或不具有情境/性格归因中良好或不良的动机的研究不同, 本研究的焦点是检验如果公司提出了具有说服性的理由, 即使消费者在价格促销行为中有性格归因, 情境归因也可以被推断出的事实. 这种方法, 在学术方面取得了很大的成果, 意义在于它运用非数学的问题来解释固定和调整过程而不像以前的研究大部分是把它用于数学问题来解释. 换句话说, 根据基本属性错误, 有很大的倾向去性格地归因其他的行为. 当这种情况出现在价格促销时, 我们可以推断出消费者很有可能性格地归因公司的价格促销行为. 反而, 即使在这种情况下, 公司可以调整消费者的锚定性来降低性格归因的可能性. 另外, 不像多数对价格促销的长/短期影响的以往的研究, 只考虑价格促销对消费者的购买行为影响, 本 研究测试对质量认知的影响, 一个影响消费者购买行为的因素. 这些结果在实际工作方面有重要启示. 本研究的结果可以作为新产品有效的提供促销信息的指南. 如果品牌要避免错误的暗示, 比如在施行价格促销战略时被认为是产品的质量不好, 一定要为促销提供清晰合理的理由. 尤其是对那些以前没有进行过价格促销活动的公司来说, 提供明确的理由尤其重要. 不一致的行为可以导致消费者的不信任和焦虑. 这也是无止境的价格战的风险的重要因素之一. 没有事先通知的价格促销会使消费者怀疑, 但不会影响市场份额.

• 한국문헌정보학회지
• /
• 제24권
• /
• pp.289-332
• /
• 1993

In china, six bibliographies of offical historical books are evaluated at the most important things among the systematically-editing bibliographies. These bibliographies would be usful to study the orign of classical sciences and their development, bibliographic research of Chinese classics, bibliographic judgement on genuine books, titles, authors, volumes. They could be refered to research into graving, correcting, and existence of ancient books. therefore, these bibliographies would be applied to estimation the phase of scientific and cultural development. The study of these bibliographies has been not yet made in Korea. This thesis lays its importance on the background of their appearance, their classification norms, organizing system of their catalogue, and comparison between their difference. 1. Editing and compiling of Chilyak (칠약) by Liu Chin (유흠) and official histories played an important role of entering an apperance of historical book's bibliographies. Chilyak has been lost. However, its classification and compiling system of classical books would be traced by Hansoyemunji(한서예문지) of which basic system is similar to Chilyak. It classified books according to their scientific characteristic. If a few books didn't have their own categories, they were combined by the circles parallel to the books' characteristic. With the books classified under the same scientific characteristic, they were again divided into the scientific schools or structures. It also arranged the same kinds of books according to the chronology. The some books wi th duplicate subjects were classified multiplely by their duplicate subject. 2. Ssu-ma Chon's (사마천) The Historical Records (Saki, 사기) and Pan Ku's (반고) The History of the Former Han Dynasty (Hanso, 한서) has also took effects on appearance of historical books' bibliographies. Covering overall history, Saki was structured by the five parts: The basic annals(본기), the chronological tables (표), the documents (서), the hereditary houses (세가), biographies (열전). The basic annals dealt with kings and courts' affairs according to the chronology. The chronological tables was the records of the annals. The documents described overall the social and cultural systems. The hereditary houses recorded courts' meritorious officials and public figures. The biographies showed exemplars of seventy peoples selected by their social status. Pan Ku(반구)'s The History of the Former Han Dynasty(한서) deserved to be called the prototype for the offical histories after Saki's (사기; The Historical Records) apperance. Although it modelled on Saki, it had set up its own cataloguing system. It was organized by four parts; the basic annals (본기), the chronological tables (표), treatises(지), biographies (열전). The documents in the Hanso(한서) was converted into treatises(지). The hereditary houses and biographies were merged. For the first time, the treatise with The Yemunji could operate function for historical bibliographies. 3. There were six historical bibliographies: Hansoyemunji(한서예문지), Susokyongjeokji (수서경적지), Kudangsokyongjeokji(구당서경적지), Shindangsoyemunji (신당서예문지), Songsayemunji (송사예문지), Myongsayemunji (명사예문지). 1) Modelling on Liu Chin's Chilyak except Chipryak(집략), Hansoyemunji divided the characteristic of the books and documents into six parts: Yukrye(육예), Cheja(제자), Shibu(시부), Pyongsoh(병서), Susul(수술), Pangki(방기). Under six parts, there were thirty eight orders in Hansoyemunji. To its own classification, Hansoyemunji applied the Chilyak's theory of classification that the books or documents were managed according to characteristic of sciences, the difference of schools, the organization of sentences. However the overlapped subjects were deleted and unified into one. The books included into an unsuitable subject were corrected and converted into another. The Hansoyemunji consisted of main preface (Taesoh 대서), minor preface (Sosoh 소서) , the general preface (Chongso 총서). It also recorded the introduction of books and documents, the origin of sciences, the outline of subjects, and the establishment of orders. The books classified by the subject had title, author, and volumes. They were rearranged by titles and the chronological publication year. Sometimes author was the first access point to catalogue the books. If it was necessary for the books to take footnotes, detail notes were formed. The Volume number written consecutively to order and subject could clarify the quantity of books. 