• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.3
• /
• pp.244-250
• /
• 2018

Multilateration acquires the transponder signal of target from receivers installed on the ground and calculates the position of the target using the difference of the signal acquisition time of each receiver. One of the factors that influence the positioning accuracy of Multilateration using the TDOA calculation method is the error due to the precision measurement of signal input time. When measuring the signal input time at the receiver, the input signal is sampled using the reference clock of the receiver and a reference sample having the same sampling rate is applied to the cross correlation technique. Therefore, the accuracy of the signal input time is proportional to the reference clock. In this paper, the algorithm for precisely measuring the signal input time by performing cross correlation between the input signal of the receiver and DRS(Delayed Reference Sample) is proposed. In order to verify this, we implemented the pulse signal of the transponder that is transmitted from the target using Matlab. Through the simulation, cross correlation between the proposed DRS and the input signal was performed. From this result, the performance of the precise measurement of signal input time was analyzed.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1993.06a
• /
• pp.210-214
• /
• 1993

There are two general techniques to observe particle movements in fluid. One is the acoustic time domain correlation technique and another is the frequency domain Doppler-shift techniques. Both techniques were reviewed and mentioned their some merits and demerits in ocean wave and current observation. Some possible application of acoustic time domain correlation technique in ocean wind wave measurement was discussed.

• ETRI Journal
• /
• v.36 no.1
• /
• pp.99-105
• /
• 2014

This paper presents a new locomotion mode recognition method based on a transformed correlation feature analysis using an electromyography (EMG) pattern. Each movement is recognized using six weighted subcorrelation filters, which are applied to the correlation feature analysis through the use of six time-domain features. The proposed method has a high recognition rate because it reflects the importance of the different features according to the movements and thereby enables one to recognize real-time EMG patterns, owing to the rapid execution of the correlation feature analysis. The experiment results show that the discriminating power of the proposed method is 85.89% (${\pm}2.5$) when walking on a level surface, 96.47% (${\pm}0.9$) when going up stairs, and 96.37% (${\pm}1.3$) when going down stairs for given normal movement data. This makes its accuracy and stability better than that found for the principal component analysis and linear discriminant analysis methods.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.447-450
• /
• 2004

This study was conducted to characterize groundwater and river-water fluctuations at a riverbank filtration site in Daesan-myeon adjacent to the Nakdong River, using time series analysis. Water levels from six observation wells from January 2003 to October 2003 were measured. The autocorrelation analysis indicates that the wells are divided into three groups: group 1 represents strong linearity and memory, group 2 intermediate linearity and memory, and group 3 weak linearity and memory. The analysis indicates that groundwater levels in different monitoring wells vary in response to river-water levels, groundwater withdrawal and seasonal rainfall. Cross-correlation was also divided into three groups. Group 1 shows the highest cross-correlation function (0.49 - 0.54) for a lag time of 0 hours, group 2 intermediate cross-correlation function (0.34 - 0.45), and group 3 the lowest cross-correlation function (0.23 - 0.25). Different cross-correlation functions among the 3 groups are interpreted as an effect of tile distance from the river to the pumping wells.

• Journal of Korean Society for Atmospheric Environment
• /
• v.9 no.3
• /
• pp.183-190
• /
• 1993

For the efficient control of photochemical smog materials, the researches on the change patterns of photochemical smog precursors are indispensable. In this study, a time-series analysis was performed for the auto-monitoring data of Kwanghwamun and Jamsil stations in 1990, and the change patterns of photochemical smog materials were studied. Especially, auto-correlation coefficients were analyzed to investigate the cyclic characteristics of pollutants in question and cross-correlation coefficients to investigate the correlations between pollutants adjusted for time lag and between $O_3$ and meteorological factors. Results of researches are as follows: First, in the case of NO and $NO_2$ intimately related to human activities, 12-hour cycle was prevalent. But $O_3$ showed 24-hour cycle. Second, NO showed a relatively high correlation with $O_3$ and usually developed into $O_3$ 5 to 7 hours later. Third, temperature, insolation intensity, and wind speed showed a positive correlation with $O_3$ while relative humidity a negative correlation.

• Korean Journal of Veterinary Research
• /
• v.44 no.2
• /
• pp.185-193
• /
• 2004

The effects of membrane lipid peroxidation and retinyl palmitate on rat liver microsomal functions were investigated in vitro. Rat liver homogenates exposed to oxygen tension for 0, 3, 6, 9 or12 hours and lipid peroxidation levels were evaluated by the measurements of fluorescence intensity, malondialdehyde (MDA) and retinyl palmitate. The fluorescence intensity of homogenates and microsomes were elevated and retinyl palmitate concentrations were decreased. But the concentration of MDA was not affected to exposure time. Therefore, fluorescence intensity and retinyl palmitate concentration were used to analyze the correlation between lipid peroxidation and microsomal functions. To investigate the liver microsomal functions, the microsome was isolated from rat liver homogenates exposed to oxygen. The concentration of cytochrome P450 and the activity of NADPH-cytochrome P450 reductase in liver microsomes were gradually decreased with increasing the exposure time. The correlation between fluorescence intensity of microsomes showed a very high inverse correlation of -0.97 and -0.93, respectively. The decrease of cytochrome P450 concentration was due to the regeneration of cytochrome P450 to cytochrome P420. Also, the activities of cytochrome P450-dependent aminopyrine demethylase and benzpyrene hydroxylase of liver microsomes were gradually decreased with increasing the exposure time. The correlation with fluorescence intensity of microsome showed a high inverse correlation of -0.97 and -0.91, respectively. The retinyl palmitate concentrations of rat liver homogenates were decreased with increasing the exposure time. The decrease of retinyl palmitate concentration was followed by a low concentration of cytochrome P450 and activity of NADPH-cytochrome P450 reductase. The correlation indicated high direct correlation of 0.92 and 0.93, respectively. The decrease of retinyl palmitate concentration was also accompanied by the reduction of aminopyrine demethylase and benzpyrene hydroxylase activities. The correlation was analyzed a high direct correlation of 0.90 and 0.85, respectively. In conclusion, these studies have shown that the membrane lipid peroxidation of rat liver microsome proportionally decreased microsomal enzyme activities in vitro experiments.

• Korean Journal of Optics and Photonics
• /
• v.19 no.1
• /
• pp.1-8
• /
• 2008

Shack-Hartmann sensors are widely employed as a wavefront measuring device in various applications. Adaptive optics is one of the major applications. Since an adaptive optics system should be operated in real-time, high-speed wavefront sensing is essential. In high-speed operation, integration time of an image detector is very short. In this case, noises such as readout noise and photon noise greatly influence the accuracy of wavefront sensing. Therefore a fast and noise-insensitive centroid finding algorithm is required for the real-time wavefront sensing. In this paper, the multi-resolution correlation method is proposed. By employing multi-resolution images, this method greatly reduces the computation time when compared to the fast Fourier transform (FFT) correlation method. The verification is performed through the computational simulation. In this paper, the center of mass method, correlation method and multi-resolution correlation method are employed to compare the measurement accuracy of the centroid finding algorithms. The accuracy of a Shack-Hartmann wavefront sensor using the proposed algorithm is proved to be comparable to that of the conventional correlation method.

• Journal of Information Technology Applications and Management
• /
• v.24 no.1
• /
• pp.157-167
• /
• 2017

This paper proposes a simple sound source localization (SSL) method based on signal energies comparison and partial cross correlation for TDOA computation. Many sound source localization methods include multiple TDOA computations in order to eliminate front-back confusion. Multiple TDOA computations however increase the methods' computation times which need to be as minimal as possible for real-time applications. Our aim in this paper is to achieve the same results of localization using fewer computations. Using three microphones, we first compare signal energies to predict which quadrant the sound source is in, and then we use partial cross correlation to estimate the TDOA value before computing the azimuth value. Also, we apply a threshold value to reinforce our prediction method. Our experimental results show that the proposed method has less computation time; spending approximately 30% less time than previous three microphone methods.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.3
• /
• pp.498-504
• /
• 2015

This paper proposed an Spread Spectrum Time Domain Reflectometry (SSTDR) using time-frequency correlation analysis in order to have more accurate fault determination and location detection than classical SSTDR despite increased signal attenuation due to the long distance to cable fault location. The proposed method was validated through comparison with classical SSTDR methods in open- and short-circuit fault detection experiments of low-voltage power cables. The experimental results showed that the proposed method can detect correlation coefficients at fault locations accurately despite reflected signal attenuation so that cable faults can be detected more accurately and clearly in comparison to existing methods.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.2
• /
• pp.459-466
• /
• 1999

I broadband ISDN every packet will show different result if it would be processed according to its usage by the server. That is, normal data won't show big differences if they would be processed at normal speed. But it will improve the quality of service to process some kinds of data - for example real time video or voice type data or some data for a bid to by something through the internet - more fast than the normal type data. solution for this problem was suggested - priority packets. But the analyses of them are under way. Son in this paper a switching system for an output queuing model in a single server was assumed and some packets were given priorities and analysed. And correlation, simulating real life situation, was given too. These packets were analysed through three cases, first packets having no correlation, second packets having only correlation and finally packets having priority three cases, first packets having no correlation, second packets having only correlation and finally packets having priority and correlation. The result showed that correlation doesn't affect the mean delay time and the high priority packets have improved mean delay time regardless of the arrival rate. Those packets were assumed to be fixed-sized like ATM fixed-sized cell and the contention strategy was assumed to be short bus contention method for the output queue, and the mean delay length and the maximum 버퍼 length not to lose any packets were analysed.