2) Refering to Classfication System by Seven Norms (칠분법) and Classification System by Four Norms(사분법), Susokyongjeokji(수서경적지) had accomplished the classification by four norms. In fact, its classification largely imitated Wanhyosoh(완효서)'s Chilrok(칠록), Susokyongjeokji's system of classification consisted of four parts-Kyung(경), Sa(사), Cha(자), Chip(칩). The four parts were divided into 40 orders. Its appendix was again divided into two parts, Buddihism and Taiosm. Under the two parts there were fifteen orders. Totally Susokyongjeokji was made of six parts and fifty five orders. In comparison with Hansoyemunji(한서예문지), it clearly showed the conception of Kyung, Sa, Cha, Chip. Especially it deserved to be paid attention that Hansoyemunji laied history off Chunchu(춘추) and removed history to Sabu(사부). However Chabu(사부) put many contrary subjects such as Cheja(제자), Kiye(기예), Sulsu(술수), Sosol(소설) into the same boundary, which committed errors insufficient theoretical basis. Anothor demerit of Susokyongjeokji was that it dealt with Taiosm scriptures and Buddism scriptures at the appendix because they were considered as quasi-religion. Its compilation of bibliographical facts consisted of main preface(Taesoh 대서), minor preface(Sosoh 소서), general preface (Chongsoh 총서), postscript (Husoh 후서). Its bibliological facts mainly focused on the titles. Its recorded authors' birth date and their position. It wrote the lost and existence of books consecutive to total number of books, which revealed total of the lost books in Su Dynasty. 3) Modelling on the basis of Kokumsorok(고분서록) and Naewaekyongrok(내외경록), Kudangsokyongjeokji(구당서경적지) had four parts and fourty five orders. It was estimated as the important role of establishing basic frame of classification by four norms in classification theory's history. However it had also its own limit. Editing and compling orders of Kudangsokyongjeokji had been not progressively changed. Its orders imitated by and large Susokyongjeokji. In Its system of organizing catalogue, with its minor preface and general preface deleting, Kudangsokyongjeokji by titles after orders sometimes broke out confusion because of unclear boundaries between orders. 4) Shindangsoyemunji(신당서예문지), adding 28,469 books to Kudangsokyongjeokji, recorded 82,384 books which were divided by four parts and fourty four orders. In comparison with Kudangkyongjeokj, Sindangsoyemunji corrected unclear order's norm. It merged the analogical norms four orders (for instance, Kohun 고훈 and Sohakryu 소학류) and seperated the different norms four orders (for example, Hyokyong 효경 and Noneuhryu 논어류, Chamwi 참위 and Kyonghaeryu 경해류, Pyonryon 편년 and Wisaryu 위사류). Recording kings' behaviors and speeches (Kikochuryu 기거주류) in the historical parts induced the concept of specfication category. For the first time, part of Chipbu (집부) set up the order of classification norm for historical and literatural books and documents (Munsaryu 문사류). Its editing and compiling had been more simplified than Kudangsokyongjeokji. Introduction was written at first part of bibliographies. Appendants except bibliographic items such subject, author, title, volume number, total were omitted. 5) Songsayemunji(송사예문지) were edited in the basis of combining Puksong(북송) and Namsong(남송), depending on Sabukuksayemunji(사부국사예문지). Generally Songsayemunji had lost a lot of bibliographical facts of many books. They were duplicated and wrongly classified books because it committed an error of the incorrectly annalistic editing. Particularly Namsong showed more open these defaults. Songsayemunji didin't include the books published since the king Youngchong(영종). Its system of classification was more better controlled. Chamwiryu(참위류) in the part of Kyongbu(경부) was omitted. In the part of history(Sabu 사부), recordings of kings' behaviors and speeches more merged in the annals. Historical abstract documents (Sachoryu 사초류) were seperately arranged. In the part of Chabu(자부), Myongdangkyongmaekryu(명당경맥류) and Euisulryu(의술류) were combined. Ohangryu(오행류) were laied off Shikuryu(시구류). In the part of Chipbu(집부), historical and literatural books (Munsaryu 문사류) were independentely arranged. There were the renamed orders; from Wisa(위사) to Paesa(패사), Chapsa (잡사) to Pyolsa(열사), Chapchonki(잡전기) to Chonki(전기), Ryusoh(류서) to Ryusa(류서). Introduction had only main preface. The books of each subject catalogued by title, the volume number, and author and arranged mainly by authors. Annotations were written consecutively after title and the volume number. In the afternote the number of not-treated books were revealed. Difference from Singdangsohyemunji(신당서예문지) were that the concept and boundary of orders became more clearer. It also wrote the number of books consecutive to main subject. 6) Modelling on Chonkyongdangsomok (경당서목), Myongsayemunji(명사예문지) was compiled in the basis of books and documents published in the Ming Danasty. In classification system, Myongsayemunji partly merged and the seperated some orders for it. It also deleted and renamed some of orders. In case of necessity, combining of orders' norm was occured particulary in the part of Sabu(사부) and Chabu(자부). Therefore these merging of orders norm didn't offer sufficient theretical background. For example, such demerits were seen in the case that historical books edited by annals were combined with offical historical ones which were differently compiled and edited from the former. In the part of Chabu(자부), it broke out another confusion that Pubga(법가), Meongga(명가), Mukga(묵가), Chonghweongka's(종횡가) thoughts were classified in the Chapka(잡가). Scriptures of Taiosim and Buddhism were seperated from each other. There were some deleted books such as Mokrokryu(목록류), Paesaryu(패사류) in the part of history (Sabu 사부) and Chosaryu(초사류) in the part of Chipbu(집부). The some in the each orders had been renamed. Imitating compiling system of Songsayemunji(송사예문지), with reffering to its differ-ence, Myongsayemunji(명사예문지) wrote the review and the change of the books by author. The number of not-treated books didn't appear at the total. It also deleted the total following main subject.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.